]> git.sur5r.net Git - u-boot/blob - include/configs/km8360.h
x86: Remove CONFIG_SYS_EARLY_PCI_INIT
[u-boot] / include / configs / km8360.h
1 /*
2  * (C) Copyright 2012
3  * Holger Brunck, Keymile GmbH Hannover, <holger.brunck@keymile.com>
4  * Christian Herzig, Keymile AG Switzerland, <christian.herzig@keymile.com>
5  *
6  * SPDX-License-Identifier:     GPL-2.0+
7  */
8
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11
12 #define CONFIG_DISPLAY_BOARDINFO
13
14 /* KMBEC FPGA (PRIO) */
15 #define CONFIG_SYS_KMBEC_FPGA_BASE      0xE8000000
16 #define CONFIG_SYS_KMBEC_FPGA_SIZE      64
17
18 #if defined CONFIG_KMETER1
19 #define CONFIG_HOSTNAME         kmeter1
20 #define CONFIG_KM_BOARD_NAME   "kmeter1"
21 #define CONFIG_KM_DEF_NETDEV    "netdev=eth2\0"
22 #elif defined CONFIG_KMCOGE5NE
23 #define CONFIG_HOSTNAME         kmcoge5ne
24 #define CONFIG_KM_BOARD_NAME    "kmcoge5ne"
25 #define CONFIG_KM_DEF_NETDEV    "netdev=eth1\0"
26 #define CONFIG_CMD_NAND
27 #define CONFIG_NAND_ECC_BCH
28 #define CONFIG_BCH
29 #define CONFIG_NAND_KMETER1
30 #define CONFIG_SYS_MAX_NAND_DEVICE              1
31 #define NAND_MAX_CHIPS                          1
32 #define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */
33
34 #define CONFIG_KM_UBI_PARTITION_NAME_BOOT       "ubi0"
35 #define CONFIG_KM_UBI_PARTITION_NAME_APP        "ubi1"
36 #define MTDIDS_DEFAULT                  "nor0=boot,nand0=app"
37
38 #define MTDPARTS_DEFAULT                "mtdparts="                     \
39         "boot:"                                                         \
40                 "768k(u-boot),"                                         \
41                 "128k(env),"                                            \
42                 "128k(envred),"                                         \
43                 "-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");"             \
44         "app:"                                                          \
45                 "-(" CONFIG_KM_UBI_PARTITION_NAME_APP ");"
46 #else
47 #error ("Board not supported")
48 #endif
49
50 /*
51  * High Level Configuration Options
52  */
53 #define CONFIG_QE                       /* Has QE */
54 #define CONFIG_MPC8360                  /* MPC8360 CPU specific */
55
56 #define CONFIG_SYS_TEXT_BASE    0xF0000000
57
58 /* include common defines/options for all 83xx Keymile boards */
59 #include "km/km83xx-common.h"
60
61 /*
62  * System IO Setup
63  */
64 #define CONFIG_SYS_SICRH                (SICRH_UC1EOBI | SICRH_UC2E1OBI)
65
66 /*
67  * Hardware Reset Configuration Word
68  */
69 #define CONFIG_SYS_HRCW_LOW (\
70         HRCWL_CSB_TO_CLKIN_4X1 | \
71         HRCWL_CORE_TO_CSB_2X1 | \
72         HRCWL_CE_PLL_VCO_DIV_2 | \
73         HRCWL_CE_TO_PLL_1X6)
74
75 #define CONFIG_SYS_HRCW_HIGH (\
76         HRCWH_CORE_ENABLE | \
77         HRCWH_FROM_0X00000100 | \
78         HRCWH_BOOTSEQ_DISABLE | \
79         HRCWH_SW_WATCHDOG_DISABLE | \
80         HRCWH_ROM_LOC_LOCAL_16BIT | \
81         HRCWH_BIG_ENDIAN | \
82         HRCWH_LALE_EARLY | \
83         HRCWH_LDP_CLEAR)
84
85 /**
86  * DDR RAM settings
87  */
88 #define CONFIG_SYS_DDR_SDRAM_CFG (\
89         SDRAM_CFG_SDRAM_TYPE_DDR2 | \
90         SDRAM_CFG_SREN | \
91         SDRAM_CFG_HSE)
92
93 #define CONFIG_SYS_DDR_SDRAM_CFG2       0x00401000
94
95 #ifdef CONFIG_KMCOGE5NE
96 /**
97  * KMCOGE5NE has 512 MB RAM
98  */
99 #define CONFIG_SYS_DDR_CS0_CONFIG (\
100         CSCONFIG_EN | \
101         CSCONFIG_AP | \
102         CSCONFIG_ODT_RD_ONLY_CURRENT | \
103         CSCONFIG_BANK_BIT_3 | \
104         CSCONFIG_ROW_BIT_13 | \
105         CSCONFIG_COL_BIT_10)
106 #else
107 #define CONFIG_SYS_DDR_CS0_CONFIG       (CSCONFIG_EN | CSCONFIG_AP | \
108                                          CSCONFIG_ROW_BIT_13 | \
109                                          CSCONFIG_COL_BIT_10 | \
110                                          CSCONFIG_ODT_RD_ONLY_CURRENT)
111 #endif
112
113 #define CONFIG_SYS_DDR_CLK_CNTL (\
114         DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
115
116 #define CONFIG_SYS_DDR_INTERVAL (\
117         (0x080 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
118         (0x203 << SDRAM_INTERVAL_REFINT_SHIFT))
119
120 #define CONFIG_SYS_DDR_CS0_BNDS                 0x0000007f
121
122 #define CONFIG_SYS_DDRCDR (\
123         DDRCDR_EN | \
124         DDRCDR_Q_DRN)
125 #define CONFIG_SYS_DDR_MODE             0x47860452
126 #define CONFIG_SYS_DDR_MODE2            0x8080c000
127
128 #define CONFIG_SYS_DDR_TIMING_0 (\
129         (2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
130         (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
131         (6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
132         (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
133         (0 << TIMING_CFG0_WWT_SHIFT) | \
134         (0 << TIMING_CFG0_RRT_SHIFT) | \
135         (0 << TIMING_CFG0_WRT_SHIFT) | \
136         (0 << TIMING_CFG0_RWT_SHIFT))
137
138 #define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_50) | \
139                                  (2 << TIMING_CFG1_WRTORD_SHIFT) | \
140                                  (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
141                                  (3 << TIMING_CFG1_WRREC_SHIFT) | \
142                                  (7 << TIMING_CFG1_REFREC_SHIFT) | \
143                                  (3 << TIMING_CFG1_ACTTORW_SHIFT) | \
144                                  (8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
145                                  (3 << TIMING_CFG1_PRETOACT_SHIFT))
146
147 #define CONFIG_SYS_DDR_TIMING_2 (\
148         (0xa << TIMING_CFG2_FOUR_ACT_SHIFT) | \
149         (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \
150         (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
151         (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
152         (4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
153         (5 << TIMING_CFG2_CPO_SHIFT) | \
154         (0 << TIMING_CFG2_ADD_LAT_SHIFT))
155
156 #define CONFIG_SYS_DDR_TIMING_3                 0x00000000
157
158 /* EEprom support */
159 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2
160
161 /*
162  * Local Bus Configuration & Clock Setup
163  */
164 #define CONFIG_SYS_LCRR_DBYP            LCRR_DBYP
165 #define CONFIG_SYS_LCRR_EADC            LCRR_EADC_2
166 #define CONFIG_SYS_LCRR_CLKDIV          LCRR_CLKDIV_4
167
168 /*
169  * PAXE on the local bus CS3
170  */
171 #define CONFIG_SYS_PAXE_BASE            0xA0000000
172 #define CONFIG_SYS_PAXE_SIZE            256
173
174 #define CONFIG_SYS_LBLAWBAR3_PRELIM     CONFIG_SYS_PAXE_BASE
175
176 #define CONFIG_SYS_LBLAWAR3_PRELIM      0x8000001C /* 512MB window size */
177
178 #define CONFIG_SYS_BR3_PRELIM (\
179         CONFIG_SYS_PAXE_BASE | \
180         (1 << BR_PS_SHIFT) | \
181         BR_V)
182
183 #define CONFIG_SYS_OR3_PRELIM (\
184         MEG_TO_AM(CONFIG_SYS_PAXE_SIZE) | \
185         OR_GPCM_CSNT | \
186         OR_GPCM_ACS_DIV2 | \
187         OR_GPCM_SCY_2 | \
188         OR_GPCM_TRLX | \
189         OR_GPCM_EAD)
190
191 #ifdef CONFIG_KMCOGE5NE
192 /*
193  * BFTIC3 on the local bus CS4
194  */
195 #define CONFIG_SYS_BFTIC3_BASE                  0xB0000000
196 #define CONFIG_SYS_BFTIC3_SIZE                  256
197
198 #define CONFIG_SYS_BR4_PRELIM (\
199         CONFIG_SYS_BFTIC3_BASE |\
200         (1 << BR_PS_SHIFT) | \
201         BR_V)
202
203 #define CONFIG_SYS_OR4_PRELIM (\
204         MEG_TO_AM(CONFIG_SYS_BFTIC3_SIZE) |\
205         OR_GPCM_CSNT | \
206         OR_GPCM_ACS_DIV2 |\
207         OR_GPCM_SCY_2 |\
208         OR_GPCM_TRLX |\
209         OR_GPCM_EAD)
210 #endif
211
212 /*
213  * MMU Setup
214  */
215
216 /* PAXE:  icache cacheable, but dcache-inhibit and guarded */
217 #define CONFIG_SYS_IBAT5L (\
218         CONFIG_SYS_PAXE_BASE | \
219         BATL_PP_10 | \
220         BATL_MEMCOHERENCE)
221
222 #define CONFIG_SYS_IBAT5U (\
223         CONFIG_SYS_PAXE_BASE | \
224         BATU_BL_256M | \
225         BATU_VS | \
226         BATU_VP)
227
228 #define CONFIG_SYS_DBAT5L (\
229         CONFIG_SYS_PAXE_BASE | \
230         BATL_PP_10 | \
231         BATL_CACHEINHIBIT | \
232         BATL_GUARDEDSTORAGE)
233
234 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
235
236
237 #ifdef CONFIG_KMCOGE5NE
238 /* BFTIC3:  icache cacheable, but dcache-inhibit and guarded */
239 #define CONFIG_SYS_IBAT6L (\
240         CONFIG_SYS_BFTIC3_BASE | \
241         BATL_PP_10 | \
242         BATL_MEMCOHERENCE)
243
244 #define CONFIG_SYS_IBAT6U (\
245         CONFIG_SYS_BFTIC3_BASE | \
246         BATU_BL_256M | \
247         BATU_VS | \
248         BATU_VP)
249
250 #define CONFIG_SYS_DBAT6L (\
251         CONFIG_SYS_BFTIC3_BASE | \
252         BATL_PP_10 | \
253         BATL_CACHEINHIBIT | \
254         BATL_GUARDEDSTORAGE)
255
256 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
257
258 /* DDR/LBC SDRAM next 256M: cacheable */
259 #define CONFIG_SYS_IBAT7L (\
260         CONFIG_SYS_SDRAM_BASE2 |\
261         BATL_PP_10 |\
262         BATL_CACHEINHIBIT |\
263         BATL_GUARDEDSTORAGE)
264
265 #define CONFIG_SYS_IBAT7U (\
266         CONFIG_SYS_SDRAM_BASE2 |\
267         BATU_BL_256M |\
268         BATU_VS |\
269         BATU_VP)
270 /* enable POST tests */
271 #define CONFIG_POST (CONFIG_SYS_POST_MEMORY|CONFIG_SYS_POST_MEM_REGIONS)
272 #define CONFIG_POST_EXTERNAL_WORD_FUNCS /* use own functions, not generic */
273 #define CPM_POST_WORD_ADDR  CONFIG_SYS_MEMTEST_END
274 #define CONFIG_TESTPIN_REG  gprt3       /* for kmcoge5ne */
275 #define CONFIG_TESTPIN_MASK 0x20        /* for kmcoge5ne */
276 #define CONFIG_CMD_DIAG /* so that testpin is inquired for POST test */
277
278 #else
279 #define CONFIG_SYS_IBAT6L       (0)
280 #define CONFIG_SYS_IBAT6U       (0)
281 #define CONFIG_SYS_IBAT7L       (0)
282 #define CONFIG_SYS_IBAT7U       (0)
283 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
284 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
285 #endif
286
287 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
288 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
289
290 #endif /* CONFIG */