]> git.sur5r.net Git - u-boot/blob - include/configs/omap3_igep00x0.h
ARM: omap: clean redundant PISMO_xx macros used in OMAP3
[u-boot] / include / configs / omap3_igep00x0.h
1 /*
2  * Common configuration settings for IGEP technology based boards
3  *
4  * (C) Copyright 2012
5  * ISEE 2007 SL, <www.iseebcn.com>
6  *
7  * SPDX-License-Identifier:     GPL-2.0+
8  */
9
10 #ifndef __IGEP00X0_H
11 #define __IGEP00X0_H
12
13 #ifdef CONFIG_BOOT_NAND
14 #define CONFIG_NAND
15 #endif
16
17 #define CONFIG_NR_DRAM_BANKS            2
18
19 #include <configs/ti_omap3_common.h>
20 #include <asm/mach-types.h>
21
22 /*
23  * Display CPU and Board information
24  */
25 #define CONFIG_DISPLAY_CPUINFO          1
26 #define CONFIG_DISPLAY_BOARDINFO        1
27
28 #define CONFIG_MISC_INIT_R
29
30 #define CONFIG_REVISION_TAG             1
31
32 #define CONFIG_SUPPORT_RAW_INITRD
33
34 /* define to enable boot progress via leds */
35 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
36     (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
37 #define CONFIG_SHOW_BOOT_PROGRESS
38 #endif
39
40 /* GPIO banks */
41 #define CONFIG_OMAP3_GPIO_3             /* GPIO64 .. 95 is in GPIO bank 3 */
42 #define CONFIG_OMAP3_GPIO_5             /* GPIO128..159 is in GPIO bank 5 */
43 #define CONFIG_OMAP3_GPIO_6             /* GPIO160..191 is in GPIO bank 6 */
44
45 /* USB */
46 #define CONFIG_MUSB_UDC                 1
47 #define CONFIG_USB_OMAP3                1
48 #define CONFIG_TWL4030_USB              1
49
50 /* USB device configuration */
51 #define CONFIG_USB_DEVICE               1
52 #define CONFIG_USB_TTY                  1
53 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    1
54
55 /* Change these to suit your needs */
56 #define CONFIG_USBD_VENDORID            0x0451
57 #define CONFIG_USBD_PRODUCTID           0x5678
58 #define CONFIG_USBD_MANUFACTURER        "Texas Instruments"
59 #define CONFIG_USBD_PRODUCT_NAME        "IGEP"
60
61 #define CONFIG_CMD_CACHE
62 #ifdef CONFIG_BOOT_ONENAND
63 #define CONFIG_CMD_ONENAND      /* ONENAND support              */
64 #endif
65 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
66     (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032)
67 #define CONFIG_CMD_NET          /* bootp, tftpboot, rarpboot    */
68 #endif
69 #define CONFIG_CMD_DHCP
70 #define CONFIG_CMD_PING
71 #define CONFIG_CMD_NFS          /* NFS support                  */
72
73 /*#undef CONFIG_ENV_IS_NOWHERE*/
74
75 #define CONFIG_EXTRA_ENV_SETTINGS \
76         "usbtty=cdc_acm\0" \
77         "loadaddr=0x82000000\0" \
78         "dtbaddr=0x81600000\0" \
79         "bootdir=/boot\0" \
80         "bootfile=zImage\0" \
81         "usbtty=cdc_acm\0" \
82         "console=ttyO2,115200n8\0" \
83         "mpurate=auto\0" \
84         "vram=12M\0" \
85         "dvimode=1024x768MR-16@60\0" \
86         "defaultdisplay=dvi\0" \
87         "mmcdev=0\0" \
88         "mmcroot=/dev/mmcblk0p2 rw\0" \
89         "mmcrootfstype=ext4 rootwait\0" \
90         "nandroot=/dev/mtdblock4 rw\0" \
91         "nandrootfstype=jffs2\0" \
92         "mmcargs=setenv bootargs console=${console} " \
93                 "mpurate=${mpurate} " \
94                 "vram=${vram} " \
95                 "omapfb.mode=dvi:${dvimode} " \
96                 "omapfb.debug=y " \
97                 "omapdss.def_disp=${defaultdisplay} " \
98                 "root=${mmcroot} " \
99                 "rootfstype=${mmcrootfstype}\0" \
100         "nandargs=setenv bootargs console=${console} " \
101                 "mpurate=${mpurate} " \
102                 "vram=${vram} " \
103                 "omapfb.mode=dvi:${dvimode} " \
104                 "omapfb.debug=y " \
105                 "omapdss.def_disp=${defaultdisplay} " \
106                 "root=${nandroot} " \
107                 "rootfstype=${nandrootfstype}\0" \
108         "loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
109         "importbootenv=echo Importing environment from mmc ...; " \
110                 "env import -t $loadaddr $filesize\0" \
111         "loadzimage=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}\0" \
112         "loadfdt=load mmc ${mmcdev}:2 ${dtbaddr} ${bootdir}/${dtbfile}\0" \
113         "mmcboot=echo Booting from mmc ...; " \
114                 "run mmcargs; " \
115                 "bootz ${loadaddr}\0" \
116         "mmcbootfdt=echo Booting with DT from mmc ...; " \
117                 "bootz ${loadaddr} - ${dtbaddr}\0" \
118         "nandboot=echo Booting from onenand ...; " \
119                 "run nandargs; " \
120                 "onenand read ${loadaddr} 280000 400000; " \
121                 "bootz ${loadaddr}\0" \
122
123 #define CONFIG_BOOTCOMMAND \
124         "mmc dev ${mmcdev}; if mmc rescan; then " \
125                 "echo SD/MMC found on device ${mmcdev};" \
126                 "if run loadbootenv; then " \
127                         "run importbootenv;" \
128                 "fi;" \
129                 "if test -n $uenvcmd; then " \
130                         "echo Running uenvcmd ...;" \
131                         "run uenvcmd;" \
132                 "fi;" \
133                 "if run loadzimage; then " \
134                         "if test -n $dtbfile; then " \
135                                 "if run loadfdt; then " \
136                                         "run mmcbootfdt;" \
137                                 "fi;" \
138                         "fi;" \
139                         "run mmcboot;" \
140                 "fi;" \
141         "fi;" \
142         "run nandboot;" \
143
144 /*
145  * FLASH and environment organization
146  */
147
148 #ifdef CONFIG_BOOT_ONENAND
149 #define CONFIG_SYS_ONENAND_BASE         ONENAND_MAP
150
151 #define ONENAND_ENV_OFFSET              0x260000 /* environment starts here */
152
153 #define CONFIG_ENV_IS_IN_ONENAND        1
154 #define CONFIG_ENV_SIZE                 (512 << 10) /* Total Size Environment */
155 #define CONFIG_ENV_ADDR                 ONENAND_ENV_OFFSET
156 #endif
157
158 #ifdef CONFIG_NAND
159 #define CONFIG_ENV_OFFSET               0x260000 /* environment starts here */
160 #define CONFIG_ENV_IS_IN_NAND           1
161 #define CONFIG_ENV_SIZE                 (512 << 10) /* Total Size Environment */
162 #define CONFIG_ENV_ADDR                 NAND_ENV_OFFSET
163 #endif
164
165 /*
166  * SMSC911x Ethernet
167  */
168 #if defined(CONFIG_CMD_NET)
169 #define CONFIG_SMC911X
170 #define CONFIG_SMC911X_32_BIT
171 #define CONFIG_SMC911X_BASE     0x2C000000
172 #endif /* (CONFIG_CMD_NET) */
173
174 /* OneNAND boot config */
175 #ifdef CONFIG_BOOT_ONENAND
176 #define CONFIG_SPL_ONENAND_SUPPORT
177 #define CONFIG_SYS_ONENAND_U_BOOT_OFFS  0x80000
178 #define CONFIG_SYS_ONENAND_PAGE_SIZE    2048
179 #define CONFIG_SPL_ONENAND_LOAD_ADDR    0x80000
180 #define CONFIG_SPL_ONENAND_LOAD_SIZE    \
181         (512 * 1024 - CONFIG_SPL_ONENAND_LOAD_ADDR)
182
183 #endif
184
185 /* NAND boot config */
186 #ifdef CONFIG_NAND
187 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT  16
188 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
189 #define CONFIG_SYS_NAND_PAGE_COUNT      64
190 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
191 #define CONFIG_SYS_NAND_OOBSIZE         64
192 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
193 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
194 #define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9,\
195                                                 10, 11, 12, 13}
196 #define CONFIG_SYS_NAND_ECCSIZE         512
197 #define CONFIG_SYS_NAND_ECCBYTES        3
198 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_HW
199 #endif
200
201 #endif /* __IGEP00X0_H */