git.sur5r.net Git - u-boot/blob - include/configs/motionpro.h

   1 /*
   2  * (C) Copyright 2003-2007
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * Based on Motion-PRO board config file by Robert McCullough, rob@promessinc.com
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 /*
  14  * High Level Configuration Options
  15  */
  16
  17 /* CPU and board */
  18 #define CONFIG_MPC5200          1       /* This is a MPC5200 CPU */
  19 #define CONFIG_MOTIONPRO        1       /* ... on Promess Motion-PRO board */
  20 #define CONFIG_DISPLAY_BOARDINFO
  21
  22 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
  23
  24 #define CONFIG_SYS_TEXT_BASE    0xfff00000
  25
  26 /*
  27  * BOOTP options
  28  */
  29 #define CONFIG_BOOTP_BOOTFILESIZE
  30 #define CONFIG_BOOTP_BOOTPATH
  31 #define CONFIG_BOOTP_GATEWAY
  32 #define CONFIG_BOOTP_HOSTNAME
  33
  34 /*
  35  * Command line configuration.
  36  */
  37 #define CONFIG_CMD_ASKENV
  38 #define CONFIG_CMD_BEDBUG
  39 #define CONFIG_CMD_DATE
  40 #define CONFIG_CMD_DTT
  41 #define CONFIG_CMD_EEPROM
  42 #define CONFIG_CMD_FAT
  43 #define CONFIG_CMD_IDE
  44 #define CONFIG_CMD_IMMAP
  45 #define CONFIG_CMD_JFFS2
  46 #define CONFIG_CMD_MII
  47 #define CONFIG_CMD_REGINFO
  48
  49 /*
  50  * Serial console configuration
  51  */
  52 #define CONFIG_PSC_CONSOLE      1       /* console is on PSC1 */
  53 #define CONFIG_NETCONSOLE       1       /* network console */
  54 #define CONFIG_BAUDRATE         115200
  55 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200, 230400 }
  56
  57 /*
  58  * Ethernet configuration
  59  */
  60 #define CONFIG_MPC5xxx_FEC      1
  61 #define CONFIG_MPC5xxx_FEC_MII100
  62 #define CONFIG_PHY_ADDR         0x2
  63 #define CONFIG_PHY_TYPE         0x79c874
  64 #define CONFIG_RESET_PHY_R      1
  65
  66 /*
  67  * Autobooting
  68  */
  69 #define CONFIG_BOOTDELAY        2       /* autoboot after 2 seconds */
  70 #undef CONFIG_BOOTARGS
  71
  72 #define CONFIG_CMDLINE_EDITING          1       /* add command line history     */
  73
  74 #define CONFIG_VERSION_VARIABLE 1       /* include version env variable */
  75
  76 /*
  77  * Default environment settings
  78  */
  79 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  80         "netdev=eth0\0"                                                 \
  81         "hostname=motionpro\0"                                          \
  82         "netmask=255.255.255.0\0"                                       \
  83         "ipaddr=192.168.1.106\0"                                        \
  84         "serverip=192.168.1.100\0"                                      \
  85         "gatewayip=192.168.1.100\0"                                     \
  86         "console=ttyPSC0,115200\0"                                      \
  87         "u-boot_addr=400000\0"                                          \
  88         "kernel_addr=400000\0"                                          \
  89         "fdt_addr=700000\0"                                             \
  90         "ramdisk_addr=800000\0"                                         \
  91         "multi_image_addr=800000\0"                                     \
  92         "rootpath=/opt/eldk-4.2/ppc_6xx\0"                              \
  93         "u-boot=/tftpboot/motionpro/u-boot.bin\0"                       \
  94         "bootfile=/tftpboot/motionpro/uImage\0"                         \
  95         "fdt_file=/tftpboot/motionpro/motionpro.dtb\0"                  \
  96         "ramdisk_file=/tftpboot/motionpro/uRamdisk\0"                   \
  97         "multi_image_file=kernel+initrd+dtb.img\0"                      \
  98         "load=tftp ${u-boot_addr} ${u-boot}\0"                          \
  99         "update=prot off fff00000 +${filesize};"                        \
 100                 "era fff00000 +${filesize}; "                           \
 101                 "cp.b ${u-boot_addr} fff00000 ${filesize};"             \
 102                 "prot on fff00000 +${filesize}\0"                       \
 103         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 104         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 105                 "nfsroot=${serverip}:${rootpath}\0"                     \
 106         "fat_args=setenv bootargs root=/dev/sda rw\0"                   \
 107         "mtdids=nor0=ff000000.flash\0"                                  \
 108         "mtdparts=ff000000.flash:13m(fs),2m(kernel),384k(uboot),"       \
 109                                 "128k(env),128k(redund_env),"           \
 110                                 "128k(dtb),128k(user_data)\0"           \
 111         "addcons=setenv bootargs ${bootargs} console=${console}\0"      \
 112         "addmtd=setenv bootargs ${bootargs} mtdparts=${mtdparts}\0"     \
 113         "addip=setenv bootargs ${bootargs} "                            \
 114                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
 115                 "${netmask}:${hostname}:${netdev}:off panic=1 "         \
 116                 "console=${console}\0"                                  \
 117         "net_nfs=tftp ${kernel_addr} ${bootfile}; "                     \
 118                 "tftp ${fdt_addr} ${fdt_file}; "                        \
 119                 "run nfsargs addip addmtd; "                            \
 120                 "bootm ${kernel_addr} - ${fdt_addr}\0"                  \
 121         "net_self=tftp ${kernel_addr} ${bootfile}; "                    \
 122                 "tftp ${fdt_addr} ${fdt_file}; "                        \
 123                 "tftp ${ramdisk_addr} ${ramdisk_file}; "                \
 124                 "nfs ${ramdisk_addr} ${serverip}:${rootpath}/images/uRamdisk; " \
 125                 "run ramargs addip addcons addmtd; "                    \
 126                 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"    \
 127         "fat_multi=run fat_args addip addmtd; fatload ide 0:1 "         \
 128                 "${multi_image_addr} ${multi_image_file}; "             \
 129                 "bootm ${multi_image_addr}\0"                           \
 130         ""
 131 #define CONFIG_BOOTCOMMAND      "run fat_multi"
 132
 133 /*
 134  * do board-specific init
 135  */
 136 #define CONFIG_BOARD_EARLY_INIT_R       1
 137
 138 /*
 139  * Low level configuration
 140  */
 141
 142 /*
 143  * Clock configuration: SYS_XTALIN = 33MHz
 144  */
 145 #define CONFIG_SYS_MPC5XXX_CLKIN        33000000
 146
 147 /*
 148  * Set IPB speed to 100MHz
 149  */
 150 #define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK
 151
 152 /*
 153  * Memory map
 154  */
 155 /*
 156  * Warning!!! with the current BestComm Task, MBAR MUST BE set to 0xf0000000.
 157  * Setting MBAR to otherwise will cause system hang when using SmartDMA such
 158  * as network commands.
 159  */
 160 #define CONFIG_SYS_MBAR                 0xf0000000
 161 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 162
 163 /*
 164  * If building for running out of SDRAM, then MBAR has been set up beforehand
 165  * (e.g., by the BDI). Otherwise we must specify the default boot-up value of
 166  * MBAR, as given in the doccumentation.
 167  */
 168 #if CONFIG_SYS_TEXT_BASE == 0x00100000
 169 #define CONFIG_SYS_DEFAULT_MBAR 0xf0000000
 170 #else /* CONFIG_SYS_TEXT_BASE != 0x00100000 */
 171 #define CONFIG_SYS_DEFAULT_MBAR 0x80000000
 172 #define CONFIG_SYS_LOWBOOT              1
 173 #endif /* CONFIG_SYS_TEXT_BASE == 0x00100000 */
 174
 175 /* Use SRAM until RAM will be available */
 176 #define CONFIG_SYS_INIT_RAM_ADDR        MPC5XXX_SRAM
 177 #define CONFIG_SYS_INIT_RAM_SIZE        MPC5XXX_SRAM_SIZE
 178
 179 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 180 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 181
 182 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 183 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 184 #define CONFIG_SYS_RAMBOOT              1
 185 #endif
 186
 187 #define CONFIG_SYS_MONITOR_LEN          (384 << 10)     /* 384 kB for Monitor */
 188 #define CONFIG_SYS_MALLOC_LEN           (1024 << 10)    /* 1 MiB for malloc() */
 189 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* initial mem map for Linux */
 190
 191 /*
 192  * Chip selects configuration
 193  */
 194 /* Boot Chipselect */
 195 #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
 196 #define CONFIG_SYS_BOOTCS_SIZE          CONFIG_SYS_FLASH_SIZE
 197 #define CONFIG_SYS_BOOTCS_CFG           0x00045D00
 198
 199 /* Flash memory addressing */
 200 #define CONFIG_SYS_CS0_START            CONFIG_SYS_FLASH_BASE
 201 #define CONFIG_SYS_CS0_SIZE             CONFIG_SYS_FLASH_SIZE
 202 #define CONFIG_SYS_CS0_CFG              CONFIG_SYS_BOOTCS_CFG
 203
 204 /* Dual Port SRAM -- Kollmorgen Drive memory addressing */
 205 #define CONFIG_SYS_CS1_START            0x50000000
 206 #define CONFIG_SYS_CS1_SIZE             0x10000
 207 #define CONFIG_SYS_CS1_CFG              0x05055800
 208
 209 /* Local register access */
 210 #define CONFIG_SYS_CS2_START            0x50010000
 211 #define CONFIG_SYS_CS2_SIZE             0x10000
 212 #define CONFIG_SYS_CS2_CFG              0x05055800
 213
 214 /* Anybus CompactCom Module memory addressing */
 215 #define CONFIG_SYS_CS3_START            0x50020000
 216 #define CONFIG_SYS_CS3_SIZE             0x10000
 217 #define CONFIG_SYS_CS3_CFG              0x05055800
 218
 219 /* No burst and dead cycle = 2 for all CSs */
 220 #define CONFIG_SYS_CS_BURST             0x00000000
 221 #define CONFIG_SYS_CS_DEADCYCLE 0x22222222
 222
 223 /*
 224  * SDRAM configuration
 225  */
 226 /* 2 x MT48LC16M16A2BG-75 IT:D, CASL 3, 32 bit data bus */
 227 #define SDRAM_CONFIG1           0x62322900
 228 #define SDRAM_CONFIG2           0x88c70000
 229 #define SDRAM_CONTROL           0x504f0000
 230 #define SDRAM_MODE              0x00cd0000
 231
 232 /*
 233  * Flash configuration
 234  */
 235 #define CONFIG_SYS_FLASH_CFI            1       /* Flash is CFI conformant */
 236 #define CONFIG_FLASH_CFI_DRIVER 1
 237 #define CONFIG_SYS_FLASH_BASE           0xff000000
 238 #define CONFIG_SYS_FLASH_SIZE           0x01000000
 239 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max num of memory banks */
 240 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE }
 241 #define CONFIG_SYS_MAX_FLASH_SECT       128     /* max num of sects on one chip */
 242 #define CONFIG_FLASH_16BIT              /* Flash is 16-bit */
 243
 244 /*
 245  * MTD configuration
 246  */
 247 #define CONFIG_CMD_MTDPARTS
 248 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
 249 #define CONFIG_FLASH_CFI_MTD
 250 #define MTDIDS_DEFAULT          "nor0=motionpro-0"
 251 #define MTDPARTS_DEFAULT        "mtdparts=motionpro-0:"                   \
 252                                         "13m(fs),2m(kernel),384k(uboot)," \
 253                                         "128k(env),128k(redund_env),"     \
 254                                         "128k(dtb),-(user_data)"
 255
 256 /*
 257  * IDE/ATA configuration
 258  */
 259 #define CONFIG_SYS_ATA_BASE_ADDR        MPC5XXX_ATA
 260 #define CONFIG_SYS_IDE_MAXBUS           1
 261 #define CONFIG_SYS_IDE_MAXDEVICE        1
 262 #define CONFIG_IDE_PREINIT
 263
 264 #define CONFIG_SYS_ATA_DATA_OFFSET      0x0060
 265 #define CONFIG_SYS_ATA_REG_OFFSET       CONFIG_SYS_ATA_DATA_OFFSET
 266 #define CONFIG_SYS_ATA_STRIDE           4
 267 #define CONFIG_DOS_PARTITION
 268
 269 /*
 270  * I2C configuration
 271  */
 272 #define CONFIG_HARD_I2C         1       /* I2C with hardware support */
 273 #define CONFIG_SYS_I2C_MODULE           2       /* select I2C module #2 */
 274 #define CONFIG_SYS_I2C_SPEED            100000  /* 100 kHz */
 275 #define CONFIG_SYS_I2C_SLAVE            0x7F
 276
 277 /*
 278  * EEPROM configuration
 279  */
 280 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 281 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       1       /* 2 bytes per write cycle */
 282 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5       /* 2ms/cycle + 3ms extra */
 283
 284 /*
 285  * RTC configuration
 286  */
 287 #define CONFIG_RTC_DS1337       1
 288 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 289
 290 /*
 291  * Status LED configuration
 292  */
 293 #define CONFIG_STATUS_LED               /* Status LED enabled */
 294 #define CONFIG_BOARD_SPECIFIC_LED
 295
 296 #define ENABLE_GPIO_OUT         0x00000024
 297 #define LED_ON                  0x00000010
 298
 299 #ifndef __ASSEMBLY__
 300 /*
 301  * In case of Motion-PRO, a LED is identified by its corresponding
 302  * GPT Enable and Mode Select Register.
 303  */
 304 typedef volatile unsigned long * led_id_t;
 305
 306 extern void __led_init(led_id_t id, int state);
 307 extern void __led_toggle(led_id_t id);
 308 extern void __led_set(led_id_t id, int state);
 309 #endif /* __ASSEMBLY__ */
 310
 311 /*
 312  * Temperature sensor
 313  */
 314 #define CONFIG_DTT_LM75         1
 315 #define CONFIG_DTT_SENSORS      { 0x49 }
 316
 317 /*
 318  * Environment settings
 319  */
 320 #define CONFIG_ENV_IS_IN_FLASH  1
 321 /* This has to be a multiple of the Flash sector size */
 322 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 323 #define CONFIG_ENV_SIZE         0x1000
 324 #define CONFIG_ENV_SECT_SIZE    0x20000
 325
 326 /* Configuration of redundant environment */
 327 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
 328 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 329
 330 /*
 331  * Pin multiplexing configuration
 332  */
 333
 334 /* PSC1: UART1
 335  * PSC2: GPIO (default)
 336  * PSC3: GPIO (default)
 337  * USB: 2xUART4/5
 338  * Ethernet: Ethernet 100Mbit with MD
 339  * Timer: CAN2/GPIO
 340  * PSC6/IRDA: GPIO (default)
 341  */
 342 #define CONFIG_SYS_GPS_PORT_CONFIG      0x1105a004
 343
 344 /*
 345  * Motion-PRO's CPLD revision control register
 346  */
 347 #define CPLD_REV_REGISTER       (CONFIG_SYS_CS2_START + 0x06)
 348
 349 /*
 350  * Miscellaneous configurable options
 351  */
 352 #define CONFIG_SYS_LONGHELP                     /* undef to save memory    */
 353 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
 354 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)      /* Print Buffer Size */
 355 #define CONFIG_SYS_MAXARGS              16              /* max number of command args */
 356 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 357
 358 #define CONFIG_SYS_MEMTEST_START        0x00100000      /* memtest works on */
 359 #define CONFIG_SYS_MEMTEST_END          0x03e00000      /* 1 ... 62 MiB in DRAM */
 360 #define CONFIG_SYS_ALT_MEMTEST
 361
 362 #define CONFIG_SYS_LOAD_ADDR            0x200000        /* default kernel load addr */
 363
 364 /*
 365  * Various low-level settings
 366  */
 367 #define CONFIG_SYS_HID0_INIT            HID0_ICE | HID0_ICFI
 368 #define CONFIG_SYS_HID0_FINAL           HID0_ICE
 369
 370 #define CONFIG_SYS_CACHELINE_SIZE       32      /* For MPC5xxx CPUs */
 371
 372 /* Not needed for MPC 5xxx U-Boot, but used by tools/updater */
 373 #define CONFIG_SYS_RESET_ADDRESS        0xfff00100
 374
 375 #define OF_CPU                  "PowerPC,5200@0"
 376 #define OF_SOC                  "soc5200@f0000000"
 377 #define OF_TBCLK                (bd->bi_busfreq / 4)
 378 #define OF_STDOUT_PATH          "/soc5200@f0000000/serial@2000"
 379
 380 #endif /* __CONFIG_H */