2 * (C) Copyright 2011-2012
3 * Pali Rohár <pali.rohar@gmail.com>
6 * Alistair Buxton <a.j.buxton@gmail.com>
8 * Derived from Beagle Board code:
9 * (C) Copyright 2006-2008
11 * Richard Woodruff <r-woodruff2@ti.com>
12 * Syed Mohammed Khasim <x0khasim@ti.com>
14 * Configuration settings for the Nokia RX-51 aka N900.
16 * SPDX-License-Identifier: GPL-2.0+
23 * High Level Configuration Options
25 #define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */
27 #define CONFIG_MACH_TYPE MACH_TYPE_NOKIA_RX51
30 * Nokia X-Loader loading secondary image to address 0x80400000
31 * NOLO loading boot image to random place, so it doesn't really
32 * matter what we set this to. We have to copy u-boot to this address
34 #define CONFIG_SYS_TEXT_BASE 0x80008000
36 #include <asm/arch/cpu.h> /* get chip and board defs */
37 #include <asm/arch/omap.h>
38 #include <asm/arch/mem.h>
39 #include <linux/stringify.h>
42 #define V_OSCK 26000000 /* Clock output from T2 */
43 #define V_SCLK (V_OSCK >> 1)
45 #define CONFIG_MISC_INIT_R
46 #define CONFIG_SKIP_LOWLEVEL_INIT /* X-Loader set everything up */
48 #define CONFIG_CMDLINE_TAG /* enable passing kernel command line string */
49 #define CONFIG_INITRD_TAG /* enable passing initrd */
50 #define CONFIG_REVISION_TAG /* enable passing revision tag*/
51 #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
54 * Size of malloc() pool
56 #define CONFIG_ENV_SIZE (128 << 10)
57 #define CONFIG_UBI_SIZE (512 << 10)
58 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \
66 * NS16550 Configuration
68 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
70 #define CONFIG_SYS_NS16550_SERIAL
71 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
72 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
75 * select serial console configuration
77 #define CONFIG_CONS_INDEX 3
78 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
79 #define CONFIG_SERIAL3 3 /* UART3 on RX-51 */
81 /* allow to overwrite serial and ethaddr */
82 #define CONFIG_ENV_OVERWRITE
83 #define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }
85 /* USB device configuration */
86 #define CONFIG_USB_DEVICE
87 #define CONFIG_USBD_VENDORID 0x0421
88 #define CONFIG_USBD_PRODUCTID 0x01c8
89 #define CONFIG_USBD_MANUFACTURER "Nokia"
90 #define CONFIG_USBD_PRODUCT_NAME "N900"
92 /* commands to include */
94 #define CONFIG_CMDLINE_EDITING /* add command line history */
95 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */
97 #define CONFIG_SYS_I2C
102 #define CONFIG_TWL4030_LED
103 #define CONFIG_TWL4030_KEYPAD
105 #define GPIO_SLIDE 71
108 * Board ONENAND Info.
111 #define PART1_NAME "bootloader"
112 #define PART1_SIZE 128
113 #define PART1_MULL 1024
114 #define PART1_SUFF "k"
115 #define PART1_OFFS 0x00000000
116 #define PART1_MASK 0x00000003
118 #define PART2_NAME "config"
119 #define PART2_SIZE 384
120 #define PART2_MULL 1024
121 #define PART2_SUFF "k"
122 #define PART2_OFFS 0x00020000
123 #define PART2_MASK 0x00000000
125 #define PART3_NAME "log"
126 #define PART3_SIZE 256
127 #define PART3_MULL 1024
128 #define PART3_SUFF "k"
129 #define PART3_OFFS 0x00080000
130 #define PART3_MASK 0x00000000
132 #define PART4_NAME "kernel"
134 #define PART4_MULL 1024*1024
135 #define PART4_SUFF "m"
136 #define PART4_OFFS 0x000c0000
137 #define PART4_MASK 0x00000000
139 #define PART5_NAME "initfs"
141 #define PART5_MULL 1024*1024
142 #define PART5_SUFF "m"
143 #define PART5_OFFS 0x002c0000
144 #define PART5_MASK 0x00000000
146 #define PART6_NAME "rootfs"
147 #define PART6_SIZE 257280
148 #define PART6_MULL 1024
149 #define PART6_SUFF "k"
150 #define PART6_OFFS 0x004c0000
151 #define PART6_MASK 0x00000000
153 #ifdef ONENAND_SUPPORT
155 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
156 #define CONFIG_MTD_DEVICE
157 #define CONFIG_MTD_PARTITIONS
161 /* Watchdog support */
162 #define CONFIG_HW_WATCHDOG
168 #define CONFIG_VIDEO_LOGO
169 #define VIDEO_FB_16BPP_PIXEL_SWAP
170 #define VIDEO_FB_16BPP_WORD_SWAP
171 #define CONFIG_SPLASH_SCREEN
173 /* functions for cfb_console */
174 #define VIDEO_KBD_INIT_FCT rx51_kp_init()
175 #define VIDEO_TSTC_FCT rx51_kp_tstc
176 #define VIDEO_GETC_FCT rx51_kp_getc
179 int rx51_kp_init(void);
180 int rx51_kp_tstc(struct stdio_dev *sdev);
181 int rx51_kp_getc(struct stdio_dev *sdev);
184 /* Environment information */
185 #ifdef CONFIG_MTDPARTS_DEFAULT
186 #define MTDPARTS "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"
190 #define CONFIG_EXTRA_ENV_SETTINGS \
196 "setcon=setenv stdin ${con};" \
197 "setenv stdout ${con};" \
198 "setenv stderr ${con}\0" \
199 "sercon=setenv con serial; run setcon\0" \
200 "usbcon=setenv con usbtty; run setcon\0" \
201 "vgacon=setenv con vga; run setcon\0" \
202 "slide=gpio input " __stringify(GPIO_SLIDE) "\0" \
203 "switchmmc=mmc dev ${mmcnum}\0" \
204 "kernaddr=0x82008000\0" \
205 "initrdaddr=0x84008000\0" \
206 "scriptaddr=0x86008000\0" \
207 "fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \
208 "${loadaddr} ${mmcfile}\0" \
209 "kernload=setenv loadaddr ${kernaddr};" \
210 "setenv mmcfile ${mmckernfile};" \
212 "initrdload=setenv loadaddr ${initrdaddr};" \
213 "setenv mmcfile ${mmcinitrdfile};" \
215 "scriptload=setenv loadaddr ${scriptaddr};" \
216 "setenv mmcfile ${mmcscriptfile};" \
218 "scriptboot=echo Running ${mmcscriptfile} from mmc " \
219 "${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \
220 "kernboot=echo Booting ${mmckernfile} from mmc " \
221 "${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \
222 "kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\
223 "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \
224 "attachboot=echo Booting attached kernel image ...;" \
225 "setenv setup_omap_atag 1;" \
226 "bootm ${attkernaddr};" \
227 "setenv setup_omap_atag\0" \
228 "trymmcscriptboot=if run switchmmc; then " \
229 "if run scriptload; then " \
233 "trymmckernboot=if run switchmmc; then " \
234 "if run kernload; then " \
238 "trymmckerninitrdboot=if run switchmmc; then " \
239 "if run initrdload; then " \
240 "if run kernload; then " \
241 "run kerninitrdboot;" \
245 "trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \
246 "setenv mmckernfile uImage; run trymmckernboot\0" \
247 "trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \
248 "setenv mmcpart 2; run trymmcpartboot;" \
249 "setenv mmcpart 3; run trymmcpartboot;" \
250 "setenv mmcpart 4; run trymmcpartboot\0" \
251 "trymmcboot=if run switchmmc; then " \
252 "setenv mmctype fat;" \
253 "run trymmcallpartboot;" \
254 "setenv mmctype ext2;" \
255 "run trymmcallpartboot;" \
256 "setenv mmctype ext4;" \
257 "run trymmcallpartboot;" \
259 "emmcboot=setenv mmcnum 1; run trymmcboot\0" \
260 "sdboot=setenv mmcnum 0; run trymmcboot\0" \
261 "menucmd=bootmenu\0" \
262 "bootmenu_0=Attached kernel=run attachboot\0" \
263 "bootmenu_1=Internal eMMC=run emmcboot\0" \
264 "bootmenu_2=External SD card=run sdboot\0" \
265 "bootmenu_3=U-Boot boot order=boot\0" \
266 "bootmenu_delay=30\0" \
269 #define CONFIG_PREBOOT \
270 "setenv mmcnum 1; setenv mmcpart 1;" \
271 "setenv mmcscriptfile bootmenu.scr;" \
272 "if run switchmmc; then " \
273 "setenv mmcdone true;" \
274 "setenv mmctype fat;" \
275 "if run scriptload; then true; else " \
276 "setenv mmctype ext2;" \
277 "if run scriptload; then true; else " \
278 "setenv mmctype ext4;" \
279 "if run scriptload; then true; else " \
280 "setenv mmcdone false;" \
284 "if ${mmcdone}; then " \
288 "if run slide; then true; else " \
289 "setenv bootmenu_delay 0;" \
290 "setenv bootdelay 0;" \
293 #define CONFIG_POSTBOOTMENU \
295 "echo Extra commands:;" \
296 "echo run sercon - Use serial port for control.;" \
297 "echo run usbcon - Use usbtty for control.;" \
298 "echo run vgacon - Use framebuffer/keyboard.;" \
299 "echo run sdboot - Boot from SD card slot.;" \
300 "echo run emmcboot - Boot internal eMMC memory.;" \
301 "echo run attachboot - Boot attached kernel image.;" \
304 #define CONFIG_BOOTCOMMAND \
310 #define CONFIG_MENU_SHOW
313 * Miscellaneous configurable options
315 #define CONFIG_SYS_LONGHELP /* undef to save memory */
317 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
318 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/
320 /* default load address */
321 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0)
324 * OMAP3 has 12 GP timers, they can be driven by the system clock
325 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
326 * This rate is divided by a local divisor.
328 #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
329 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
332 * Physical Memory Map
334 #define CONFIG_NR_DRAM_BANKS 2
335 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
338 * FLASH and environment organization
341 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
342 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
343 #define CONFIG_SYS_INIT_RAM_SIZE 0x800
344 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
345 CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
348 * Attached kernel image
351 #define SDRAM_SIZE 0x10000000 /* 256 MB */
352 #define SDRAM_END (CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE)
354 #define IMAGE_MAXSIZE 0x1FF800 /* 2 MB - 2 kB */
355 #define KERNEL_OFFSET 0x40000 /* 256 kB */
356 #define KERNEL_MAXSIZE (IMAGE_MAXSIZE-KERNEL_OFFSET)
357 #define KERNEL_ADDRESS (SDRAM_END-KERNEL_MAXSIZE)
359 /* Reserve protected RAM for attached kernel */
360 #define CONFIG_PRAM ((KERNEL_MAXSIZE >> 10)+1)
362 #endif /* __CONFIG_H */