2 * Copyright 2016 Freescale Semiconductor
4 * SPDX-License-Identifier: GPL-2.0+
7 #ifndef __LS1012A_COMMON_H
8 #define __LS1012A_COMMON_H
10 #define CONFIG_FSL_LAYERSCAPE
13 #include <asm/arch/config.h>
14 #define CONFIG_SYS_NO_FLASH
16 #define CONFIG_SUPPORT_RAW_INITRD
18 #define CONFIG_DISPLAY_BOARDINFO_LATE
20 #define CONFIG_SYS_TEXT_BASE 0x40100000
22 #define CONFIG_SYS_CLK_FREQ 125000000
24 #define CONFIG_SKIP_LOWLEVEL_INIT
25 #define CONFIG_BOARD_EARLY_INIT_F 1
27 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
28 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
30 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
31 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
32 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
34 /* Generic Timer Definitions */
35 #define COUNTER_FREQUENCY CONFIG_SYS_CLK_FREQ/4 /* 25MHz */
38 #define CONFIG_LAYERSCAPE_NS_ACCESS
40 /* Size of malloc() pool */
41 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
44 #ifdef CONFIG_QSPI_BOOT
45 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
46 #define CONFIG_SYS_FMAN_FW_ADDR 0x400d0000
47 #define CONFIG_ENV_SPI_BUS 0
48 #define CONFIG_ENV_SPI_CS 0
49 #define CONFIG_ENV_SPI_MAX_HZ 1000000
50 #define CONFIG_ENV_SPI_MODE 0x03
51 #define CONFIG_SPI_FLASH_SPANSION
52 #define CONFIG_FSL_SPI_INTERFACE
53 #define CONFIG_SF_DATAFLASH
55 #define CONFIG_FSL_QSPI
56 #define QSPI0_AMBA_BASE 0x40000000
57 #define CONFIG_SPI_FLASH_SPANSION
58 #define CONFIG_SPI_FLASH_BAR
60 #define FSL_QSPI_FLASH_SIZE (1 << 24)
61 #define FSL_QSPI_FLASH_NUM 2
66 #define CONFIG_ENV_OVERWRITE
68 #define CONFIG_ENV_IS_IN_SPI_FLASH
69 #define CONFIG_ENV_SIZE 0x40000 /* 256KB */
70 #define CONFIG_ENV_OFFSET 0x200000 /* 2MB */
71 #define CONFIG_ENV_SECT_SIZE 0x40000
75 #define CONFIG_SYS_I2C
76 #define CONFIG_SYS_I2C_MXC
77 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
78 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
80 #define CONFIG_CONS_INDEX 1
81 #define CONFIG_SYS_NS16550_SERIAL
82 #define CONFIG_SYS_NS16550_REG_SIZE 1
83 #define CONFIG_SYS_NS16550_CLK (get_serial_clock())
85 #define CONFIG_BAUDRATE 115200
86 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
88 /* Command line configuration */
89 #define CONFIG_CMD_ENV
90 #undef CONFIG_CMD_IMLS
92 #define CONFIG_ARCH_EARLY_INIT_R
94 #define CONFIG_SYS_HZ 1000
96 #define CONFIG_HWCONFIG
97 #define HWCONFIG_BUFFER_SIZE 128
99 /* Initial environment variables */
100 #define CONFIG_EXTRA_ENV_SETTINGS \
102 "loadaddr=0x80100000\0" \
103 "kernel_addr=0x100000\0" \
104 "fdt_high=0xffffffffffffffff\0" \
105 "initrd_high=0xffffffffffffffff\0" \
106 "kernel_start=0xa00000\0" \
107 "kernel_load=0xa0000000\0" \
108 "kernel_size=0x2800000\0" \
110 #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \
111 "earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
112 #define CONFIG_BOOTCOMMAND "sf probe 0:0; sf read $kernel_load "\
113 "$kernel_start $kernel_size && "\
116 /* Monitor Command Prompt */
117 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
118 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
119 sizeof(CONFIG_SYS_PROMPT) + 16)
120 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */
121 #define CONFIG_SYS_LONGHELP
122 #define CONFIG_CMDLINE_EDITING 1
123 #define CONFIG_AUTO_COMPLETE
124 #define CONFIG_SYS_MAXARGS 64 /* max command args */
126 #define CONFIG_PANIC_HANG
127 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
129 #include <asm/fsl_secure_boot.h>
131 #endif /* __LS1012A_COMMON_H */