git.sur5r.net Git - u-boot/blob - include/configs/nokia_rx51.h

   1 /*
   2  * (C) Copyright 2011-2012
   3  * Pali Rohár <pali.rohar@gmail.com>
   4  *
   5  * (C) Copyright 2010
   6  * Alistair Buxton <a.j.buxton@gmail.com>
   7  *
   8  * Derived from Beagle Board code:
   9  * (C) Copyright 2006-2008
  10  * Texas Instruments.
  11  * Richard Woodruff <r-woodruff2@ti.com>
  12  * Syed Mohammed Khasim <x0khasim@ti.com>
  13  *
  14  * Configuration settings for the Nokia RX-51 aka N900.
  15  *
  16  * SPDX-License-Identifier:     GPL-2.0+
  17  */
  18
  19 #ifndef __CONFIG_H
  20 #define __CONFIG_H
  21
  22 /*
  23  * High Level Configuration Options
  24  */
  25
  26 #define CONFIG_OMAP                     /* in a TI OMAP core */
  27 #define CONFIG_OMAP3430                 /* which is in a 3430 */
  28 #define CONFIG_OMAP3_RX51               /* working with RX51 */
  29 #define CONFIG_SYS_L2CACHE_OFF          /* pretend there is no L2 CACHE */
  30 /* Common ARM Erratas */
  31 #define CONFIG_ARM_ERRATA_454179
  32 #define CONFIG_ARM_ERRATA_430973
  33 #define CONFIG_ARM_ERRATA_621766
  34
  35 #define CONFIG_MACH_TYPE                MACH_TYPE_NOKIA_RX51
  36
  37 /*
  38  * Nokia X-Loader loading secondary image to address 0x80400000
  39  * NOLO loading boot image to random place, so it doesn't really
  40  * matter what we set this to. We have to copy u-boot to this address
  41  */
  42 #define CONFIG_SYS_TEXT_BASE    0x80008000
  43
  44 #define CONFIG_SDRC                     /* The chip has SDRC controller */
  45
  46 #include <asm/arch/cpu.h>               /* get chip and board defs */
  47 #include <asm/arch/omap.h>
  48 #include <asm/arch/mem.h>
  49 #include <linux/stringify.h>
  50
  51 /* Clock Defines */
  52 #define V_OSCK                  26000000        /* Clock output from T2 */
  53 #define V_SCLK                  (V_OSCK >> 1)
  54
  55 #undef CONFIG_USE_IRQ                           /* no support for IRQs */
  56 #define CONFIG_MISC_INIT_R
  57 #define CONFIG_SKIP_LOWLEVEL_INIT               /* X-Loader set everything up */
  58
  59 #define CONFIG_CMDLINE_TAG      /* enable passing kernel command line string */
  60 #define CONFIG_INITRD_TAG                       /* enable passing initrd */
  61 #define CONFIG_REVISION_TAG                     /* enable passing revision tag*/
  62 #define CONFIG_SETUP_MEMORY_TAGS                /* enable memory tag */
  63
  64 /*
  65  * Size of malloc() pool
  66  */
  67 #define CONFIG_ENV_SIZE                 (128 << 10)
  68 #define CONFIG_UBI_SIZE                 (512 << 10)
  69 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \
  70                                         (128 << 10))
  71
  72 /*
  73  * Hardware drivers
  74  */
  75
  76 /*
  77  * NS16550 Configuration
  78  */
  79 #define V_NS16550_CLK           48000000                /* 48MHz (APLL96/2) */
  80
  81 #define CONFIG_SYS_NS16550_SERIAL
  82 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  83 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
  84
  85 /*
  86  * select serial console configuration
  87  */
  88 #define CONFIG_CONS_INDEX               3
  89 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
  90 #define CONFIG_SERIAL3                  3               /* UART3 on RX-51 */
  91
  92 /* allow to overwrite serial and ethaddr */
  93 #define CONFIG_ENV_OVERWRITE
  94 #define CONFIG_BAUDRATE                 115200
  95 #define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }
  96 #define CONFIG_MMC
  97 #define CONFIG_GENERIC_MMC
  98 #define CONFIG_OMAP_HSMMC
  99 #define CONFIG_DOS_PARTITION
 100
 101 /* USB */
 102 #define CONFIG_USB_MUSB_UDC
 103 #define CONFIG_USB_MUSB_HCD
 104 #define CONFIG_USB_OMAP3
 105 #define CONFIG_TWL4030_USB
 106
 107 /* USB device configuration */
 108 #define CONFIG_USB_DEVICE
 109 #define CONFIG_USBD_VENDORID            0x0421
 110 #define CONFIG_USBD_PRODUCTID           0x01c8
 111 #define CONFIG_USBD_MANUFACTURER        "Nokia"
 112 #define CONFIG_USBD_PRODUCT_NAME        "N900"
 113
 114 #define CONFIG_SYS_NO_FLASH
 115
 116 /* commands to include */
 117
 118 #define CONFIG_CMDLINE_EDITING          /* add command line history */
 119 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support */
 120
 121 #define CONFIG_CMD_BOOTMENU             /* ANSI terminal Boot Menu */
 122 #define CONFIG_CMD_CLEAR                /* ANSI terminal clear screen command */
 123
 124 #ifdef ONENAND_SUPPORT
 125
 126 #define CONFIG_CMD_ONENAND              /* ONENAND support */
 127 #define CONFIG_CMD_MTDPARTS             /* mtd parts support */
 128
 129 #ifdef UBIFS_SUPPORT
 130 #define CONFIG_CMD_UBIFS                /* UBIFS Support */
 131 #endif
 132
 133 #endif
 134
 135 #define CONFIG_OMAP3_SPI
 136 #define CONFIG_SYS_I2C
 137 #define CONFIG_SYS_OMAP24_I2C_SPEED     100000
 138 #define CONFIG_SYS_OMAP24_I2C_SLAVE     1
 139 #define CONFIG_SYS_I2C_OMAP34XX
 140
 141 /*
 142  * TWL4030
 143  */
 144 #define CONFIG_TWL4030_POWER
 145 #define CONFIG_TWL4030_LED
 146 #define CONFIG_TWL4030_KEYPAD
 147
 148 #define CONFIG_OMAP_GPIO
 149 #define GPIO_SLIDE                      71
 150
 151 /*
 152  * Board ONENAND Info.
 153  */
 154
 155 #define PART1_NAME                      "bootloader"
 156 #define PART1_SIZE                      128
 157 #define PART1_MULL                      1024
 158 #define PART1_SUFF                      "k"
 159 #define PART1_OFFS                      0x00000000
 160 #define PART1_MASK                      0x00000003
 161
 162 #define PART2_NAME                      "config"
 163 #define PART2_SIZE                      384
 164 #define PART2_MULL                      1024
 165 #define PART2_SUFF                      "k"
 166 #define PART2_OFFS                      0x00020000
 167 #define PART2_MASK                      0x00000000
 168
 169 #define PART3_NAME                      "log"
 170 #define PART3_SIZE                      256
 171 #define PART3_MULL                      1024
 172 #define PART3_SUFF                      "k"
 173 #define PART3_OFFS                      0x00080000
 174 #define PART3_MASK                      0x00000000
 175
 176 #define PART4_NAME                      "kernel"
 177 #define PART4_SIZE                      2
 178 #define PART4_MULL                      1024*1024
 179 #define PART4_SUFF                      "m"
 180 #define PART4_OFFS                      0x000c0000
 181 #define PART4_MASK                      0x00000000
 182
 183 #define PART5_NAME                      "initfs"
 184 #define PART5_SIZE                      2
 185 #define PART5_MULL                      1024*1024
 186 #define PART5_SUFF                      "m"
 187 #define PART5_OFFS                      0x002c0000
 188 #define PART5_MASK                      0x00000000
 189
 190 #define PART6_NAME                      "rootfs"
 191 #define PART6_SIZE                      257280
 192 #define PART6_MULL                      1024
 193 #define PART6_SUFF                      "k"
 194 #define PART6_OFFS                      0x004c0000
 195 #define PART6_MASK                      0x00000000
 196
 197 #ifdef ONENAND_SUPPORT
 198
 199 #define CONFIG_SYS_ONENAND_BASE         ONENAND_MAP
 200 #define CONFIG_MTD_DEVICE
 201 #define CONFIG_MTD_PARTITIONS
 202
 203 #ifdef UBIFS_SUPPORT
 204 #define CONFIG_RBTREE
 205 #define CONFIG_LZO
 206 #endif
 207
 208 #define MTDIDS_DEFAULT                  "onenand0=onenand"
 209 #define MTDPARTS_DEFAULT                "mtdparts=onenand:" \
 210                 __stringify(PART1_SIZE) PART1_SUFF "(" PART1_NAME ")ro," \
 211                 __stringify(PART2_SIZE) PART2_SUFF "(" PART2_NAME ")," \
 212                 __stringify(PART3_SIZE) PART3_SUFF "(" PART3_NAME ")," \
 213                 __stringify(PART4_SIZE) PART4_SUFF "(" PART4_NAME ")," \
 214                 __stringify(PART5_SIZE) PART5_SUFF "(" PART5_NAME ")," \
 215                 "-(" PART6_NAME ")"
 216
 217 #endif
 218
 219 /* Watchdog support */
 220 #define CONFIG_HW_WATCHDOG
 221
 222 /*
 223  * Framebuffer
 224  */
 225 /* Video console */
 226 #define CONFIG_VIDEO_LOGO
 227 #define VIDEO_FB_16BPP_PIXEL_SWAP
 228 #define VIDEO_FB_16BPP_WORD_SWAP
 229 #define CONFIG_SPLASH_SCREEN
 230
 231 /* functions for cfb_console */
 232 #define VIDEO_KBD_INIT_FCT              rx51_kp_init()
 233 #define VIDEO_TSTC_FCT                  rx51_kp_tstc
 234 #define VIDEO_GETC_FCT                  rx51_kp_getc
 235 #ifndef __ASSEMBLY__
 236 struct stdio_dev;
 237 int rx51_kp_init(void);
 238 int rx51_kp_tstc(struct stdio_dev *sdev);
 239 int rx51_kp_getc(struct stdio_dev *sdev);
 240 #endif
 241
 242 #ifndef MTDPARTS_DEFAULT
 243 #define MTDPARTS_DEFAULT
 244 #endif
 245
 246 /* Environment information */
 247 #define CONFIG_EXTRA_ENV_SETTINGS \
 248         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 249         "usbtty=cdc_acm\0" \
 250         "stdin=vga\0" \
 251         "stdout=vga\0" \
 252         "stderr=vga\0" \
 253         "setcon=setenv stdin ${con};" \
 254                 "setenv stdout ${con};" \
 255                 "setenv stderr ${con}\0" \
 256         "sercon=setenv con serial; run setcon\0" \
 257         "usbcon=setenv con usbtty; run setcon\0" \
 258         "vgacon=setenv con vga; run setcon\0" \
 259         "slide=gpio input " __stringify(GPIO_SLIDE) "\0" \
 260         "switchmmc=mmc dev ${mmcnum}\0" \
 261         "kernaddr=0x82008000\0" \
 262         "initrdaddr=0x84008000\0" \
 263         "scriptaddr=0x86008000\0" \
 264         "fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \
 265                 "${loadaddr} ${mmcfile}\0" \
 266         "kernload=setenv loadaddr ${kernaddr};" \
 267                 "setenv mmcfile ${mmckernfile};" \
 268                 "run fileload\0" \
 269         "initrdload=setenv loadaddr ${initrdaddr};" \
 270                 "setenv mmcfile ${mmcinitrdfile};" \
 271                 "run fileload\0" \
 272         "scriptload=setenv loadaddr ${scriptaddr};" \
 273                 "setenv mmcfile ${mmcscriptfile};" \
 274                 "run fileload\0" \
 275         "scriptboot=echo Running ${mmcscriptfile} from mmc " \
 276                 "${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \
 277         "kernboot=echo Booting ${mmckernfile} from mmc " \
 278                 "${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \
 279         "kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\
 280                 "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \
 281         "attachboot=echo Booting attached kernel image ...;" \
 282                 "setenv setup_omap_atag 1;" \
 283                 "bootm ${attkernaddr};" \
 284                 "setenv setup_omap_atag\0" \
 285         "trymmcscriptboot=if run switchmmc; then " \
 286                         "if run scriptload; then " \
 287                                 "run scriptboot;" \
 288                         "fi;" \
 289                 "fi\0" \
 290         "trymmckernboot=if run switchmmc; then " \
 291                         "if run kernload; then " \
 292                                 "run kernboot;" \
 293                         "fi;" \
 294                 "fi\0" \
 295         "trymmckerninitrdboot=if run switchmmc; then " \
 296                         "if run initrdload; then " \
 297                                 "if run kernload; then " \
 298                                         "run kerninitrdboot;" \
 299                                 "fi;" \
 300                         "fi; " \
 301                 "fi\0" \
 302         "trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \
 303                 "setenv mmckernfile uImage; run trymmckernboot\0" \
 304         "trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \
 305                 "setenv mmcpart 2; run trymmcpartboot;" \
 306                 "setenv mmcpart 3; run trymmcpartboot;" \
 307                 "setenv mmcpart 4; run trymmcpartboot\0" \
 308         "trymmcboot=if run switchmmc; then " \
 309                         "setenv mmctype fat;" \
 310                         "run trymmcallpartboot;" \
 311                         "setenv mmctype ext2;" \
 312                         "run trymmcallpartboot;" \
 313                         "setenv mmctype ext4;" \
 314                         "run trymmcallpartboot;" \
 315                 "fi\0" \
 316         "emmcboot=setenv mmcnum 1; run trymmcboot\0" \
 317         "sdboot=setenv mmcnum 0; run trymmcboot\0" \
 318         "menucmd=bootmenu\0" \
 319         "bootmenu_0=Attached kernel=run attachboot\0" \
 320         "bootmenu_1=Internal eMMC=run emmcboot\0" \
 321         "bootmenu_2=External SD card=run sdboot\0" \
 322         "bootmenu_3=U-Boot boot order=boot\0" \
 323         "bootmenu_delay=30\0" \
 324         ""
 325
 326 #define CONFIG_PREBOOT \
 327         "setenv mmcnum 1; setenv mmcpart 1;" \
 328         "setenv mmcscriptfile bootmenu.scr;" \
 329         "if run switchmmc; then " \
 330                 "setenv mmcdone true;" \
 331                 "setenv mmctype fat;" \
 332                 "if run scriptload; then true; else " \
 333                         "setenv mmctype ext2;" \
 334                         "if run scriptload; then true; else " \
 335                                 "setenv mmctype ext4;" \
 336                                 "if run scriptload; then true; else " \
 337                                         "setenv mmcdone false;" \
 338                                 "fi;" \
 339                         "fi;" \
 340                 "fi;" \
 341                 "if ${mmcdone}; then " \
 342                         "run scriptboot;" \
 343                 "fi;" \
 344         "fi;" \
 345         "if run slide; then true; else " \
 346                 "setenv bootmenu_delay 0;" \
 347                 "setenv bootdelay 0;" \
 348         "fi"
 349
 350 #define CONFIG_POSTBOOTMENU \
 351         "echo;" \
 352         "echo Extra commands:;" \
 353         "echo run sercon - Use serial port for control.;" \
 354         "echo run usbcon - Use usbtty for control.;" \
 355         "echo run vgacon - Use framebuffer/keyboard.;" \
 356         "echo run sdboot - Boot from SD card slot.;" \
 357         "echo run emmcboot - Boot internal eMMC memory.;" \
 358         "echo run attachboot - Boot attached kernel image.;" \
 359         "echo"
 360
 361 #define CONFIG_BOOTCOMMAND \
 362         "run sdboot;" \
 363         "run emmcboot;" \
 364         "run attachboot;" \
 365         "echo"
 366
 367 #define CONFIG_MENU
 368 #define CONFIG_MENU_SHOW
 369
 370 /*
 371  * Miscellaneous configurable options
 372  */
 373 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 374 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 375 /* Print Buffer Size */
 376 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 377                                                 sizeof(CONFIG_SYS_PROMPT) + 16)
 378 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 379 /* Boot Argument Buffer Size */
 380 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
 381
 382 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)
 383 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/
 384
 385 /* default load address */
 386 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0)
 387
 388 /*
 389  * OMAP3 has 12 GP timers, they can be driven by the system clock
 390  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 391  * This rate is divided by a local divisor.
 392  */
 393 #define CONFIG_SYS_TIMERBASE            (OMAP34XX_GPT2)
 394 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
 395
 396 /*
 397  * Stack sizes
 398  *
 399  * The stack sizes are set up in start.S using the settings below
 400  */
 401 #define CONFIG_STACKSIZE                (128 << 10) /* regular stack 128 KiB */
 402
 403 /*
 404  * Physical Memory Map
 405  */
 406 #define CONFIG_NR_DRAM_BANKS            2
 407 #define PHYS_SDRAM_1                    OMAP34XX_SDRC_CS0
 408
 409 /*
 410  * FLASH and environment organization
 411  */
 412
 413 #define CONFIG_ENV_IS_NOWHERE
 414
 415 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 416 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 417 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 418 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 419                         CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 420
 421 /*
 422  * Attached kernel image
 423  */
 424
 425 #define SDRAM_SIZE                      0x10000000      /* 256 MB */
 426 #define SDRAM_END                       (CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE)
 427
 428 #define IMAGE_MAXSIZE                   0x1FF800        /* 2 MB - 2 kB */
 429 #define KERNEL_OFFSET                   0x40000         /* 256 kB */
 430 #define KERNEL_MAXSIZE                  (IMAGE_MAXSIZE-KERNEL_OFFSET)
 431 #define KERNEL_ADDRESS                  (SDRAM_END-KERNEL_MAXSIZE)
 432
 433 /* Reserve protected RAM for attached kernel */
 434 #define CONFIG_PRAM                     ((KERNEL_MAXSIZE >> 10)+1)
 435
 436 #endif /* __CONFIG_H */