]> git.sur5r.net Git - u-boot/blob - include/configs/mx53loco.h
spi: zynqmp_gqspi: Add support for ZynqMP qspi driver
[u-boot] / include / configs / mx53loco.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2011 Freescale Semiconductor, Inc.
4  * Jason Liu <r64343@freescale.com>
5  *
6  * Configuration settings for Freescale MX53 low cost board.
7  */
8
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11
12 #define CONFIG_MACH_TYPE        MACH_TYPE_MX53_LOCO
13
14 #include <asm/arch/imx-regs.h>
15
16 #define CONFIG_CMDLINE_TAG
17 #define CONFIG_SETUP_MEMORY_TAGS
18 #define CONFIG_INITRD_TAG
19
20 #define CONFIG_SYS_FSL_CLK
21
22 /* Size of malloc() pool */
23 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
24
25 #define CONFIG_REVISION_TAG
26
27 #define CONFIG_MXC_UART
28 #define CONFIG_MXC_UART_BASE    UART1_BASE
29
30 /* MMC Configs */
31 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
32 #define CONFIG_SYS_FSL_ESDHC_NUM        2
33
34 /* Eth Configs */
35 #define CONFIG_MII
36
37 #define CONFIG_FEC_MXC
38 #define IMX_FEC_BASE    FEC_BASE_ADDR
39 #define CONFIG_FEC_MXC_PHYADDR  0x1F
40
41 /* USB Configs */
42 #define CONFIG_USB_EHCI_MX5
43 #define CONFIG_MXC_USB_PORT     1
44 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
45 #define CONFIG_MXC_USB_FLAGS    0
46
47 /* I2C Configs */
48 #define CONFIG_SYS_I2C
49 #define CONFIG_SYS_I2C_MXC
50 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
51 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
52 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
53
54 /* PMIC Controller */
55 #define CONFIG_POWER
56 #define CONFIG_POWER_I2C
57 #define CONFIG_DIALOG_POWER
58 #define CONFIG_POWER_FSL
59 #define CONFIG_POWER_FSL_MC13892
60 #define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48
61 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR    0x8
62
63 /* allow to overwrite serial and ethaddr */
64 #define CONFIG_ENV_OVERWRITE
65
66 /* Command definition */
67
68
69 #define CONFIG_ETHPRIME         "FEC0"
70
71 #define CONFIG_LOADADDR         0x72000000      /* loadaddr env var */
72
73 #define CONFIG_EXTRA_ENV_SETTINGS \
74         "script=boot.scr\0" \
75         "image=zImage\0" \
76         "fdt_addr=0x71000000\0" \
77         "boot_fdt=try\0" \
78         "ip_dyn=yes\0" \
79         "mmcdev=0\0" \
80         "mmcpart=1\0" \
81         "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
82         "mmcargs=setenv bootargs console=ttymxc0,${baudrate} root=${mmcroot}\0" \
83         "loadbootscript=" \
84                 "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
85         "bootscript=echo Running bootscript from mmc ...; " \
86                 "source\0" \
87         "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
88         "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
89         "mmcboot=echo Booting from mmc ...; " \
90                 "run mmcargs; " \
91                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
92                         "if run loadfdt; then " \
93                                 "bootz ${loadaddr} - ${fdt_addr}; " \
94                         "else " \
95                                 "if test ${boot_fdt} = try; then " \
96                                         "bootz; " \
97                                 "else " \
98                                         "echo WARN: Cannot load the DT; " \
99                                 "fi; " \
100                         "fi; " \
101                 "else " \
102                         "bootz; " \
103                 "fi;\0" \
104         "netargs=setenv bootargs console=ttymxc0,${baudrate} " \
105                 "root=/dev/nfs " \
106                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
107         "netboot=echo Booting from net ...; " \
108                 "run netargs; " \
109                 "if test ${ip_dyn} = yes; then " \
110                         "setenv get_cmd dhcp; " \
111                 "else " \
112                         "setenv get_cmd tftp; " \
113                 "fi; " \
114                 "${get_cmd} ${image}; " \
115                 "if test ${boot_fdt} = yes ||  test ${boot_fdt} = try; then " \
116                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
117                                 "bootz ${loadaddr} - ${fdt_addr}; " \
118                         "else " \
119                                 "if test ${boot_fdt} = try; then " \
120                                         "bootz; " \
121                                 "else " \
122                                         "echo ERROR: Cannot load the DT; " \
123                                         "exit; " \
124                                 "fi; " \
125                         "fi; " \
126                 "else " \
127                         "bootz; " \
128                 "fi;\0"
129
130 #define CONFIG_BOOTCOMMAND \
131         "mmc dev ${mmcdev}; if mmc rescan; then " \
132                 "if run loadbootscript; then " \
133                         "run bootscript; " \
134                 "else " \
135                         "if run loadimage; then " \
136                                 "run mmcboot; " \
137                         "else run netboot; " \
138                         "fi; " \
139                 "fi; " \
140         "else run netboot; fi"
141
142 #define CONFIG_ARP_TIMEOUT      200UL
143
144 /* Miscellaneous configurable options */
145 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
146
147 #define CONFIG_SYS_MEMTEST_START       0x70000000
148 #define CONFIG_SYS_MEMTEST_END         0x70010000
149
150 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
151
152 /* Physical Memory Map */
153 #define CONFIG_NR_DRAM_BANKS    2
154 #define PHYS_SDRAM_1                    CSD0_BASE_ADDR
155 #define PHYS_SDRAM_1_SIZE               (gd->bd->bi_dram[0].size)
156 #define PHYS_SDRAM_2                    CSD1_BASE_ADDR
157 #define PHYS_SDRAM_2_SIZE               (gd->bd->bi_dram[1].size)
158 #define PHYS_SDRAM_SIZE                 (gd->ram_size)
159
160 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
161 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
162 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
163
164 #define CONFIG_SYS_INIT_SP_OFFSET \
165         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
166 #define CONFIG_SYS_INIT_SP_ADDR \
167         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
168
169 /* environment organization */
170 #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
171 #define CONFIG_ENV_SIZE        (8 * 1024)
172 #define CONFIG_SYS_MMC_ENV_DEV 0
173
174 #ifdef CONFIG_CMD_SATA
175         #define CONFIG_SYS_SATA_MAX_DEVICE      1
176         #define CONFIG_DWC_AHSATA_PORT_ID       0
177         #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_BASE_ADDR
178         #define CONFIG_LBA48
179 #endif
180
181 /* Framebuffer and LCD */
182 #define CONFIG_PREBOOT
183 #define CONFIG_VIDEO_IPUV3
184 #define CONFIG_VIDEO_BMP_RLE8
185 #define CONFIG_SPLASH_SCREEN
186 #define CONFIG_BMP_16BPP
187 #define CONFIG_VIDEO_LOGO
188
189 #endif                          /* __CONFIG_H */