git.sur5r.net Git - u-boot/blob - include/configs/mx51evk.h

   1 /*
   2  * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
   3  *
   4  * (C) Copyright 2009 Freescale Semiconductor, Inc.
   5  *
   6  * Configuration settings for the MX51EVK Board
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14  /* High Level Configuration Options */
  15
  16 #define CONFIG_MX51     /* in a mx51 */
  17
  18 #define CONFIG_DISPLAY_BOARDINFO
  19
  20 #define CONFIG_SYS_FSL_CLK
  21 #define CONFIG_SYS_TEXT_BASE    0x97800000
  22
  23 #include <asm/arch/imx-regs.h>
  24
  25 #define CONFIG_CMDLINE_TAG                      /* enable passing of ATAGs */
  26 #define CONFIG_SETUP_MEMORY_TAGS
  27 #define CONFIG_INITRD_TAG
  28 #define CONFIG_REVISION_TAG
  29
  30 #define CONFIG_MACH_TYPE        MACH_TYPE_MX51_BABBAGE
  31 /*
  32  * Size of malloc() pool
  33  */
  34 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  35
  36 #define CONFIG_BOARD_LATE_INIT
  37
  38 /*
  39  * Hardware drivers
  40  */
  41 #define CONFIG_FSL_IIM
  42 #define CONFIG_CMD_FUSE
  43
  44 #define CONFIG_MXC_UART
  45 #define CONFIG_MXC_UART_BASE    UART1_BASE
  46 #define CONFIG_MXC_GPIO
  47
  48 /*
  49  * SPI Configs
  50  * */
  51
  52 #define CONFIG_MXC_SPI
  53
  54 /* PMIC Controller */
  55 #define CONFIG_POWER
  56 #define CONFIG_POWER_SPI
  57 #define CONFIG_POWER_FSL
  58 #define CONFIG_FSL_PMIC_BUS     0
  59 #define CONFIG_FSL_PMIC_CS      0
  60 #define CONFIG_FSL_PMIC_CLK     2500000
  61 #define CONFIG_FSL_PMIC_MODE    (SPI_MODE_0 | SPI_CS_HIGH)
  62 #define CONFIG_FSL_PMIC_BITLEN  32
  63 #define CONFIG_RTC_MC13XXX
  64
  65 /*
  66  * MMC Configs
  67  * */
  68 #define CONFIG_FSL_ESDHC
  69 #define CONFIG_SYS_FSL_ESDHC_ADDR       MMC_SDHC1_BASE_ADDR
  70 #define CONFIG_SYS_FSL_ESDHC_NUM        2
  71
  72 #define CONFIG_MMC
  73
  74 #define CONFIG_GENERIC_MMC
  75 #define CONFIG_DOS_PARTITION
  76
  77 /*
  78  * Eth Configs
  79  */
  80 #define CONFIG_MII
  81
  82 #define CONFIG_FEC_MXC
  83 #define IMX_FEC_BASE    FEC_BASE_ADDR
  84 #define CONFIG_FEC_MXC_PHYADDR  0x1F
  85
  86 /* USB Configs */
  87 #define CONFIG_USB_EHCI
  88 #define CONFIG_USB_EHCI_MX5
  89 #define CONFIG_USB_HOST_ETHER
  90 #define CONFIG_USB_ETHER_ASIX
  91 #define CONFIG_USB_ETHER_SMSC95XX
  92 #define CONFIG_MXC_USB_PORT     1
  93 #define CONFIG_MXC_USB_PORTSC   PORT_PTS_ULPI
  94 #define CONFIG_MXC_USB_FLAGS    MXC_EHCI_POWER_PINS_ENABLED
  95
  96 /* Framebuffer and LCD */
  97 #define CONFIG_PREBOOT
  98 #define CONFIG_VIDEO
  99 #define CONFIG_VIDEO_IPUV3
 100 #define CONFIG_CFB_CONSOLE
 101 #define CONFIG_VGA_AS_SINGLE_DEVICE
 102 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 103 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 104 #define CONFIG_VIDEO_BMP_RLE8
 105 #define CONFIG_SPLASH_SCREEN
 106 #define CONFIG_BMP_16BPP
 107 #define CONFIG_VIDEO_LOGO
 108 #define CONFIG_IPUV3_CLK        133000000
 109
 110 /* allow to overwrite serial and ethaddr */
 111 #define CONFIG_ENV_OVERWRITE
 112 #define CONFIG_CONS_INDEX               1
 113 #define CONFIG_BAUDRATE                 115200
 114
 115 /***********************************************************
 116  * Command definition
 117  ***********************************************************/
 118
 119 #define CONFIG_CMD_DATE
 120
 121
 122 #define CONFIG_ETHPRIME         "FEC0"
 123
 124 #define CONFIG_LOADADDR         0x92000000      /* loadaddr env var */
 125
 126 #define CONFIG_EXTRA_ENV_SETTINGS \
 127         "script=boot.scr\0" \
 128         "image=zImage\0" \
 129         "fdt_file=imx51-babbage.dtb\0" \
 130         "fdt_addr=0x91000000\0" \
 131         "boot_fdt=try\0" \
 132         "ip_dyn=yes\0" \
 133         "mmcdev=0\0" \
 134         "mmcpart=1\0" \
 135         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 136         "mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \
 137                 "root=${mmcroot}\0" \
 138         "loadbootscript=" \
 139                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 140         "bootscript=echo Running bootscript from mmc ...; " \
 141                 "source\0" \
 142         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 143         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 144         "mmcboot=echo Booting from mmc ...; " \
 145                 "run mmcargs; " \
 146                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 147                         "if run loadfdt; then " \
 148                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 149                         "else " \
 150                                 "if test ${boot_fdt} = try; then " \
 151                                         "bootz; " \
 152                                 "else " \
 153                                         "echo WARN: Cannot load the DT; " \
 154                                 "fi; " \
 155                         "fi; " \
 156                 "else " \
 157                         "bootz; " \
 158                 "fi;\0" \
 159         "netargs=setenv bootargs console=ttymxc0,${baudrate} " \
 160                 "root=/dev/nfs " \
 161                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 162         "netboot=echo Booting from net ...; " \
 163                 "run netargs; " \
 164                 "if test ${ip_dyn} = yes; then " \
 165                         "setenv get_cmd dhcp; " \
 166                 "else " \
 167                         "setenv get_cmd tftp; " \
 168                 "fi; " \
 169                 "${get_cmd} ${image}; " \
 170                 "if test ${boot_fdt} = yes ||  test ${boot_fdt} = try; then " \
 171                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 172                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 173                         "else " \
 174                                 "if test ${boot_fdt} = try; then " \
 175                                         "bootz; " \
 176                                 "else " \
 177                                         "echo ERROR: Cannot load the DT; " \
 178                                         "exit; " \
 179                                 "fi; " \
 180                         "fi; " \
 181                 "else " \
 182                         "bootz; " \
 183                 "fi;\0"
 184
 185 #define CONFIG_BOOTCOMMAND \
 186         "mmc dev ${mmcdev}; if mmc rescan; then " \
 187                 "if run loadbootscript; then " \
 188                         "run bootscript; " \
 189                 "else " \
 190                         "if run loadimage; then " \
 191                                 "run mmcboot; " \
 192                         "else run netboot; " \
 193                         "fi; " \
 194                 "fi; " \
 195         "else run netboot; fi"
 196
 197 #define CONFIG_ARP_TIMEOUT      200UL
 198
 199 /*
 200  * Miscellaneous configurable options
 201  */
 202 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 203 #define CONFIG_AUTO_COMPLETE
 204 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 205 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 206 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 207
 208 #define CONFIG_SYS_MEMTEST_START       0x90000000
 209 #define CONFIG_SYS_MEMTEST_END         0x90010000
 210
 211 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 212
 213 #define CONFIG_CMDLINE_EDITING
 214
 215 /*-----------------------------------------------------------------------
 216  * Physical Memory Map
 217  */
 218 #define CONFIG_NR_DRAM_BANKS    1
 219 #define PHYS_SDRAM_1            CSD0_BASE_ADDR
 220 #define PHYS_SDRAM_1_SIZE       (512 * 1024 * 1024)
 221
 222 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
 223 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
 224 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
 225
 226 #define CONFIG_BOARD_EARLY_INIT_F
 227
 228 #define CONFIG_SYS_INIT_SP_OFFSET \
 229         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 230 #define CONFIG_SYS_INIT_SP_ADDR \
 231         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 232
 233 #define CONFIG_SYS_DDR_CLKSEL   0
 234 #define CONFIG_SYS_CLKTL_CBCDR  0x59E35100
 235 #define CONFIG_SYS_MAIN_PWR_ON
 236
 237 /*-----------------------------------------------------------------------
 238  * FLASH and environment organization
 239  */
 240 #define CONFIG_SYS_NO_FLASH
 241
 242 #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
 243 #define CONFIG_ENV_SIZE        (8 * 1024)
 244 #define CONFIG_ENV_IS_IN_MMC
 245 #define CONFIG_SYS_MMC_ENV_DEV 0
 246
 247 #endif