2 * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
4 * SPDX-License-Identifier: GPL-2.0+
7 #ifndef _CONFIG_LACIE_KW_H
8 #define _CONFIG_LACIE_KW_H
11 * Machine number definition
13 #if defined(CONFIG_INETSPACE_V2)
14 #define CONFIG_MACH_TYPE MACH_TYPE_INETSPACE_V2
15 #elif defined(CONFIG_NETSPACE_V2)
16 #define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_V2
17 #elif defined(CONFIG_NETSPACE_LITE_V2)
18 #define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_LITE_V2
19 #elif defined(CONFIG_NETSPACE_MINI_V2)
20 #define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_MINI_V2
21 #elif defined(CONFIG_NETSPACE_MAX_V2)
22 #define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_MAX_V2
23 #elif defined(CONFIG_D2NET_V2)
24 #define CONFIG_MACH_TYPE MACH_TYPE_D2NET_V2
25 #elif defined(CONFIG_NET2BIG_V2)
26 #define CONFIG_MACH_TYPE MACH_TYPE_NET2BIG_V2
28 #error "Unknown board"
32 * High Level Configuration Options (easy to change)
34 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
36 #if defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2)
37 #define CONFIG_KW88F6192
39 #define CONFIG_KW88F6281
41 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
44 * Commands configuration
46 #ifndef CONFIG_NETSPACE_MINI_V2 /* No USB ports on Network Space v2 Mini */
50 * Core clock definition
52 #define CONFIG_SYS_TCLK 166000000 /* 166MHz */
57 #define CONFIG_NR_DRAM_BANKS 1
60 * Different SDRAM configuration and size for some of the boards derived
61 * from the Network Space v2
63 #if defined(CONFIG_INETSPACE_V2)
64 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-is2.cfg
65 #elif defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2)
66 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-ns2l.cfg
70 * mv-common.h should be defined after CMD configs since it used them
71 * to enable certain macros
73 #include "mv-common.h"
75 /* Remove or override few declarations from mv-common.h */
76 #undef CONFIG_ENV_SPI_MAX_HZ
77 #undef CONFIG_SYS_IDE_MAXBUS
78 #undef CONFIG_SYS_IDE_MAXDEVICE
79 #define CONFIG_ENV_SPI_MAX_HZ 20000000 /* 20Mhz */
82 * Enable platform initialisation via misc_init_r() function
84 #define CONFIG_MISC_INIT_R
87 * Ethernet Driver configuration
90 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
91 #define CONFIG_NETCONSOLE
95 * SATA Driver configuration
97 #ifdef CONFIG_MVSATA_IDE
98 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
99 #if defined(CONFIG_NETSPACE_MAX_V2) || defined(CONFIG_D2NET_V2) || \
100 defined(CONFIG_NET2BIG_V2)
101 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
102 #define CONFIG_SYS_IDE_MAXBUS 2
103 #define CONFIG_SYS_IDE_MAXDEVICE 2
105 #define CONFIG_SYS_IDE_MAXBUS 1
106 #define CONFIG_SYS_IDE_MAXDEVICE 1
108 #endif /* CONFIG_MVSATA_IDE */
111 * Enable GPI0 support
113 #define CONFIG_KIRKWOOD_GPIO
118 #ifdef CONFIG_CMD_I2C
119 /* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */
120 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
121 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16-byte page size */
122 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit device address */
123 #if defined(CONFIG_NET2BIG_V2)
124 #define CONFIG_SYS_I2C_G762_ADDR 0x3e
126 #endif /* CONFIG_CMD_I2C */
133 * File systems support
137 * Environment variables configurations
139 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64KB */
140 #define CONFIG_ENV_SIZE 0x1000 /* 4KB */
141 #define CONFIG_ENV_ADDR 0x70000
142 #define CONFIG_ENV_OFFSET 0x70000 /* env starts here */
145 * Default environment variables
147 #define CONFIG_BOOTCOMMAND \
148 "dhcp && run netconsole; " \
149 "if run usbload || run diskload; then bootm; fi"
151 #define CONFIG_EXTRA_ENV_SETTINGS \
155 "bootfile=uImage\0" \
156 "loadaddr=0x800000\0" \
159 "set stdin $stdin,nc; " \
160 "set stdout $stdout,nc; " \
161 "set stderr $stderr,nc;\0" \
162 "diskload=ide reset && " \
163 "ext2load ide 0:1 $loadaddr /boot/$bootfile\0" \
164 "usbload=usb start && " \
165 "fatload usb 0:1 $loadaddr /boot/$bootfile\0"
167 #endif /* _CONFIG_LACIE_KW_H */