git.sur5r.net Git - u-boot/blob - include/configs/km/km83xx-common.h

   1 /*
   2  * (C) Copyright 2010
   3  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __CONFIG_KM83XX_H
   9 #define __CONFIG_KM83XX_H
  10
  11 /* include common defines/options for all Keymile boards */
  12 #include "keymile-common.h"
  13 #include "km-powerpc.h"
  14
  15 #define CONFIG_MISC_INIT_R
  16 /*
  17  * System Clock Setup
  18  */
  19 #define CONFIG_83XX_CLKIN               66000000
  20 #define CONFIG_SYS_CLK_FREQ             66000000
  21 #define CONFIG_83XX_PCICLK              66000000
  22
  23 /*
  24  * IMMR new address
  25  */
  26 #define CONFIG_SYS_IMMR         0xE0000000
  27
  28 /*
  29  * Bus Arbitration Configuration Register (ACR)
  30  */
  31 #define CONFIG_SYS_ACR_PIPE_DEP 3       /* pipeline depth 4 transactions */
  32 #define CONFIG_SYS_ACR_RPTCNT   3       /* 4 consecutive transactions */
  33 #define CONFIG_SYS_ACR_APARK    0       /* park bus to master (below) */
  34 #define CONFIG_SYS_ACR_PARKM    3       /* parking master = QuiccEngine */
  35
  36 /*
  37  * DDR Setup
  38  */
  39 #define CONFIG_SYS_DDR_BASE             0x00000000 /* DDR is system memory */
  40 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_BASE
  41 #define CONFIG_SYS_SDRAM_BASE2  (CONFIG_SYS_SDRAM_BASE + 0x10000000) /* +256M */
  42
  43 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
  44 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL   (DDR_SDRAM_CLK_CNTL_SS_EN | \
  45                                         DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
  46
  47 #define CFG_83XX_DDR_USES_CS0
  48
  49 /*
  50  * Manually set up DDR parameters
  51  */
  52 #define CONFIG_DDR_II
  53 #define CONFIG_SYS_DDR_SIZE             2048 /* MB */
  54
  55 /*
  56  * The reserved memory
  57  */
  58 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
  59 #define CONFIG_SYS_FLASH_BASE           0xF0000000
  60
  61 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
  62 #define CONFIG_SYS_RAMBOOT
  63 #endif
  64
  65 /* Reserve 768 kB for Mon */
  66 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
  67
  68 /*
  69  * Initial RAM Base Address Setup
  70  */
  71 #define CONFIG_SYS_INIT_RAM_LOCK
  72 #define CONFIG_SYS_INIT_RAM_ADDR        0xE6000000 /* Initial RAM address */
  73 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000 /* End of used area in RAM */
  74 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
  75                                                 GENERATED_GBL_DATA_SIZE)
  76
  77 /*
  78  * Init Local Bus Memory Controller:
  79  *
  80  * Bank Bus     Machine PortSz  Size  Device
  81  * ---- ---     ------- ------  -----  ------
  82  *  0   Local   GPCM    16 bit  256MB FLASH
  83  *  1   Local   GPCM     8 bit  128MB GPIO/PIGGY
  84  *
  85  */
  86 /*
  87  * FLASH on the Local Bus
  88  */
  89 #define CONFIG_SYS_FLASH_CFI            /* use the Common Flash Interface */
  90 #define CONFIG_FLASH_CFI_DRIVER         /* use the CFI driver */
  91 #define CONFIG_SYS_FLASH_SIZE           256 /* max FLASH size is 256M */
  92 #define CONFIG_SYS_FLASH_PROTECTION
  93 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  94
  95 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE
  96 #define CONFIG_SYS_LBLAWAR0_PRELIM      (LBLAWAR_EN | LBLAWAR_256MB)
  97
  98 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE | \
  99                                 BR_PS_16 | /* 16 bit port size */ \
 100                                 BR_MS_GPCM | /* MSEL = GPCM */ \
 101                                 BR_V)
 102
 103 #define CONFIG_SYS_OR0_PRELIM   (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) | \
 104                                 OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
 105                                 OR_GPCM_SCY_5 | \
 106                                 OR_GPCM_TRLX_SET | OR_GPCM_EAD)
 107
 108 #define CONFIG_SYS_MAX_FLASH_BANKS      1   /* max num of flash banks   */
 109 #define CONFIG_SYS_MAX_FLASH_SECT       512 /* max num of sects on one chip */
 110 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
 111
 112 /*
 113  * PRIO1/PIGGY on the local bus CS1
 114  */
 115 /* Window base at flash base */
 116 #define CONFIG_SYS_LBLAWBAR1_PRELIM     CONFIG_SYS_KMBEC_FPGA_BASE
 117 #define CONFIG_SYS_LBLAWAR1_PRELIM      (LBLAWAR_EN | LBLAWAR_128MB)
 118
 119 #define CONFIG_SYS_BR1_PRELIM   (CONFIG_SYS_KMBEC_FPGA_BASE | \
 120                                 BR_PS_8 | /* 8 bit port size */ \
 121                                 BR_MS_GPCM | /* MSEL = GPCM */ \
 122                                 BR_V)
 123 #define CONFIG_SYS_OR1_PRELIM   (MEG_TO_AM(CONFIG_SYS_KMBEC_FPGA_SIZE) | \
 124                                 OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
 125                                 OR_GPCM_SCY_2 | \
 126                                 OR_GPCM_TRLX_SET | OR_GPCM_EAD)
 127
 128 /*
 129  * Serial Port
 130  */
 131 #define CONFIG_CONS_INDEX       1
 132 #define CONFIG_SYS_NS16550_SERIAL
 133 #define CONFIG_SYS_NS16550_REG_SIZE     1
 134 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 135
 136 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
 137 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
 138
 139 /*
 140  * QE UEC ethernet configuration
 141  */
 142 #define CONFIG_UEC_ETH
 143 #define CONFIG_ETHPRIME         "UEC0"
 144
 145 #if !defined(CONFIG_MPC8309)
 146 #define CONFIG_UEC_ETH1         /* GETH1 */
 147 #define UEC_VERBOSE_DEBUG       1
 148 #endif
 149
 150 #ifdef CONFIG_UEC_ETH1
 151 #define CONFIG_SYS_UEC1_UCC_NUM 3       /* UCC4 */
 152 #define CONFIG_SYS_UEC1_RX_CLK          QE_CLK_NONE /* not used in RMII Mode */
 153 #define CONFIG_SYS_UEC1_TX_CLK          QE_CLK17
 154 #define CONFIG_SYS_UEC1_ETH_TYPE        FAST_ETH
 155 #define CONFIG_SYS_UEC1_PHY_ADDR        0
 156 #define CONFIG_SYS_UEC1_INTERFACE_TYPE  PHY_INTERFACE_MODE_RMII
 157 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
 158 #endif
 159
 160 /*
 161  * Environment
 162  */
 163
 164 #ifndef CONFIG_SYS_RAMBOOT
 165 #ifndef CONFIG_ENV_ADDR
 166 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + \
 167                                         CONFIG_SYS_MONITOR_LEN)
 168 #endif
 169 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K(one sector) for env */
 170 #ifndef CONFIG_ENV_OFFSET
 171 #define CONFIG_ENV_OFFSET       (CONFIG_SYS_MONITOR_LEN)
 172 #endif
 173
 174 /* Address and size of Redundant Environment Sector     */
 175 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + \
 176                                                 CONFIG_ENV_SECT_SIZE)
 177 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 178
 179 #else /* CFG_SYS_RAMBOOT */
 180 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 181 #define CONFIG_ENV_SIZE         0x2000
 182 #endif /* CFG_SYS_RAMBOOT */
 183
 184 /* I2C */
 185 #define CONFIG_SYS_I2C
 186 #define CONFIG_SYS_NUM_I2C_BUSES        4
 187 #define CONFIG_SYS_I2C_MAX_HOPS         1
 188 #define CONFIG_SYS_I2C_FSL
 189 #define CONFIG_SYS_FSL_I2C_SPEED        200000
 190 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 191 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 192 #define CONFIG_SYS_I2C_OFFSET           0x3000
 193 #define CONFIG_SYS_FSL_I2C2_SPEED       200000
 194 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 195 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 196 #define CONFIG_SYS_I2C_BUSES    {{0, {I2C_NULL_HOP} }, \
 197                 {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
 198                 {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
 199                 {1, {I2C_NULL_HOP} } }
 200
 201 #define CONFIG_KM_IVM_BUS               2       /* I2C2 (Mux-Port 1)*/
 202
 203 #if defined(CONFIG_CMD_NAND)
 204 #define CONFIG_NAND_KMETER1
 205 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 206 #define CONFIG_SYS_NAND_BASE            CONFIG_SYS_KMBEC_FPGA_BASE
 207 #endif
 208
 209 /*
 210  * For booting Linux, the board info and command line data
 211  * have to be in the first 8 MB of memory, since this is
 212  * the maximum mapped by the Linux kernel during initialization.
 213  */
 214 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)
 215
 216 /*
 217  * Core HID Setup
 218  */
 219 #define CONFIG_SYS_HID0_INIT            0x000000000
 220 #define CONFIG_SYS_HID0_FINAL           (HID0_ENABLE_MACHINE_CHECK | \
 221                                          HID0_ENABLE_INSTRUCTION_CACHE)
 222 #define CONFIG_SYS_HID2                 HID2_HBE
 223
 224 /*
 225  * MMU Setup
 226  */
 227
 228 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
 229
 230 /* DDR: cache cacheable */
 231 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | \
 232                                 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 233 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | \
 234                                         BATU_VS | BATU_VP)
 235 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 236 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 237
 238 /* IMMRBAR & PCI IO: cache-inhibit and guarded */
 239 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_IMMR | BATL_PP_RW | \
 240                                 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 241 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_IMMR | BATU_BL_4M | BATU_VS \
 242                                         | BATU_VP)
 243 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 244 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 245
 246 /* PRIO1, PIGGY:  icache cacheable, but dcache-inhibit and guarded */
 247 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_KMBEC_FPGA_BASE | BATL_PP_RW | \
 248                                 BATL_MEMCOHERENCE)
 249 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_KMBEC_FPGA_BASE | BATU_BL_128M | \
 250                                 BATU_VS | BATU_VP)
 251 #define CONFIG_SYS_DBAT2L       (CONFIG_SYS_KMBEC_FPGA_BASE | BATL_PP_RW | \
 252                                  BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 253 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 254
 255 /* FLASH: icache cacheable, but dcache-inhibit and guarded */
 256 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \
 257                                         BATL_MEMCOHERENCE)
 258 #define CONFIG_SYS_IBAT3U       (CONFIG_SYS_FLASH_BASE | BATU_BL_256M | \
 259                                         BATU_VS | BATU_VP)
 260 #define CONFIG_SYS_DBAT3L       (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \
 261                                  BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 262 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 263
 264 /* Stack in dcache: cacheable, no memory coherence */
 265 #define CONFIG_SYS_IBAT4L       (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW)
 266 #define CONFIG_SYS_IBAT4U       (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | \
 267                                         BATU_VS | BATU_VP)
 268 #define CONFIG_SYS_DBAT4L       CONFIG_SYS_IBAT4L
 269 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
 270
 271 /*
 272  * Internal Definitions
 273  */
 274 #define BOOTFLASH_START 0xF0000000
 275
 276 #define CONFIG_KM_CONSOLE_TTY   "ttyS0"
 277
 278 /*
 279  * Environment Configuration
 280  */
 281 #define CONFIG_ENV_OVERWRITE
 282 #ifndef CONFIG_KM_DEF_ENV               /* if not set by keymile-common.h */
 283 #define CONFIG_KM_DEF_ENV "km-common=empty\0"
 284 #endif
 285
 286 #ifndef CONFIG_KM_DEF_ARCH
 287 #define CONFIG_KM_DEF_ARCH      "arch=ppc_82xx\0"
 288 #endif
 289
 290 #define CONFIG_EXTRA_ENV_SETTINGS \
 291         CONFIG_KM_DEF_ENV                                               \
 292         CONFIG_KM_DEF_ARCH                                              \
 293         "newenv="                                                       \
 294                 "prot off "__stringify(CONFIG_ENV_ADDR)" +0x40000 && "  \
 295                 "era "__stringify(CONFIG_ENV_ADDR)" +0x40000\0"         \
 296         "unlock=yes\0"                                                  \
 297         ""
 298
 299 #if defined(CONFIG_UEC_ETH)
 300 #define CONFIG_HAS_ETH0
 301 #endif
 302
 303 #endif /* __CONFIG_KM83XX_H */