git.sur5r.net Git - u-boot/blob - include/configs/novena.h

   1 /*
   2  * Configuration settings for the Novena U-boot.
   3  *
   4  * Copyright (C) 2014 Marek Vasut <marex@denx.de>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 /* System configurations */
  13 #define CONFIG_BOARD_EARLY_INIT_F
  14 #define CONFIG_BOARD_LATE_INIT
  15 #define CONFIG_MISC_INIT_R
  16 #define CONFIG_DOS_PARTITION
  17 #define CONFIG_FAT_WRITE
  18 #define CONFIG_FIT
  19 #define CONFIG_KEYBOARD
  20 #define CONFIG_MXC_GPIO
  21 #define CONFIG_OF_LIBFDT
  22
  23 #include "mx6_common.h"
  24
  25 /* U-Boot Commands */
  26 #define CONFIG_CMD_ASKENV
  27 #define CONFIG_CMD_BMODE
  28 #define CONFIG_CMD_BOOTZ
  29 #define CONFIG_CMD_CACHE
  30 #define CONFIG_CMD_DHCP
  31 #define CONFIG_CMD_EEPROM
  32 #define CONFIG_CMD_EXT4
  33 #define CONFIG_CMD_EXT4_WRITE
  34 #define CONFIG_CMD_FAT
  35 #define CONFIG_CMD_FS_GENERIC
  36 #define CONFIG_CMD_I2C
  37 #define CONFIG_CMD_FUSE
  38 #define CONFIG_CMD_MII
  39 #define CONFIG_CMD_MMC
  40 #define CONFIG_CMD_NET
  41 #define CONFIG_CMD_PCI
  42 #define CONFIG_CMD_PING
  43 #define CONFIG_CMD_SATA
  44 #define CONFIG_CMD_SETEXPR
  45 #define CONFIG_CMD_TIME
  46 #define CONFIG_CMD_USB
  47 #define CONFIG_VIDEO
  48
  49 /* U-Boot general configurations */
  50 #define CONFIG_SYS_LONGHELP
  51 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O buffer size */
  52 #define CONFIG_SYS_MAXARGS      32              /* Max number of command args */
  53 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
  54                                                 /* Boot argument buffer size */
  55 #define CONFIG_VERSION_VARIABLE                 /* U-BOOT version */
  56 #define CONFIG_AUTO_COMPLETE                    /* Command auto complete */
  57 #define CONFIG_CMDLINE_EDITING                  /* Command history etc */
  58 #define CONFIG_SYS_HUSH_PARSER
  59
  60 /* U-Boot environment */
  61 #define CONFIG_ENV_OVERWRITE
  62 #define CONFIG_ENV_SIZE                 (16 * 1024)
  63 /*
  64  * Environment is on MMC, starting at offset 512KiB from start of the card.
  65  * Please place first partition at offset 1MiB from the start of the card
  66  * as recommended by GNU/fdisk. See below for details:
  67  * http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html
  68  */
  69 #ifdef CONFIG_CMD_MMC
  70 #define CONFIG_ENV_IS_IN_MMC
  71 #define CONFIG_SYS_MMC_ENV_DEV          0
  72 #define CONFIG_ENV_OFFSET               (512 * 1024)
  73 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
  74 #define CONFIG_ENV_OFFSET_REDUND        \
  75                 (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
  76 #else
  77 #define CONFIG_ENV_IS_NOWHERE
  78 #endif
  79
  80 /* Booting Linux */
  81 #define CONFIG_BOOTDELAY                5
  82 #define CONFIG_BOOTFILE                 "fitImage"
  83 #define CONFIG_BOOTARGS                 "console=ttymxc1,115200 "
  84 #define CONFIG_BOOTCOMMAND              "run net_nfs"
  85 #define CONFIG_LOADADDR                 0x18000000
  86 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
  87 #define CONFIG_HOSTNAME                 novena
  88
  89 /* Physical Memory Map */
  90 #define CONFIG_NR_DRAM_BANKS            1
  91 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
  92 #define PHYS_SDRAM_SIZE                 0xF0000000
  93
  94 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
  95 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  96 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  97
  98 #define CONFIG_SYS_INIT_SP_OFFSET \
  99         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 100 #define CONFIG_SYS_INIT_SP_ADDR \
 101         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 102
 103 #define CONFIG_SYS_MEMTEST_START        0x10000000
 104 #define CONFIG_SYS_MEMTEST_END          0x20000000
 105
 106 #define CONFIG_SYS_MALLOC_LEN           (64 * 1024 * 1024)
 107
 108 /* SPL */
 109 #define CONFIG_SPL_FAT_SUPPORT
 110 #define CONFIG_SPL_MMC_SUPPORT
 111 #include "imx6_spl.h"                   /* common IMX6 SPL configuration */
 112
 113 #define CONFIG_CMDLINE_TAG
 114 #define CONFIG_SETUP_MEMORY_TAGS
 115 #define CONFIG_INITRD_TAG
 116 #define CONFIG_REVISION_TAG
 117
 118 /* Ethernet Configuration */
 119 #ifdef CONFIG_CMD_NET
 120 #define CONFIG_FEC_MXC
 121 #define CONFIG_MII
 122 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 123 #define CONFIG_FEC_XCV_TYPE             RGMII
 124 #define CONFIG_ETHPRIME                 "FEC"
 125 #define CONFIG_FEC_MXC_PHYADDR          0x7
 126 #define CONFIG_PHYLIB
 127 #define CONFIG_PHY_MICREL
 128 #define CONFIG_PHY_MICREL_KSZ9021
 129 #define CONFIG_ARP_TIMEOUT              200UL
 130 #endif
 131
 132 /* I2C */
 133 #define CONFIG_SYS_I2C
 134 #define CONFIG_SYS_I2C_MXC
 135 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 136 #define CONFIG_I2C_MULTI_BUS
 137 #define CONFIG_I2C_MXC
 138 #define CONFIG_SYS_I2C_SPEED            100000
 139
 140 /* I2C EEPROM */
 141 #ifdef CONFIG_CMD_EEPROM
 142 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 143 #define CONFIG_SYS_SPD_BUS_NUM          2
 144 #endif
 145
 146 /* MMC Configs */
 147 #ifdef CONFIG_CMD_MMC
 148 #define CONFIG_MMC
 149 #define CONFIG_GENERIC_MMC
 150 #define CONFIG_BOUNCE_BUFFER
 151 #define CONFIG_FSL_ESDHC
 152 #define CONFIG_FSL_USDHC
 153 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 154 #define CONFIG_SYS_FSL_USDHC_NUM        2
 155 #endif
 156
 157 /* OCOTP Configs */
 158 #ifdef CONFIG_CMD_FUSE
 159 #define CONFIG_MXC_OCOTP
 160 #endif
 161
 162 /* PCI express */
 163 #ifdef CONFIG_CMD_PCI
 164 #define CONFIG_PCI
 165 #define CONFIG_PCI_PNP
 166 #define CONFIG_PCI_SCAN_SHOW
 167 #define CONFIG_PCIE_IMX
 168 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(3, 29)
 169 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(7, 12)
 170 #endif
 171
 172 /* PMIC */
 173 #define CONFIG_POWER
 174 #define CONFIG_POWER_I2C
 175 #define CONFIG_POWER_PFUZE100
 176 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 177
 178 /* SATA Configs */
 179 #ifdef CONFIG_CMD_SATA
 180 #define CONFIG_DWC_AHSATA
 181 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 182 #define CONFIG_DWC_AHSATA_PORT_ID       0
 183 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
 184 #define CONFIG_LBA48
 185 #define CONFIG_LIBATA
 186 #endif
 187
 188 /* UART */
 189 #define CONFIG_MXC_UART
 190 #define CONFIG_MXC_UART_BASE            UART2_BASE
 191 #define CONFIG_BAUDRATE                 115200
 192 #define CONFIG_CONS_INDEX               1
 193
 194 /* USB Configs */
 195 #ifdef CONFIG_CMD_USB
 196 #define CONFIG_USB_EHCI
 197 #define CONFIG_USB_EHCI_MX6
 198 #define CONFIG_USB_STORAGE
 199 #define CONFIG_USB_KEYBOARD
 200 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 201 #define CONFIG_USB_HOST_ETHER
 202 #define CONFIG_USB_ETHER_ASIX
 203 #define CONFIG_USB_ETHER_SMSC95XX
 204 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 205 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 206 #define CONFIG_MXC_USB_FLAGS            0
 207 /* Gadget part */
 208 #define CONFIG_CI_UDC
 209 #define CONFIG_USBD_HS
 210 #define CONFIG_USB_GADGET_DUALSPEED
 211 #define CONFIG_USB_ETHER
 212 #define CONFIG_USB_ETH_CDC
 213 #define CONFIG_NETCONSOLE
 214 #endif
 215
 216 /* Video output */
 217 #ifdef CONFIG_VIDEO
 218 #define CONFIG_VIDEO_IPUV3
 219 #define CONFIG_CFB_CONSOLE
 220 #define CONFIG_VGA_AS_SINGLE_DEVICE
 221 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 222 #define CONFIG_VIDEO_BMP_RLE8
 223 #define CONFIG_SPLASH_SCREEN
 224 #define CONFIG_BMP_16BPP
 225 #define CONFIG_VIDEO_LOGO
 226 #define CONFIG_IPUV3_CLK                260000000
 227 #define CONFIG_CMD_HDMIDETECT
 228 #define CONFIG_CONSOLE_MUX
 229 #define CONFIG_IMX_HDMI
 230 #define CONFIG_IMX_VIDEO_SKIP
 231 #endif
 232
 233 /* Extra U-Boot environment. */
 234 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 235         "fdt_high=0xffffffff\0"                                         \
 236         "initrd_high=0xffffffff\0"                                      \
 237         "consdev=ttymxc1\0"                                             \
 238         "baudrate=115200\0"                                             \
 239         "bootdev=/dev/mmcblk0p1\0"                                      \
 240         "rootdev=/dev/mmcblk0p2\0"                                      \
 241         "netdev=eth0\0"                                                 \
 242         "kernel_addr_r=0x18000000\0"                                    \
 243         "addcons="                                                      \
 244                 "setenv bootargs ${bootargs} "                          \
 245                 "console=${consdev},${baudrate}\0"                      \
 246         "addip="                                                        \
 247                 "setenv bootargs ${bootargs} "                          \
 248                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
 249                         "${netmask}:${hostname}:${netdev}:off\0"        \
 250         "addmisc="                                                      \
 251                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
 252         "addargs=run addcons addmisc\0"                                 \
 253         "mmcload="                                                      \
 254                 "mmc rescan ; "                                         \
 255                 "ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0"       \
 256         "netload="                                                      \
 257                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
 258         "miscargs=nohlt panic=1\0"                                      \
 259         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
 260         "nfsargs="                                                      \
 261                 "setenv bootargs root=/dev/nfs rw "                     \
 262                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
 263         "mmc_mmc="                                                      \
 264                 "run mmcload mmcargs addargs ; "                        \
 265                 "bootm ${kernel_addr_r}\0"                              \
 266         "mmc_nfs="                                                      \
 267                 "run mmcload nfsargs addip addargs ; "                  \
 268                 "bootm ${kernel_addr_r}\0"                              \
 269         "net_mmc="                                                      \
 270                 "run netload mmcargs addargs ; "                        \
 271                 "bootm ${kernel_addr_r}\0"                              \
 272         "net_nfs="                                                      \
 273                 "run netload nfsargs addip addargs ; "                  \
 274                 "bootm ${kernel_addr_r}\0"                              \
 275         "update_sd_spl_filename=SPL\0"                                  \
 276         "update_sd_uboot_filename=u-boot.img\0"                         \
 277         "update_sd_firmware="   /* Update the SD firmware partition */  \
 278                 "if mmc rescan ; then "                                 \
 279                 "if dhcp ${update_sd_spl_filename} ; then "             \
 280                 "mmc write ${loadaddr} 2 0x200 ; "                      \
 281                 "fi ; "                                                 \
 282                 "if dhcp ${update_sd_uboot_filename} ; then "           \
 283                 "fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\
 284                 "fi ; "                                                 \
 285                 "fi\0"                                                  \
 286
 287 #endif                          /* __CONFIG_H */