git.sur5r.net Git - u-boot/blob - include/configs/mx53loco.h

   1 /*
   2  * Copyright (C) 2011 Freescale Semiconductor, Inc.
   3  * Jason Liu <r64343@freescale.com>
   4  *
   5  * Configuration settings for Freescale MX53 low cost board.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 #ifndef __CONFIG_H
  24 #define __CONFIG_H
  25
  26 #define CONFIG_MX53
  27
  28 #define CONFIG_DISPLAY_BOARDINFO
  29
  30 #define CONFIG_MACH_TYPE        MACH_TYPE_MX53_LOCO
  31
  32 #include <asm/arch/imx-regs.h>
  33
  34 #define CONFIG_CMDLINE_TAG
  35 #define CONFIG_SETUP_MEMORY_TAGS
  36 #define CONFIG_INITRD_TAG
  37
  38 /* Size of malloc() pool */
  39 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  40
  41 #define CONFIG_BOARD_EARLY_INIT_F
  42 #define CONFIG_BOARD_LATE_INIT
  43 #define CONFIG_MXC_GPIO
  44 #define CONFIG_REVISION_TAG
  45
  46 #define CONFIG_MXC_UART
  47 #define CONFIG_MXC_UART_BASE    UART1_BASE
  48
  49 /* MMC Configs */
  50 #define CONFIG_FSL_ESDHC
  51 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  52 #define CONFIG_SYS_FSL_ESDHC_NUM        2
  53
  54 #define CONFIG_MMC
  55 #define CONFIG_CMD_MMC
  56 #define CONFIG_GENERIC_MMC
  57 #define CONFIG_CMD_FAT
  58 #define CONFIG_CMD_EXT2
  59 #define CONFIG_DOS_PARTITION
  60
  61 /* Eth Configs */
  62 #define CONFIG_MII
  63
  64 #define CONFIG_FEC_MXC
  65 #define IMX_FEC_BASE    FEC_BASE_ADDR
  66 #define CONFIG_FEC_MXC_PHYADDR  0x1F
  67
  68 #define CONFIG_CMD_PING
  69 #define CONFIG_CMD_DHCP
  70 #define CONFIG_CMD_MII
  71 #define CONFIG_CMD_NET
  72
  73 /* USB Configs */
  74 #define CONFIG_CMD_USB
  75 #define CONFIG_CMD_FAT
  76 #define CONFIG_USB_EHCI
  77 #define CONFIG_USB_EHCI_MX5
  78 #define CONFIG_USB_STORAGE
  79 #define CONFIG_USB_HOST_ETHER
  80 #define CONFIG_USB_ETHER_ASIX
  81 #define CONFIG_USB_ETHER_SMSC95XX
  82 #define CONFIG_MXC_USB_PORT     1
  83 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  84 #define CONFIG_MXC_USB_FLAGS    0
  85
  86 /* I2C Configs */
  87 #define CONFIG_HARD_I2C
  88 #define CONFIG_I2C_MXC
  89 #define CONFIG_SYS_I2C_BASE             I2C1_BASE_ADDR
  90 #define CONFIG_SYS_I2C_SPEED            100000
  91
  92 /* PMIC Controller */
  93 #define CONFIG_POWER
  94 #define CONFIG_POWER_I2C
  95 #define CONFIG_DIALOG_POWER
  96 #define CONFIG_POWER_FSL
  97 #define CONFIG_PMIC_FSL_MC13892
  98 #define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48
  99 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR    0x8
 100
 101 /* allow to overwrite serial and ethaddr */
 102 #define CONFIG_ENV_OVERWRITE
 103 #define CONFIG_CONS_INDEX               1
 104 #define CONFIG_BAUDRATE                 115200
 105
 106 /* Command definition */
 107 #include <config_cmd_default.h>
 108 #define CONFIG_CMD_BOOTZ
 109
 110 #undef CONFIG_CMD_IMLS
 111
 112 #define CONFIG_BOOTDELAY        1
 113
 114 #define CONFIG_ETHPRIME         "FEC0"
 115
 116 #define CONFIG_LOADADDR         0x72000000      /* loadaddr env var */
 117 #define CONFIG_SYS_TEXT_BASE    0x77800000
 118
 119 #define CONFIG_EXTRA_ENV_SETTINGS \
 120         "script=boot.scr\0" \
 121         "uimage=uImage\0" \
 122         "fdt_file=imx53-qsb.dtb\0" \
 123         "fdt_addr=0x71000000\0" \
 124         "boot_fdt=try\0" \
 125         "ip_dyn=yes\0" \
 126         "mmcdev=0\0" \
 127         "mmcpart=2\0" \
 128         "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
 129         "mmcargs=setenv bootargs console=ttymxc0,${baudrate} root=${mmcroot}\0" \
 130         "loadbootscript=" \
 131                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 132         "bootscript=echo Running bootscript from mmc ...; " \
 133                 "source\0" \
 134         "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
 135         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 136         "mmcboot=echo Booting from mmc ...; " \
 137                 "run mmcargs; " \
 138                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 139                         "if run loadfdt; then " \
 140                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 141                         "else " \
 142                                 "if test ${boot_fdt} = try; then " \
 143                                         "bootm; " \
 144                                 "else " \
 145                                         "echo WARN: Cannot load the DT; " \
 146                                 "fi; " \
 147                         "fi; " \
 148                 "else " \
 149                         "bootm; " \
 150                 "fi;\0" \
 151         "netargs=setenv bootargs console=ttymxc0,${baudrate} " \
 152                 "root=/dev/nfs " \
 153                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 154         "netboot=echo Booting from net ...; " \
 155                 "run netargs; " \
 156                 "if test ${ip_dyn} = yes; then " \
 157                         "setenv get_cmd dhcp; " \
 158                 "else " \
 159                         "setenv get_cmd tftp; " \
 160                 "fi; " \
 161                 "${get_cmd} ${uimage}; " \
 162                 "if test ${boot_fdt} = yes ||  test ${boot_fdt} = try; then " \
 163                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 164                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 165                         "else " \
 166                                 "if test ${boot_fdt} = try; then " \
 167                                         "bootm; " \
 168                                 "else " \
 169                                         "echo ERROR: Cannot load the DT; " \
 170                                         "exit; " \
 171                                 "fi; " \
 172                         "fi; " \
 173                 "else " \
 174                         "bootm; " \
 175                 "fi;\0"
 176
 177 #define CONFIG_BOOTCOMMAND \
 178         "mmc dev ${mmcdev}; if mmc rescan; then " \
 179                 "if run loadbootscript; then " \
 180                         "run bootscript; " \
 181                 "else " \
 182                         "if run loaduimage; then " \
 183                                 "run mmcboot; " \
 184                         "else run netboot; " \
 185                         "fi; " \
 186                 "fi; " \
 187         "else run netboot; fi"
 188
 189 #define CONFIG_ARP_TIMEOUT      200UL
 190
 191 /* Miscellaneous configurable options */
 192 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 193 #define CONFIG_SYS_HUSH_PARSER          /* use "hush" command parser */
 194 #define CONFIG_SYS_PROMPT               "MX53LOCO U-Boot > "
 195 #define CONFIG_AUTO_COMPLETE
 196 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 197
 198 /* Print Buffer Size */
 199 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 200 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 201 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 202
 203 #define CONFIG_SYS_MEMTEST_START       0x70000000
 204 #define CONFIG_SYS_MEMTEST_END         0x70010000
 205
 206 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 207
 208 #define CONFIG_SYS_HZ           1000
 209 #define CONFIG_CMDLINE_EDITING
 210
 211 /* Physical Memory Map */
 212 #define CONFIG_NR_DRAM_BANKS    2
 213 #define PHYS_SDRAM_1            CSD0_BASE_ADDR
 214 #define PHYS_SDRAM_1_SIZE       (512 * 1024 * 1024)
 215 #define PHYS_SDRAM_2            CSD1_BASE_ADDR
 216 #define PHYS_SDRAM_2_SIZE       (512 * 1024 * 1024)
 217 #define PHYS_SDRAM_SIZE         (PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE)
 218
 219 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
 220 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
 221 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
 222
 223 #define CONFIG_SYS_INIT_SP_OFFSET \
 224         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 225 #define CONFIG_SYS_INIT_SP_ADDR \
 226         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 227
 228 /* FLASH and environment organization */
 229 #define CONFIG_SYS_NO_FLASH
 230
 231 #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
 232 #define CONFIG_ENV_SIZE        (8 * 1024)
 233 #define CONFIG_ENV_IS_IN_MMC
 234 #define CONFIG_SYS_MMC_ENV_DEV 0
 235
 236 #define CONFIG_OF_LIBFDT
 237
 238 #define CONFIG_CMD_SATA
 239 #ifdef CONFIG_CMD_SATA
 240         #define CONFIG_DWC_AHSATA
 241         #define CONFIG_SYS_SATA_MAX_DEVICE      1
 242         #define CONFIG_DWC_AHSATA_PORT_ID       0
 243         #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_BASE_ADDR
 244         #define CONFIG_LBA48
 245         #define CONFIG_LIBATA
 246 #endif
 247
 248 /* Framebuffer and LCD */
 249 #define CONFIG_PREBOOT
 250 #define CONFIG_VIDEO
 251 #define CONFIG_VIDEO_IPUV3
 252 #define CONFIG_CFB_CONSOLE
 253 #define CONFIG_VGA_AS_SINGLE_DEVICE
 254 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 255 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 256 #define CONFIG_VIDEO_BMP_RLE8
 257 #define CONFIG_SPLASH_SCREEN
 258 #define CONFIG_BMP_16BPP
 259 #define CONFIG_VIDEO_LOGO
 260 #define CONFIG_IPUV3_CLK        200000000
 261
 262 #endif                          /* __CONFIG_H */