2 * See file CREDITS for list of people who contributed to this
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License as
7 * published by the Free Software Foundation; either version 2 of
8 * the License, or (at your option) any later version.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
25 * If we are developing, we might want to start armboot from ram
26 * so we MUST NOT initialize critical regs like mem-timing ...
28 #define CONFIG_INIT_CRITICAL /* undef for developing */
32 #define MACH_TYPE_LPD7A400 389
35 * This board uses the logic LH7A400-10 card engine
37 #include <configs/lpd7a400-10.h>
39 #define CONFIG_LPD7A400 /* Logic LH7A400 SDK */
41 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
42 #define CONFIG_SETUP_MEMORY_TAGS 1
43 #define CONFIG_INITRD_TAG 1
46 * Size of malloc() pool
48 #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
49 #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
52 * select serial console configuration
54 #define CONFIG_CONSOLE_UART2 /* UART2 LH7A40x for console */
56 /* allow to overwrite serial and ethaddr */
57 #define CONFIG_ENV_OVERWRITE
59 #define CONFIG_BAUDRATE 115200
60 #define CONFIG_IPADDR 192.168.1.100
61 #define CONFIG_NETMASK 255.255.1.0
62 #define CONFIG_SERVERIP 192.168.1.1
64 #define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */
67 #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING) & ~(CFG_CMD_CACHE))
69 #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DATE)
73 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
74 #include <cmd_confdefs.h>
76 #define CONFIG_BOOTDELAY 3
78 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
79 #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
80 /* what's this ? it's not used anywhere */
81 #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
85 * Miscellaneous configurable options
87 #define CFG_LONGHELP /* undef to save memory */
88 #define CFG_PROMPT "LPD7A400> " /* Monitor Command Prompt */
89 #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
90 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
91 #define CFG_MAXARGS 16 /* max number of command args */
92 #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
94 #define CFG_MEMTEST_START 0xc0300000 /* memtest works on */
95 #define CFG_MEMTEST_END 0xc0500000 /* 2 MB in DRAM */
97 #undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
99 #define CFG_LOAD_ADDR 0xc0f00000 /* default load address */
101 /* valid baudrates */
102 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
104 /* size and location of u-boot in flash */
105 #define CFG_MONITOR_BASE CFG_FLASH_BASE
106 #define CFG_MONITOR_LEN (256<<10)
108 #define CFG_ENV_IS_IN_FLASH 1
110 /* Address and size of Primary Environment Sector */
111 #define CFG_ENV_ADDR (CFG_FLASH_BASE + 0xFC0000)
112 #define CFG_ENV_SIZE 0x40000
114 #endif /* __LPD7A400_H_ */