2 * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
4 * SPDX-License-Identifier: GPL-2.0+
7 #ifndef _CONFIG_LACIE_KW_H
8 #define _CONFIG_LACIE_KW_H
11 * Generic board support
13 #define CONFIG_SYS_GENERIC_BOARD
16 * Machine number definition
18 #if defined(CONFIG_INETSPACE_V2)
19 #define CONFIG_MACH_TYPE MACH_TYPE_INETSPACE_V2
20 #define CONFIG_IDENT_STRING " IS v2"
21 #elif defined(CONFIG_NETSPACE_V2)
22 #define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_V2
23 #define CONFIG_IDENT_STRING " NS v2"
24 #elif defined(CONFIG_NETSPACE_LITE_V2)
25 #define MACH_TYPE_NETSPACE_LITE_V2 2983 /* missing in mach-types.h */
26 #define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_LITE_V2
27 #define CONFIG_IDENT_STRING " NS v2 Lite"
28 #elif defined(CONFIG_NETSPACE_MINI_V2)
29 #define MACH_TYPE_NETSPACE_MINI_V2 2831 /* missing in mach-types.h */
30 #define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_MINI_V2
31 #define CONFIG_IDENT_STRING " NS v2 Mini"
32 #elif defined(CONFIG_NETSPACE_MAX_V2)
33 #define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_MAX_V2
34 #define CONFIG_IDENT_STRING " NS Max v2"
35 #elif defined(CONFIG_D2NET_V2)
36 #define CONFIG_MACH_TYPE MACH_TYPE_D2NET_V2
37 #define CONFIG_IDENT_STRING " D2 v2"
38 #elif defined(CONFIG_NET2BIG_V2)
39 #define CONFIG_MACH_TYPE MACH_TYPE_NET2BIG_V2
40 #define CONFIG_IDENT_STRING " 2Big v2"
42 #error "Unknown board"
46 * High Level Configuration Options (easy to change)
48 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
50 #if defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2)
51 #define CONFIG_KW88F6192
53 #define CONFIG_KW88F6281
55 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
58 * Commands configuration
60 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
61 #define CONFIG_CMD_ENV
62 #define CONFIG_CMD_DHCP
63 #define CONFIG_CMD_PING
65 #define CONFIG_CMD_I2C
66 #define CONFIG_CMD_IDE
67 #ifndef CONFIG_NETSPACE_MINI_V2 /* No USB ports on Network Space v2 Mini */
68 #define CONFIG_CMD_USB
72 * Core clock definition
74 #define CONFIG_SYS_TCLK 166000000 /* 166MHz */
79 #define CONFIG_NR_DRAM_BANKS 1
82 * Different SDRAM configuration and size for some of the boards derived
83 * from the Network Space v2
85 #if defined(CONFIG_INETSPACE_V2)
86 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-is2.cfg
87 #elif defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2)
88 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-ns2l.cfg
92 * mv-common.h should be defined after CMD configs since it used them
93 * to enable certain macros
95 #include "mv-common.h"
97 /* Remove or override few declarations from mv-common.h */
99 #undef CONFIG_ENV_SPI_MAX_HZ
100 #undef CONFIG_SYS_IDE_MAXBUS
101 #undef CONFIG_SYS_IDE_MAXDEVICE
102 #undef CONFIG_SYS_PROMPT
103 #define CONFIG_ENV_SPI_MAX_HZ 20000000 /* 20Mhz */
104 #if defined(CONFIG_D2NET_V2)
105 #define CONFIG_SYS_PROMPT "d2v2> "
106 #elif defined(CONFIG_NET2BIG_V2)
107 #define CONFIG_SYS_PROMPT "2big2> "
109 #define CONFIG_SYS_PROMPT "ns2> "
113 * Enable platform initialisation via misc_init_r() function
115 #define CONFIG_MISC_INIT_R
118 * Ethernet Driver configuration
120 #ifdef CONFIG_CMD_NET
121 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
122 #define CONFIG_NETCONSOLE
126 * SATA Driver configuration
128 #ifdef CONFIG_MVSATA_IDE
129 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
130 #if defined(CONFIG_NETSPACE_MAX_V2) || defined(CONFIG_D2NET_V2) || \
131 defined(CONFIG_NET2BIG_V2)
132 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
133 #define CONFIG_SYS_IDE_MAXBUS 2
134 #define CONFIG_SYS_IDE_MAXDEVICE 2
136 #define CONFIG_SYS_IDE_MAXBUS 1
137 #define CONFIG_SYS_IDE_MAXDEVICE 1
139 #endif /* CONFIG_MVSATA_IDE */
142 * Enable GPI0 support
144 #define CONFIG_KIRKWOOD_GPIO
149 #ifdef CONFIG_CMD_I2C
150 /* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */
151 #define CONFIG_CMD_EEPROM
152 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
153 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16-byte page size */
154 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit device address */
155 #if defined(CONFIG_NET2BIG_V2)
156 #define CONFIG_SYS_I2C_G762_ADDR 0x3e
158 #endif /* CONFIG_CMD_I2C */
163 #define CONFIG_DOS_PARTITION
164 #define CONFIG_EFI_PARTITION
167 * File systems support
169 #define CONFIG_CMD_EXT2
170 #define CONFIG_CMD_FAT
173 * Use the HUSH parser
175 #define CONFIG_SYS_HUSH_PARSER
178 * Console configuration
180 #define CONFIG_CONSOLE_MUX
181 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
184 * Enable device tree support
186 #define CONFIG_OF_LIBFDT
189 * Environment variables configurations
191 #define CONFIG_ENV_IS_IN_SPI_FLASH
192 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64KB */
193 #define CONFIG_ENV_SIZE 0x1000 /* 4KB */
194 #define CONFIG_ENV_ADDR 0x70000
195 #define CONFIG_ENV_OFFSET 0x70000 /* env starts here */
198 * Default environment variables
200 #define CONFIG_BOOTARGS "console=ttyS0,115200"
202 #define CONFIG_BOOTCOMMAND \
203 "dhcp && run netconsole; " \
204 "if run usbload || run diskload; then bootm; fi"
206 #define CONFIG_EXTRA_ENV_SETTINGS \
210 "bootfile=uImage\0" \
211 "loadaddr=0x800000\0" \
214 "set stdin $stdin,nc; " \
215 "set stdout $stdout,nc; " \
216 "set stderr $stderr,nc;\0" \
217 "diskload=ide reset && " \
218 "ext2load ide 0:1 $loadaddr /boot/$bootfile\0" \
219 "usbload=usb start && " \
220 "fatload usb 0:1 $loadaddr /boot/$bootfile\0"
222 #endif /* _CONFIG_LACIE_KW_H */