]> git.sur5r.net Git - u-boot/blob - include/configs/ls1012a_common.h
Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot
[u-boot] / include / configs / ls1012a_common.h
1 /*
2  * Copyright 2016 Freescale Semiconductor
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6
7 #ifndef __LS1012A_COMMON_H
8 #define __LS1012A_COMMON_H
9
10 #define CONFIG_FSL_LAYERSCAPE
11 #define CONFIG_GICV2
12
13 #include <asm/arch/config.h>
14 #include <asm/arch/stream_id_lsch2.h>
15
16 #define CONFIG_SUPPORT_RAW_INITRD
17
18 #define CONFIG_DISPLAY_BOARDINFO_LATE
19
20 #define CONFIG_SYS_TEXT_BASE            0x40100000
21
22 #define CONFIG_SYS_CLK_FREQ             125000000
23
24 #define CONFIG_SKIP_LOWLEVEL_INIT
25
26 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
27 #define CONFIG_SYS_LOAD_ADDR    (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
28
29 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000
30 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY       0
31 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
32 #define CONFIG_SYS_DDR_BLOCK2_BASE     0x880000000ULL
33
34 /* Generic Timer Definitions */
35 #define COUNTER_FREQUENCY               CONFIG_SYS_CLK_FREQ/4   /* 25MHz */
36
37 /* CSU */
38 #define CONFIG_LAYERSCAPE_NS_ACCESS
39
40 /* Size of malloc() pool */
41 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 128 * 1024)
42
43 /*SPI device */
44 #ifdef CONFIG_QSPI_BOOT
45 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
46 #define CONFIG_SYS_FMAN_FW_ADDR         0x400d0000
47 #define CONFIG_ENV_SPI_BUS              0
48 #define CONFIG_ENV_SPI_CS               0
49 #define CONFIG_ENV_SPI_MAX_HZ           1000000
50 #define CONFIG_ENV_SPI_MODE             0x03
51 #define CONFIG_SPI_FLASH_SPANSION
52 #define CONFIG_FSL_SPI_INTERFACE
53 #define CONFIG_SF_DATAFLASH
54
55 #define CONFIG_FSL_QSPI
56 #define QSPI0_AMBA_BASE         0x40000000
57 #define CONFIG_SPI_FLASH_SPANSION
58
59 #define FSL_QSPI_FLASH_SIZE             SZ_64M
60 #define FSL_QSPI_FLASH_NUM              2
61
62 /*
63  * Environment
64  */
65 #define CONFIG_ENV_OVERWRITE
66
67 #define CONFIG_ENV_SIZE                 0x40000          /* 256KB */
68 #define CONFIG_ENV_OFFSET               0x200000        /* 2MB */
69 #define CONFIG_ENV_SECT_SIZE            0x40000
70 #endif
71
72 /* I2C */
73 #define CONFIG_SYS_I2C
74 #define CONFIG_SYS_I2C_MXC
75 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
76 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
77
78 #define CONFIG_CONS_INDEX       1
79 #define CONFIG_SYS_NS16550_SERIAL
80 #define CONFIG_SYS_NS16550_REG_SIZE     1
81 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
82
83 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
84
85 /* Command line configuration */
86 #undef CONFIG_CMD_IMLS
87
88 #define CONFIG_SYS_HZ                   1000
89
90 #define CONFIG_HWCONFIG
91 #define HWCONFIG_BUFFER_SIZE            128
92
93 /* Initial environment variables */
94 #define CONFIG_EXTRA_ENV_SETTINGS               \
95         "verify=no\0"                           \
96         "loadaddr=0x80100000\0"                 \
97         "kernel_addr=0x100000\0"                \
98         "fdt_high=0xffffffffffffffff\0"         \
99         "initrd_high=0xffffffffffffffff\0"      \
100         "kernel_start=0xa00000\0"               \
101         "kernel_load=0xa0000000\0"              \
102         "kernel_size=0x2800000\0"               \
103
104 #define CONFIG_BOOTCOMMAND              "sf probe 0:0; sf read $kernel_load "\
105                                         "$kernel_start $kernel_size && "\
106                                         "bootm $kernel_load"
107
108 /* Monitor Command Prompt */
109 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
110 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
111                                         sizeof(CONFIG_SYS_PROMPT) + 16)
112 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE /* Boot args buffer */
113 #define CONFIG_SYS_LONGHELP
114 #define CONFIG_CMDLINE_EDITING          1
115 #define CONFIG_AUTO_COMPLETE
116 #define CONFIG_SYS_MAXARGS              64      /* max command args */
117
118 #define CONFIG_PANIC_HANG
119 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
120
121 #include <asm/arch/soc.h>
122
123 #endif /* __LS1012A_COMMON_H */