3 * David Purdy <david.c.purdy@gmail.com>
5 * Based on Kirkwood support:
7 * Marvell Semiconductor <www.marvell.com>
8 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
10 * SPDX-License-Identifier: GPL-2.0+
13 #ifndef _CONFIG_POGO_E02_H
14 #define _CONFIG_POGO_E02_H
17 * Machine type definition and ID
19 #define CONFIG_MACH_TYPE MACH_TYPE_POGO_E02
22 * High Level Configuration Options (easy to change)
24 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
25 #define CONFIG_KW88F6281 /* SOC Name */
26 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
29 * Commands configuration
31 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
32 #define CONFIG_SYS_MVFS
33 #define CONFIG_CMD_ENV
34 #define CONFIG_CMD_NAND
37 * mv-common.h should be defined after CMD configs since it used them
38 * to enable certain macros
40 #include "mv-common.h"
43 * Environment variables configurations
45 #ifdef CONFIG_CMD_NAND
46 #define CONFIG_ENV_IS_IN_NAND
47 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
49 #define CONFIG_ENV_IS_NOWHERE
52 #define CONFIG_ENV_SIZE 0x20000 /* 128k */
53 #define CONFIG_ENV_OFFSET 0x60000 /* env starts here */
56 * Default environment variables
58 #define CONFIG_BOOTCOMMAND \
59 "setenv bootargs $(bootargs_console); " \
61 "bootm 0x00800000 0x01100000"
63 #define CONFIG_EXTRA_ENV_SETTINGS \
64 "mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \
65 "32M(rootfs),-(data)\0"\
66 "mtdids=nand0=orion_nand\0"\
67 "bootargs_console=console=ttyS0,115200\0" \
68 "bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \
69 "ext2load usb 0:1 0x01100000 /uInitrd\0"
72 * Ethernet Driver configuration
75 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
76 #define CONFIG_PHY_BASE_ADR 0
77 #endif /* CONFIG_CMD_NET */
82 #define CONFIG_CMD_JFFS2
83 #define CONFIG_CMD_UBIFS
85 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
86 #define CONFIG_MTD_PARTITIONS
87 #define CONFIG_CMD_MTDPARTS
90 #endif /* _CONFIG_POGO_E02_H */