]> git.sur5r.net Git - u-boot/blob - include/configs/sama5d3_xplained.h
x86: Remove CONFIG_SYS_EARLY_PCI_INIT
[u-boot] / include / configs / sama5d3_xplained.h
1 /*
2  * Configuration settings for the SAMA5D3 Xplained board.
3  *
4  * Copyright (C) 2014 Atmel Corporation
5  *                    Bo Shen <voice.shen@atmel.com>
6  *
7  * SPDX-License-Identifier:     GPL-2.0+
8  */
9
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12
13 /* No NOR flash, this definition should put before common header */
14 #define CONFIG_SYS_NO_FLASH
15
16 #include "at91-sama5_common.h"
17
18 /* serial console */
19 #define CONFIG_ATMEL_USART
20 #define CONFIG_USART_BASE               ATMEL_BASE_DBGU
21 #define CONFIG_USART_ID                 ATMEL_ID_DBGU
22
23 /*
24  * This needs to be defined for the OHCI code to work but it is defined as
25  * ATMEL_ID_UHPHS in the CPU specific header files.
26  */
27 #define ATMEL_ID_UHP                    ATMEL_ID_UHPHS
28
29 /*
30  * Specify the clock enable bit in the PMC_SCER register.
31  */
32 #define ATMEL_PMC_UHP                   AT91SAM926x_PMC_UHP
33
34 /* SDRAM */
35 #define CONFIG_NR_DRAM_BANKS            1
36 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
37 #define CONFIG_SYS_SDRAM_SIZE           0x10000000
38
39 #ifdef CONFIG_SPL_BUILD
40 #define CONFIG_SYS_INIT_SP_ADDR         0x310000
41 #else
42 #define CONFIG_SYS_INIT_SP_ADDR \
43         (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
44 #endif
45
46 /* NAND flash */
47 #define CONFIG_CMD_NAND
48
49 #ifdef CONFIG_CMD_NAND
50 #define CONFIG_NAND_ATMEL
51 #define CONFIG_SYS_MAX_NAND_DEVICE      1
52 #define CONFIG_SYS_NAND_BASE            ATMEL_BASE_CS3
53 /* our ALE is AD21 */
54 #define CONFIG_SYS_NAND_MASK_ALE        (1 << 21)
55 /* our CLE is AD22 */
56 #define CONFIG_SYS_NAND_MASK_CLE        (1 << 22)
57 #define CONFIG_SYS_NAND_ONFI_DETECTION
58 /* PMECC & PMERRLOC */
59 #define CONFIG_ATMEL_NAND_HWECC
60 #define CONFIG_ATMEL_NAND_HW_PMECC
61 #define CONFIG_PMECC_CAP                4
62 #define CONFIG_PMECC_SECTOR_SIZE        512
63 #define CONFIG_CMD_NAND_TRIMFFS
64 #define CONFIG_CMD_MTDPARTS
65
66 #define CONFIG_MTD_DEVICE
67 #define CONFIG_MTD_PARTITIONS
68 #define CONFIG_RBTREE
69 #define CONFIG_LZO
70 #define CONFIG_CMD_UBI
71 #define CONFIG_CMD_UBIFS
72 #endif
73
74 /* Ethernet Hardware */
75 #define CONFIG_MACB
76 #define CONFIG_RMII
77 #define CONFIG_NET_RETRY_COUNT          20
78 #define CONFIG_MACB_SEARCH_PHY
79 #define CONFIG_RGMII
80 #define CONFIG_CMD_MII
81 #define CONFIG_PHYLIB
82
83 /* MMC */
84 #define CONFIG_CMD_MMC
85
86 #ifdef CONFIG_CMD_MMC
87 #define CONFIG_MMC
88 #define CONFIG_GENERIC_MMC
89 #define CONFIG_GENERIC_ATMEL_MCI
90 #define CONFIG_ATMEL_MCI_8BIT
91 #endif
92
93 /* USB */
94 #define CONFIG_CMD_USB
95
96 #ifdef CONFIG_CMD_USB
97 #define CONFIG_USB_ATMEL
98 #define CONFIG_USB_ATMEL_CLK_SEL_UPLL
99 #define CONFIG_USB_OHCI_NEW
100 #define CONFIG_SYS_USB_OHCI_CPU_INIT
101 #define CONFIG_SYS_USB_OHCI_REGS_BASE           ATMEL_BASE_OHCI
102 #define CONFIG_SYS_USB_OHCI_SLOT_NAME           "SAMA5D3 Xplained"
103 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      2
104 #define CONFIG_DOS_PARTITION
105 #define CONFIG_USB_STORAGE
106 #endif
107
108 #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
109 #define CONFIG_CMD_FAT
110 #define CONFIG_FAT_WRITE
111 #define CONFIG_CMD_EXT4
112 #define CONFIG_CMD_EXT4_WRITE
113 #endif
114
115 #define CONFIG_SYS_LOAD_ADDR                    0x22000000 /* load address */
116
117 #if CONFIG_SYS_USE_NANDFLASH
118 /* override the bootcmd, bootargs and other configuration for nandflash env */
119 #elif CONFIG_SYS_USE_MMC
120 /* override the bootcmd, bootargs and other configuration for sd/mmc env */
121 #else
122 #define CONFIG_ENV_IS_NOWHERE
123 #endif
124
125 /* SPL */
126 #define CONFIG_SPL_FRAMEWORK
127 #define CONFIG_SPL_TEXT_BASE            0x300000
128 #define CONFIG_SPL_MAX_SIZE             0x10000
129 #define CONFIG_SPL_BSS_START_ADDR       0x20000000
130 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
131 #define CONFIG_SYS_SPL_MALLOC_START     0x20080000
132 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x80000
133
134 #define CONFIG_SPL_LIBCOMMON_SUPPORT
135 #define CONFIG_SPL_LIBGENERIC_SUPPORT
136 #define CONFIG_SPL_GPIO_SUPPORT
137 #define CONFIG_SPL_SERIAL_SUPPORT
138
139 #define CONFIG_SPL_BOARD_INIT
140 #define CONFIG_SYS_MONITOR_LEN          (512 << 10)
141
142 #ifdef CONFIG_SYS_USE_MMC
143 #define CONFIG_SPL_LDSCRIPT             arch/arm/mach-at91/armv7/u-boot-spl.lds
144 #define CONFIG_SPL_MMC_SUPPORT
145 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x400
146 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
147 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
148 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
149 #define CONFIG_SPL_FAT_SUPPORT
150 #define CONFIG_SPL_LIBDISK_SUPPORT
151
152 #elif CONFIG_SYS_USE_NANDFLASH
153 #define CONFIG_SPL_NAND_SUPPORT
154 #define CONFIG_SPL_NAND_DRIVERS
155 #define CONFIG_SPL_NAND_BASE
156 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x40000
157 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
158 #define CONFIG_SYS_NAND_PAGE_SIZE       0x800
159 #define CONFIG_SYS_NAND_PAGE_COUNT      64
160 #define CONFIG_SYS_NAND_OOBSIZE         64
161 #define CONFIG_SYS_NAND_BLOCK_SIZE      0x20000
162 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0x0
163 #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
164
165 #endif
166
167 #endif