git.sur5r.net Git - u-boot/blob - include/configs/nokia_rx51.h

   1 /*
   2  * (C) Copyright 2011-2012
   3  * Pali Rohár <pali.rohar@gmail.com>
   4  *
   5  * (C) Copyright 2010
   6  * Alistair Buxton <a.j.buxton@gmail.com>
   7  *
   8  * Derived from Beagle Board code:
   9  * (C) Copyright 2006-2008
  10  * Texas Instruments.
  11  * Richard Woodruff <r-woodruff2@ti.com>
  12  * Syed Mohammed Khasim <x0khasim@ti.com>
  13  *
  14  * Configuration settings for the Nokia RX-51 aka N900.
  15  *
  16  * SPDX-License-Identifier:     GPL-2.0+
  17  */
  18
  19 #ifndef __CONFIG_H
  20 #define __CONFIG_H
  21
  22 /*
  23  * High Level Configuration Options
  24  */
  25 #define CONFIG_SYS_L2CACHE_OFF          /* pretend there is no L2 CACHE */
  26
  27 #define CONFIG_MACH_TYPE                MACH_TYPE_NOKIA_RX51
  28
  29 /*
  30  * Nokia X-Loader loading secondary image to address 0x80400000
  31  * NOLO loading boot image to random place, so it doesn't really
  32  * matter what we set this to. We have to copy u-boot to this address
  33  */
  34 #define CONFIG_SYS_TEXT_BASE    0x80008000
  35
  36 #include <asm/arch/cpu.h>               /* get chip and board defs */
  37 #include <asm/arch/omap.h>
  38 #include <asm/arch/mem.h>
  39 #include <linux/stringify.h>
  40
  41 /* Clock Defines */
  42 #define V_OSCK                  26000000        /* Clock output from T2 */
  43 #define V_SCLK                  (V_OSCK >> 1)
  44
  45 #define CONFIG_MISC_INIT_R
  46 #define CONFIG_SKIP_LOWLEVEL_INIT               /* X-Loader set everything up */
  47
  48 #define CONFIG_CMDLINE_TAG      /* enable passing kernel command line string */
  49 #define CONFIG_INITRD_TAG                       /* enable passing initrd */
  50 #define CONFIG_REVISION_TAG                     /* enable passing revision tag*/
  51 #define CONFIG_SETUP_MEMORY_TAGS                /* enable memory tag */
  52
  53 /*
  54  * Size of malloc() pool
  55  */
  56 #define CONFIG_ENV_SIZE                 (128 << 10)
  57 #define CONFIG_UBI_SIZE                 (512 << 10)
  58 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \
  59                                         (128 << 10))
  60
  61 /*
  62  * Hardware drivers
  63  */
  64
  65 /*
  66  * NS16550 Configuration
  67  */
  68 #define V_NS16550_CLK           48000000                /* 48MHz (APLL96/2) */
  69
  70 #define CONFIG_SYS_NS16550_SERIAL
  71 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  72 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
  73
  74 /*
  75  * select serial console configuration
  76  */
  77 #define CONFIG_CONS_INDEX               3
  78 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
  79 #define CONFIG_SERIAL3                  3               /* UART3 on RX-51 */
  80
  81 /* allow to overwrite serial and ethaddr */
  82 #define CONFIG_ENV_OVERWRITE
  83 #define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }
  84
  85 /* USB device configuration */
  86 #define CONFIG_USB_DEVICE
  87 #define CONFIG_USBD_VENDORID            0x0421
  88 #define CONFIG_USBD_PRODUCTID           0x01c8
  89 #define CONFIG_USBD_MANUFACTURER        "Nokia"
  90 #define CONFIG_USBD_PRODUCT_NAME        "N900"
  91
  92 /* commands to include */
  93
  94 #define CONFIG_CMDLINE_EDITING          /* add command line history */
  95 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support */
  96
  97 #define CONFIG_SYS_I2C
  98 #define CONFIG_SYS_OMAP24_I2C_SPEED     100000
  99 #define CONFIG_SYS_OMAP24_I2C_SLAVE     1
 100
 101 /*
 102  * TWL4030
 103  */
 104 #define CONFIG_TWL4030_LED
 105 #define CONFIG_TWL4030_KEYPAD
 106
 107 #define GPIO_SLIDE                      71
 108
 109 /*
 110  * Board ONENAND Info.
 111  */
 112
 113 #define PART1_NAME                      "bootloader"
 114 #define PART1_SIZE                      128
 115 #define PART1_MULL                      1024
 116 #define PART1_SUFF                      "k"
 117 #define PART1_OFFS                      0x00000000
 118 #define PART1_MASK                      0x00000003
 119
 120 #define PART2_NAME                      "config"
 121 #define PART2_SIZE                      384
 122 #define PART2_MULL                      1024
 123 #define PART2_SUFF                      "k"
 124 #define PART2_OFFS                      0x00020000
 125 #define PART2_MASK                      0x00000000
 126
 127 #define PART3_NAME                      "log"
 128 #define PART3_SIZE                      256
 129 #define PART3_MULL                      1024
 130 #define PART3_SUFF                      "k"
 131 #define PART3_OFFS                      0x00080000
 132 #define PART3_MASK                      0x00000000
 133
 134 #define PART4_NAME                      "kernel"
 135 #define PART4_SIZE                      2
 136 #define PART4_MULL                      1024*1024
 137 #define PART4_SUFF                      "m"
 138 #define PART4_OFFS                      0x000c0000
 139 #define PART4_MASK                      0x00000000
 140
 141 #define PART5_NAME                      "initfs"
 142 #define PART5_SIZE                      2
 143 #define PART5_MULL                      1024*1024
 144 #define PART5_SUFF                      "m"
 145 #define PART5_OFFS                      0x002c0000
 146 #define PART5_MASK                      0x00000000
 147
 148 #define PART6_NAME                      "rootfs"
 149 #define PART6_SIZE                      257280
 150 #define PART6_MULL                      1024
 151 #define PART6_SUFF                      "k"
 152 #define PART6_OFFS                      0x004c0000
 153 #define PART6_MASK                      0x00000000
 154
 155 #ifdef ONENAND_SUPPORT
 156
 157 #define CONFIG_SYS_ONENAND_BASE         ONENAND_MAP
 158 #define CONFIG_MTD_DEVICE
 159 #define CONFIG_MTD_PARTITIONS
 160
 161 #endif
 162
 163 /* Watchdog support */
 164 #define CONFIG_HW_WATCHDOG
 165
 166 /*
 167  * Framebuffer
 168  */
 169 /* Video console */
 170 #define CONFIG_VIDEO_LOGO
 171 #define VIDEO_FB_16BPP_PIXEL_SWAP
 172 #define VIDEO_FB_16BPP_WORD_SWAP
 173 #define CONFIG_SPLASH_SCREEN
 174
 175 /* functions for cfb_console */
 176 #define VIDEO_KBD_INIT_FCT              rx51_kp_init()
 177 #define VIDEO_TSTC_FCT                  rx51_kp_tstc
 178 #define VIDEO_GETC_FCT                  rx51_kp_getc
 179 #ifndef __ASSEMBLY__
 180 struct stdio_dev;
 181 int rx51_kp_init(void);
 182 int rx51_kp_tstc(struct stdio_dev *sdev);
 183 int rx51_kp_getc(struct stdio_dev *sdev);
 184 #endif
 185
 186 /* Environment information */
 187 #ifdef CONFIG_MTDPARTS_DEFAULT
 188 #define MTDPARTS "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"
 189 #else
 190 #define MTDPARTS
 191 #endif
 192 #define CONFIG_EXTRA_ENV_SETTINGS \
 193         MTDPARTS \
 194         "usbtty=cdc_acm\0" \
 195         "stdin=vga\0" \
 196         "stdout=vga\0" \
 197         "stderr=vga\0" \
 198         "setcon=setenv stdin ${con};" \
 199                 "setenv stdout ${con};" \
 200                 "setenv stderr ${con}\0" \
 201         "sercon=setenv con serial; run setcon\0" \
 202         "usbcon=setenv con usbtty; run setcon\0" \
 203         "vgacon=setenv con vga; run setcon\0" \
 204         "slide=gpio input " __stringify(GPIO_SLIDE) "\0" \
 205         "switchmmc=mmc dev ${mmcnum}\0" \
 206         "kernaddr=0x82008000\0" \
 207         "initrdaddr=0x84008000\0" \
 208         "scriptaddr=0x86008000\0" \
 209         "fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \
 210                 "${loadaddr} ${mmcfile}\0" \
 211         "kernload=setenv loadaddr ${kernaddr};" \
 212                 "setenv mmcfile ${mmckernfile};" \
 213                 "run fileload\0" \
 214         "initrdload=setenv loadaddr ${initrdaddr};" \
 215                 "setenv mmcfile ${mmcinitrdfile};" \
 216                 "run fileload\0" \
 217         "scriptload=setenv loadaddr ${scriptaddr};" \
 218                 "setenv mmcfile ${mmcscriptfile};" \
 219                 "run fileload\0" \
 220         "scriptboot=echo Running ${mmcscriptfile} from mmc " \
 221                 "${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \
 222         "kernboot=echo Booting ${mmckernfile} from mmc " \
 223                 "${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \
 224         "kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\
 225                 "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \
 226         "attachboot=echo Booting attached kernel image ...;" \
 227                 "setenv setup_omap_atag 1;" \
 228                 "bootm ${attkernaddr};" \
 229                 "setenv setup_omap_atag\0" \
 230         "trymmcscriptboot=if run switchmmc; then " \
 231                         "if run scriptload; then " \
 232                                 "run scriptboot;" \
 233                         "fi;" \
 234                 "fi\0" \
 235         "trymmckernboot=if run switchmmc; then " \
 236                         "if run kernload; then " \
 237                                 "run kernboot;" \
 238                         "fi;" \
 239                 "fi\0" \
 240         "trymmckerninitrdboot=if run switchmmc; then " \
 241                         "if run initrdload; then " \
 242                                 "if run kernload; then " \
 243                                         "run kerninitrdboot;" \
 244                                 "fi;" \
 245                         "fi; " \
 246                 "fi\0" \
 247         "trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \
 248                 "setenv mmckernfile uImage; run trymmckernboot\0" \
 249         "trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \
 250                 "setenv mmcpart 2; run trymmcpartboot;" \
 251                 "setenv mmcpart 3; run trymmcpartboot;" \
 252                 "setenv mmcpart 4; run trymmcpartboot\0" \
 253         "trymmcboot=if run switchmmc; then " \
 254                         "setenv mmctype fat;" \
 255                         "run trymmcallpartboot;" \
 256                         "setenv mmctype ext2;" \
 257                         "run trymmcallpartboot;" \
 258                         "setenv mmctype ext4;" \
 259                         "run trymmcallpartboot;" \
 260                 "fi\0" \
 261         "emmcboot=setenv mmcnum 1; run trymmcboot\0" \
 262         "sdboot=setenv mmcnum 0; run trymmcboot\0" \
 263         "menucmd=bootmenu\0" \
 264         "bootmenu_0=Attached kernel=run attachboot\0" \
 265         "bootmenu_1=Internal eMMC=run emmcboot\0" \
 266         "bootmenu_2=External SD card=run sdboot\0" \
 267         "bootmenu_3=U-Boot boot order=boot\0" \
 268         "bootmenu_delay=30\0" \
 269         ""
 270
 271 #define CONFIG_PREBOOT \
 272         "setenv mmcnum 1; setenv mmcpart 1;" \
 273         "setenv mmcscriptfile bootmenu.scr;" \
 274         "if run switchmmc; then " \
 275                 "setenv mmcdone true;" \
 276                 "setenv mmctype fat;" \
 277                 "if run scriptload; then true; else " \
 278                         "setenv mmctype ext2;" \
 279                         "if run scriptload; then true; else " \
 280                                 "setenv mmctype ext4;" \
 281                                 "if run scriptload; then true; else " \
 282                                         "setenv mmcdone false;" \
 283                                 "fi;" \
 284                         "fi;" \
 285                 "fi;" \
 286                 "if ${mmcdone}; then " \
 287                         "run scriptboot;" \
 288                 "fi;" \
 289         "fi;" \
 290         "if run slide; then true; else " \
 291                 "setenv bootmenu_delay 0;" \
 292                 "setenv bootdelay 0;" \
 293         "fi"
 294
 295 #define CONFIG_POSTBOOTMENU \
 296         "echo;" \
 297         "echo Extra commands:;" \
 298         "echo run sercon - Use serial port for control.;" \
 299         "echo run usbcon - Use usbtty for control.;" \
 300         "echo run vgacon - Use framebuffer/keyboard.;" \
 301         "echo run sdboot - Boot from SD card slot.;" \
 302         "echo run emmcboot - Boot internal eMMC memory.;" \
 303         "echo run attachboot - Boot attached kernel image.;" \
 304         "echo"
 305
 306 #define CONFIG_BOOTCOMMAND \
 307         "run sdboot;" \
 308         "run emmcboot;" \
 309         "run attachboot;" \
 310         "echo"
 311
 312 #define CONFIG_MENU_SHOW
 313
 314 /*
 315  * Miscellaneous configurable options
 316  */
 317 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 318
 319 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)
 320 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/
 321
 322 /* default load address */
 323 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0)
 324
 325 /*
 326  * OMAP3 has 12 GP timers, they can be driven by the system clock
 327  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 328  * This rate is divided by a local divisor.
 329  */
 330 #define CONFIG_SYS_TIMERBASE            (OMAP34XX_GPT2)
 331 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
 332
 333 /*
 334  * Physical Memory Map
 335  */
 336 #define CONFIG_NR_DRAM_BANKS            2
 337 #define PHYS_SDRAM_1                    OMAP34XX_SDRC_CS0
 338
 339 /*
 340  * FLASH and environment organization
 341  */
 342
 343 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 344 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 345 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 346 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 347                         CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 348
 349 /*
 350  * Attached kernel image
 351  */
 352
 353 #define SDRAM_SIZE                      0x10000000      /* 256 MB */
 354 #define SDRAM_END                       (CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE)
 355
 356 #define IMAGE_MAXSIZE                   0x1FF800        /* 2 MB - 2 kB */
 357 #define KERNEL_OFFSET                   0x40000         /* 256 kB */
 358 #define KERNEL_MAXSIZE                  (IMAGE_MAXSIZE-KERNEL_OFFSET)
 359 #define KERNEL_ADDRESS                  (SDRAM_END-KERNEL_MAXSIZE)
 360
 361 /* Reserve protected RAM for attached kernel */
 362 #define CONFIG_PRAM                     ((KERNEL_MAXSIZE >> 10)+1)
 363
 364 #endif /* __CONFIG_H */