git.sur5r.net Git - u-boot/blob - include/configs/km_kirkwood.h

   1 /*
   2  * (C) Copyright 2009
   3  * Marvell Semiconductor <www.marvell.com>
   4  * Prafulla Wadaskar <prafulla@marvell.com>
   5  *
   6  * (C) Copyright 2009
   7  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   8  *
   9  * (C) Copyright 2011-2012
  10  * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com
  11  * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
  12  *
  13  * SPDX-License-Identifier:     GPL-2.0+
  14  */
  15
  16 /*
  17  * for linking errors see
  18  * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
  19  */
  20
  21 #ifndef _CONFIG_KM_KIRKWOOD_H
  22 #define _CONFIG_KM_KIRKWOOD_H
  23
  24 /* KM_KIRKWOOD */
  25 #if defined(CONFIG_KM_KIRKWOOD)
  26 #define CONFIG_IDENT_STRING             "\nKeymile Kirkwood"
  27 #define CONFIG_HOSTNAME                 km_kirkwood
  28 #define CONFIG_KM_DISABLE_PCIE
  29 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
  30
  31 /* KM_KIRKWOOD_PCI */
  32 #elif defined(CONFIG_KM_KIRKWOOD_PCI)
  33 #define CONFIG_IDENT_STRING             "\nKeymile Kirkwood PCI"
  34 #define CONFIG_HOSTNAME                 km_kirkwood_pci
  35 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
  36 #define CONFIG_KM_FPGA_CONFIG
  37 #define CONFIG_KM_UBI_PART_BOOT_OPTS            ",2048"
  38 #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
  39
  40 /* KM_KIRKWOOD_128M16 */
  41 #elif defined(CONFIG_KM_KIRKWOOD_128M16)
  42 #define CONFIG_IDENT_STRING             "\nKeymile Kirkwood 128M16"
  43 #define CONFIG_HOSTNAME                 km_kirkwood_128m16
  44 #undef CONFIG_SYS_KWD_CONFIG
  45 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
  46 #define CONFIG_KM_DISABLE_PCIE
  47 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
  48
  49 /* KM_NUSA / KM_SUGP1 */
  50 #elif defined(CONFIG_KM_NUSA) || defined(CONFIG_KM_SUGP1)
  51 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
  52
  53 # if defined(CONFIG_KM_NUSA)
  54 #define CONFIG_IDENT_STRING             "\nKeymile NUSA"
  55 #define CONFIG_HOSTNAME                 kmnusa
  56 # elif defined(CONFIG_KM_SUGP1)
  57 #define CONFIG_IDENT_STRING             "\nKeymile SUGP1"
  58 #define CONFIG_HOSTNAME                 kmsugp1
  59 #define KM_PCIE_RESET_MPP7
  60 #endif
  61
  62 #undef CONFIG_SYS_KWD_CONFIG
  63 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
  64 #define CONFIG_KM_ENV_IS_IN_SPI_NOR
  65 #define CONFIG_KM_FPGA_CONFIG
  66 #define CONFIG_KM_PIGGY4_88E6352
  67 #define CONFIG_MV88E6352_SWITCH
  68 #define CONFIG_KM_MVEXTSW_ADDR          0x10
  69
  70 /* KM_MGCOGE3UN */
  71 #elif defined(CONFIG_KM_MGCOGE3UN)
  72 #define CONFIG_IDENT_STRING             "\nKeymile COGE3UN"
  73 #define CONFIG_HOSTNAME                 mgcoge3un
  74 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
  75 #undef CONFIG_SYS_KWD_CONFIG
  76 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-memphis.cfg
  77 #define CONFIG_KM_BOARD_EXTRA_ENV       "waitforne=true\0"
  78 #define CONFIG_PIGGY_MAC_ADRESS_OFFSET  3
  79 #define CONFIG_KM_DISABLE_PCIE
  80 #define CONFIG_KM_PIGGY4_88E6061
  81
  82 /* KMCOGE5UN */
  83 #elif defined(CONFIG_KM_COGE5UN)
  84 #define CONFIG_IDENT_STRING             "\nKeymile COGE5UN"
  85 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
  86 #undef  CONFIG_SYS_KWD_CONFIG
  87 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg
  88 #define CONFIG_KM_ENV_IS_IN_SPI_NOR
  89 #define CONFIG_PIGGY_MAC_ADRESS_OFFSET  3
  90 #define CONFIG_HOSTNAME                 kmcoge5un
  91 #define CONFIG_KM_DISABLE_PCIE
  92 #define CONFIG_KM_PIGGY4_88E6352
  93
  94 /* KM_PORTL2 */
  95 #elif defined(CONFIG_KM_PORTL2)
  96 #define CONFIG_IDENT_STRING             "\nKeymile Port-L2"
  97 #define CONFIG_HOSTNAME                 portl2
  98 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
  99 #define CONFIG_KM_PIGGY4_88E6061
 100
 101 /* KM_SUV31 */
 102 #elif defined(CONFIG_KM_SUV31)
 103 #define CONFIG_KM_IVM_BUS               1       /* I2C2 (Mux-Port 1)*/
 104 #define CONFIG_IDENT_STRING             "\nKeymile SUV31"
 105 #define CONFIG_HOSTNAME                 kmsuv31
 106 #undef CONFIG_SYS_KWD_CONFIG
 107 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
 108 #define CONFIG_KM_ENV_IS_IN_SPI_NOR
 109 #define CONFIG_KM_FPGA_CONFIG
 110 #define CONFIG_KM_UBI_PART_BOOT_OPTS            ",2048"
 111 #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
 112 #else
 113 #error ("Board unsupported")
 114 #endif
 115
 116 /* include common defines/options for all arm based Keymile boards */
 117 #include "km/km_arm.h"
 118
 119 #ifndef CONFIG_KM_ENV_IS_IN_SPI_NOR
 120 #define KM_ENV_BUS      5       /* I2C2 (Mux-Port 5)*/
 121 #endif
 122
 123 #if defined(CONFIG_KM_PIGGY4_88E6352)
 124 /*
 125  * Some keymile boards like mgcoge5un & nusa1 have their PIGGY4 connected via
 126  * an Marvell 88E6352 simple switch.
 127  * In this case we have to change the default settings for the etherent mac.
 128  * There is NO ethernet phy. The ARM and Switch are conencted directly over
 129  * RGMII in MAC-MAC mode
 130  * In this case 1GBit full duplex and autoneg off
 131  */
 132 #define PORT_SERIAL_CONTROL_VALUE               ( \
 133         MVGBE_FORCE_LINK_PASS                       | \
 134         MVGBE_DIS_AUTO_NEG_FOR_DUPLX            | \
 135         MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL        | \
 136         MVGBE_ADV_NO_FLOW_CTRL                      | \
 137         MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX     | \
 138         MVGBE_FORCE_BP_MODE_NO_JAM                  | \
 139         (1 << 9) /* Reserved bit has to be 1 */ | \
 140         MVGBE_DO_NOT_FORCE_LINK_FAIL            | \
 141         MVGBE_DIS_AUTO_NEG_SPEED_GMII           | \
 142         MVGBE_DTE_ADV_0                                 | \
 143         MVGBE_MIIPHY_MAC_MODE                       | \
 144         MVGBE_AUTO_NEG_NO_CHANGE                    | \
 145         MVGBE_MAX_RX_PACKET_1552BYTE            | \
 146         MVGBE_CLR_EXT_LOOPBACK                      | \
 147         MVGBE_SET_FULL_DUPLEX_MODE                  | \
 148         MVGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\
 149         MVGBE_SET_GMII_SPEED_TO_1000        |\
 150         MVGBE_SET_MII_SPEED_TO_100)
 151
 152 #endif
 153
 154 #ifdef CONFIG_KM_PIGGY4_88E6061
 155 /*
 156  * Some keymile boards like mgcoge3un have their PIGGY4 connected via
 157  * an Marvell 88E6061 simple switch.
 158  * In this case we have to change the default settings for the
 159  * ethernet phy connected to the kirkwood.
 160  * In this case 100MB full duplex and autoneg off
 161  */
 162 #define PORT_SERIAL_CONTROL_VALUE               ( \
 163         MVGBE_FORCE_LINK_PASS                   | \
 164         MVGBE_DIS_AUTO_NEG_FOR_DUPLX            | \
 165         MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL        | \
 166         MVGBE_ADV_NO_FLOW_CTRL                  | \
 167         MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX     | \
 168         MVGBE_FORCE_BP_MODE_NO_JAM              | \
 169         (1 << 9) /* Reserved bit has to be 1 */ | \
 170         MVGBE_DO_NOT_FORCE_LINK_FAIL            | \
 171         MVGBE_DIS_AUTO_NEG_SPEED_GMII           | \
 172         MVGBE_DTE_ADV_0                         | \
 173         MVGBE_MIIPHY_MAC_MODE                   | \
 174         MVGBE_AUTO_NEG_NO_CHANGE                | \
 175         MVGBE_MAX_RX_PACKET_1552BYTE            | \
 176         MVGBE_CLR_EXT_LOOPBACK                  | \
 177         MVGBE_SET_FULL_DUPLEX_MODE              | \
 178         MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX        |\
 179         MVGBE_SET_GMII_SPEED_TO_10_100  |\
 180         MVGBE_SET_MII_SPEED_TO_100)
 181 #endif
 182
 183 #ifdef CONFIG_KM_DISABLE_PCI
 184 #undef  CONFIG_KIRKWOOD_PCIE_INIT
 185 #endif
 186
 187
 188 #endif /* _CONFIG_KM_KIRKWOOD */