]> git.sur5r.net Git - u-boot/blob - include/configs/omap3_igep00x0.h
Merge git://git.denx.de/u-boot-ti
[u-boot] / include / configs / omap3_igep00x0.h
1 /*
2  * Common configuration settings for IGEP technology based boards
3  *
4  * (C) Copyright 2012
5  * ISEE 2007 SL, <www.iseebcn.com>
6  *
7  * SPDX-License-Identifier:     GPL-2.0+
8  */
9
10 #ifndef __IGEP00X0_H
11 #define __IGEP00X0_H
12
13 #ifdef CONFIG_BOOT_NAND
14 #define CONFIG_NAND
15 #endif
16
17 #define CONFIG_NR_DRAM_BANKS            2
18
19 #include <configs/ti_omap3_common.h>
20 #include <asm/mach-types.h>
21
22 /*
23  * Display CPU and Board information
24  */
25 #define CONFIG_DISPLAY_CPUINFO          1
26 #define CONFIG_DISPLAY_BOARDINFO        1
27
28 #define CONFIG_MISC_INIT_R
29
30 #define CONFIG_REVISION_TAG             1
31
32 /* define to enable boot progress via leds */
33 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
34     (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
35 #define CONFIG_SHOW_BOOT_PROGRESS
36 #endif
37
38 /* GPIO banks */
39 #define CONFIG_OMAP3_GPIO_3             /* GPIO64 .. 95 is in GPIO bank 3 */
40 #define CONFIG_OMAP3_GPIO_5             /* GPIO128..159 is in GPIO bank 5 */
41 #define CONFIG_OMAP3_GPIO_6             /* GPIO160..191 is in GPIO bank 6 */
42
43 /* USB */
44 #define CONFIG_MUSB_UDC                 1
45 #define CONFIG_USB_OMAP3                1
46 #define CONFIG_TWL4030_USB              1
47
48 /* USB device configuration */
49 #define CONFIG_USB_DEVICE               1
50 #define CONFIG_USB_TTY                  1
51 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    1
52
53 /* Change these to suit your needs */
54 #define CONFIG_USBD_VENDORID            0x0451
55 #define CONFIG_USBD_PRODUCTID           0x5678
56 #define CONFIG_USBD_MANUFACTURER        "Texas Instruments"
57 #define CONFIG_USBD_PRODUCT_NAME        "IGEP"
58
59 #define CONFIG_CMD_CACHE
60 #ifdef CONFIG_BOOT_ONENAND
61 #define CONFIG_CMD_ONENAND      /* ONENAND support              */
62 #endif
63 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
64     (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032)
65 #define CONFIG_CMD_NET          /* bootp, tftpboot, rarpboot    */
66 #endif
67 #define CONFIG_CMD_DHCP
68 #define CONFIG_CMD_PING
69 #define CONFIG_CMD_NFS          /* NFS support                  */
70
71 /*#undef CONFIG_ENV_IS_NOWHERE*/
72
73 #define CONFIG_EXTRA_ENV_SETTINGS \
74         "usbtty=cdc_acm\0" \
75         "loadaddr=0x82000000\0" \
76         "dtbaddr=0x81600000\0" \
77         "bootdir=/boot\0" \
78         "bootfile=zImage\0" \
79         "usbtty=cdc_acm\0" \
80         "console=ttyO2,115200n8\0" \
81         "mpurate=auto\0" \
82         "vram=12M\0" \
83         "dvimode=1024x768MR-16@60\0" \
84         "defaultdisplay=dvi\0" \
85         "mmcdev=0\0" \
86         "mmcroot=/dev/mmcblk0p2 rw\0" \
87         "mmcrootfstype=ext4 rootwait\0" \
88         "nandroot=/dev/mtdblock4 rw\0" \
89         "nandrootfstype=jffs2\0" \
90         "mmcargs=setenv bootargs console=${console} " \
91                 "mpurate=${mpurate} " \
92                 "vram=${vram} " \
93                 "omapfb.mode=dvi:${dvimode} " \
94                 "omapfb.debug=y " \
95                 "omapdss.def_disp=${defaultdisplay} " \
96                 "root=${mmcroot} " \
97                 "rootfstype=${mmcrootfstype}\0" \
98         "nandargs=setenv bootargs console=${console} " \
99                 "mpurate=${mpurate} " \
100                 "vram=${vram} " \
101                 "omapfb.mode=dvi:${dvimode} " \
102                 "omapfb.debug=y " \
103                 "omapdss.def_disp=${defaultdisplay} " \
104                 "root=${nandroot} " \
105                 "rootfstype=${nandrootfstype}\0" \
106         "loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
107         "importbootenv=echo Importing environment from mmc ...; " \
108                 "env import -t $loadaddr $filesize\0" \
109         "loadzimage=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}\0" \
110         "loadfdt=load mmc ${mmcdev}:2 ${dtbaddr} ${bootdir}/${dtbfile}\0" \
111         "mmcboot=echo Booting from mmc ...; " \
112                 "run mmcargs; " \
113                 "bootz ${loadaddr}\0" \
114         "mmcbootfdt=echo Booting with DT from mmc ...; " \
115                 "bootz ${loadaddr} - ${dtbaddr}\0" \
116         "nandboot=echo Booting from onenand ...; " \
117                 "run nandargs; " \
118                 "onenand read ${loadaddr} 280000 400000; " \
119                 "bootz ${loadaddr}\0" \
120
121 #define CONFIG_BOOTCOMMAND \
122         "mmc dev ${mmcdev}; if mmc rescan; then " \
123                 "echo SD/MMC found on device ${mmcdev};" \
124                 "if run loadbootenv; then " \
125                         "run importbootenv;" \
126                 "fi;" \
127                 "if test -n $uenvcmd; then " \
128                         "echo Running uenvcmd ...;" \
129                         "run uenvcmd;" \
130                 "fi;" \
131                 "if run loadzimage; then " \
132                         "if test -n $dtbfile; then " \
133                                 "if run loadfdt; then " \
134                                         "run mmcbootfdt;" \
135                                 "fi;" \
136                         "fi;" \
137                         "run mmcboot;" \
138                 "fi;" \
139         "fi;" \
140         "run nandboot;" \
141
142 /*
143  * FLASH and environment organization
144  */
145
146 #ifdef CONFIG_BOOT_ONENAND
147 #define CONFIG_SYS_ONENAND_BASE         ONENAND_MAP
148
149 #define ONENAND_ENV_OFFSET              0x260000 /* environment starts here */
150
151 #define CONFIG_ENV_IS_IN_ONENAND        1
152 #define CONFIG_ENV_SIZE                 (512 << 10) /* Total Size Environment */
153 #define CONFIG_ENV_ADDR                 ONENAND_ENV_OFFSET
154 #endif
155
156 #ifdef CONFIG_NAND
157 #define CONFIG_ENV_OFFSET               0x260000 /* environment starts here */
158 #define CONFIG_ENV_IS_IN_NAND           1
159 #define CONFIG_ENV_SIZE                 (512 << 10) /* Total Size Environment */
160 #define CONFIG_ENV_ADDR                 NAND_ENV_OFFSET
161 #endif
162
163 /*
164  * SMSC911x Ethernet
165  */
166 #if defined(CONFIG_CMD_NET)
167 #define CONFIG_SMC911X
168 #define CONFIG_SMC911X_32_BIT
169 #define CONFIG_SMC911X_BASE     0x2C000000
170 #endif /* (CONFIG_CMD_NET) */
171
172 /* OneNAND boot config */
173 #ifdef CONFIG_BOOT_ONENAND
174 #define CONFIG_SPL_ONENAND_SUPPORT
175 #define CONFIG_SYS_ONENAND_U_BOOT_OFFS  0x80000
176 #define CONFIG_SYS_ONENAND_PAGE_SIZE    2048
177 #define CONFIG_SPL_ONENAND_LOAD_ADDR    0x80000
178 #define CONFIG_SPL_ONENAND_LOAD_SIZE    \
179         (512 * 1024 - CONFIG_SPL_ONENAND_LOAD_ADDR)
180
181 #endif
182
183 /* NAND boot config */
184 #ifdef CONFIG_NAND
185 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT  16
186 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
187 #define CONFIG_SYS_NAND_PAGE_COUNT      64
188 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
189 #define CONFIG_SYS_NAND_OOBSIZE         64
190 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
191 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
192 #define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9,\
193                                                 10, 11, 12, 13}
194 #define CONFIG_SYS_NAND_ECCSIZE         512
195 #define CONFIG_SYS_NAND_ECCBYTES        3
196 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_HW
197 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
198 /* NAND: SPL falcon mode configs */
199 #ifdef CONFIG_SPL_OS_BOOT
200 #define CONFIG_CMD_SPL_NAND_OFS         0x240000
201 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
202 #define CONFIG_CMD_SPL_WRITE_SIZE       0x2000
203 #endif
204 #endif
205
206 #endif /* __IGEP00X0_H */