2 * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
4 * See file CREDITS for list of people who contributed to this
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
18 #ifndef _CONFIG_NETSPACE_V2_H
19 #define _CONFIG_NETSPACE_V2_H
22 * Machine number definition
24 #if defined(CONFIG_INETSPACE_V2)
25 #define CONFIG_MACH_TYPE MACH_TYPE_INETSPACE_V2
26 #define CONFIG_IDENT_STRING " IS v2"
27 #elif defined(CONFIG_NETSPACE_V2)
28 #define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_V2
29 #define CONFIG_IDENT_STRING " NS v2"
30 #elif defined(CONFIG_NETSPACE_MAX_V2)
31 #define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_MAX_V2
32 #define CONFIG_IDENT_STRING " NS Max v2"
34 #error "Unknown board"
38 * High Level Configuration Options (easy to change)
40 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
41 #define CONFIG_KIRKWOOD /* SOC Family Name */
42 #define CONFIG_KW88F6281 /* SOC Name */
43 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
46 * Commands configuration
48 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
49 #include <config_cmd_default.h>
50 #define CONFIG_CMD_ENV
51 #define CONFIG_CMD_DHCP
52 #define CONFIG_CMD_PING
54 #define CONFIG_CMD_I2C
55 #define CONFIG_CMD_IDE
56 #define CONFIG_CMD_USB
59 * Core clock definition.
61 #define CONFIG_SYS_TCLK 166000000 /* 166MHz */
63 #define CONFIG_NR_DRAM_BANKS 1
64 #ifdef CONFIG_INETSPACE_V2
65 /* Different SDRAM configuration and size for Internet Space v2 */
66 #define CONFIG_SYS_KWD_CONFIG ($(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-is2.cfg)
70 * mv-common.h should be defined after CMD configs since it used them
71 * to enable certain macros
73 #include "mv-common.h"
75 /* Remove or override few declarations from mv-common.h */
77 #undef CONFIG_ENV_SPI_MAX_HZ
78 #undef CONFIG_SYS_IDE_MAXBUS
79 #undef CONFIG_SYS_IDE_MAXDEVICE
80 #undef CONFIG_SYS_PROMPT
81 #define CONFIG_ENV_SPI_MAX_HZ 20000000 /* 20Mhz */
82 #define CONFIG_SYS_IDE_MAXBUS 1
83 #define CONFIG_SYS_IDE_MAXDEVICE 1
84 #define CONFIG_SYS_PROMPT "ns2> "
87 * Ethernet Driver configuration
90 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
91 #define CONFIG_NETCONSOLE
95 * SATA Driver configuration
97 #ifdef CONFIG_MVSATA_IDE
98 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
99 /* Network Space Max v2 use 2 SATA ports */
100 #ifdef CONFIG_NETSPACE_MAX_V2
101 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
106 * Enable GPI0 support
108 #define CONFIG_KIRKWOOD_GPIO
113 #ifdef CONFIG_CMD_I2C
114 /* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */
115 #define CONFIG_CMD_EEPROM
116 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
117 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16-byte page size */
118 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit device address */
119 #endif /* CONFIG_CMD_I2C */
122 * File systems support
124 #define CONFIG_CMD_EXT2
125 #define CONFIG_CMD_FAT
128 * Use the HUSH parser
130 #define CONFIG_SYS_HUSH_PARSER
131 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
134 * Console configuration
136 #define CONFIG_CONSOLE_MUX
137 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
140 * Enable device tree support
142 #define CONFIG_OF_LIBFDT
145 * Environment variables configurations
147 #define CONFIG_ENV_IS_IN_SPI_FLASH
148 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64KB */
149 #define CONFIG_ENV_SIZE 0x1000 /* 4KB */
150 #define CONFIG_ENV_ADDR 0x70000
151 #define CONFIG_ENV_OFFSET 0x70000 /* env starts here */
154 * Default environment variables
156 #define CONFIG_BOOTARGS "console=ttyS0,115200"
158 #define CONFIG_BOOTCOMMAND \
159 "dhcp && run netconsole; " \
160 "if run usbload || run diskload; then bootm; fi"
162 #define CONFIG_EXTRA_ENV_SETTINGS \
166 "bootfile=uImage\0" \
167 "loadaddr=0x800000\0" \
170 "set stdin $stdin,nc; " \
171 "set stdout $stdout,nc; " \
172 "set stderr $stderr,nc;\0" \
173 "diskload=ide reset && " \
174 "ext2load ide 0:1 $loadaddr /boot/$bootfile\0" \
175 "usbload=usb start && " \
176 "fatload usb 0:1 $loadaddr /boot/$bootfile\0"
178 #endif /* _CONFIG_NETSPACE_V2_H */