2 * ML300.h: ML300 specific config options
4 * http://www.xilinx.com/ml300
11 * This program is free software; you can redistribute it and/or modify it
12 * under the terms of the GNU General Public License as published by the
13 * Free Software Foundation; either version 2 of the License, or (at your
14 * option) any later version.
17 * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
18 * COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
19 * ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
20 * XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
21 * FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR
22 * OBTAINING ANY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
23 * XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
24 * THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
25 * WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
26 * CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
27 * FITNESS FOR A PARTICULAR PURPOSE.
30 * Xilinx products are not intended for use in life support appliances,
31 * devices, or systems. Use in such applications is expressly prohibited.
34 * (c) Copyright 2002 Xilinx Inc.
35 * All rights reserved.
38 * You should have received a copy of the GNU General Public License along
39 * with this program; if not, write to the Free Software Foundation, Inc.,
40 * 675 Mass Ave, Cambridge, MA 02139, USA.
48 /* #define ET_DEBUG 1 */
51 * High Level Configuration Options
55 #define CONFIG_405 1 /* This is a PPC405 CPU */
56 #define CONFIG_4xx 1 /* ...member of PPC4xx family */
57 #define CONFIG_XILINX_ML300 1 /* ...on a Xilinx ML300 board */
59 #define CFG_ENV_IS_IN_EEPROM 1 /* environment is in EEPROM */
61 /* following are used only if env is in EEPROM */
62 #ifdef CFG_ENV_IS_IN_EEPROM
63 #define CFG_I2C_EEPROM_ADDR XPAR_PERSISTENT_0_IIC_0_EEPROMADDR
64 #define CFG_I2C_EEPROM_ADDR_LEN 1
65 #define CFG_ENV_OFFSET XPAR_PERSISTENT_0_IIC_0_BASEADDR
66 #define CONFIG_MISC_INIT_R 1 /* used to call out convert_env() */
67 #define CONFIG_ENV_OVERWRITE 1 /* allow users to update ethaddr and serial# */
70 #include "../board/xilinx/ml300/xparameters.h"
72 #define CFG_NO_FLASH 1 /* no flash */
73 #define CFG_ENV_SIZE XPAR_PERSISTENT_0_IIC_0_HIGHADDR - XPAR_PERSISTENT_0_IIC_0_BASEADDR + 1
74 #define CONFIG_BAUDRATE 9600
75 #define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
77 #define CONFIG_BOOTCOMMAND "bootp" /* autoboot command */
79 #define CONFIG_BOOTARGS "console=ttyS0,9600 ip=off " \
80 "root=/dev/xsysace/disc0/part3 rw"
82 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
83 #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
85 #define REMOVE_COMMANDS (CFG_CMD_FLASH | CFG_CMD_LOADS | CFG_CMD_FAT | \
87 #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_NET) \
90 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
91 #include <cmd_confdefs.h>
93 /* #define CONFIG_SYS_CLK_FREQ XPAR_CORE_CLOCK_FREQ_HZ */
97 * Miscellaneous configurable options
99 #define CFG_LONGHELP /* undef to save memory */
100 #define CFG_PROMPT "=> " /* Monitor Command Prompt */
102 #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
104 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
105 #define CFG_MAXARGS 16 /* max number of command args */
106 #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
108 #define CFG_MEMTEST_START 0x0400000 /* memtest works on */
109 #define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
111 #define CFG_DUART_CHAN 0
112 #define CFG_NS16550_REG_SIZE -4
113 #define CFG_NS16550 1
114 #define CFG_INIT_CHAN1 1
116 /* The following table includes the supported baudrates */
117 #define CFG_BAUDRATE_TABLE \
118 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
120 #define CFG_LOAD_ADDR 0x400000 /* default load address */
121 #define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
123 #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
125 /*-----------------------------------------------------------------------
126 * Start addresses for the final memory configuration
127 * (Set up by the startup code)
128 * Please note that CFG_SDRAM_BASE _must_ start at 0
130 #define CFG_SDRAM_BASE 0x00000000
131 #define CFG_MONITOR_BASE 0x04000000
132 #define CFG_MONITOR_LEN (192 * 1024) /* Reserve 196 kB for Monitor */
133 #define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
136 * For booting Linux, the board info and command line data
137 * have to be in the first 8 MB of memory, since this is
138 * the maximum mapped by the Linux kernel during initialization.
140 #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
142 /*-----------------------------------------------------------------------
143 * Cache Configuration
145 #define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs */
146 #define CFG_CACHELINE_SIZE 32 /* ... */
148 /*-----------------------------------------------------------------------
149 * Definitions for initial stack pointer and data area (in DPRAM)
152 #define CFG_INIT_RAM_ADDR 0x800000 /* inside of SDRAM */
153 #define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
154 #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
155 #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
156 #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
159 * Internal Definitions
163 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
164 #define BOOTFLAG_WARM 0x02 /* Software reboot */
166 #endif /* __CONFIG_H */