2 * Configuration settings for the SAMA5D4 Xplained ultra board.
4 * Copyright (C) 2014 Atmel
5 * Bo Shen <voice.shen@atmel.com>
7 * SPDX-License-Identifier: GPL-2.0+
13 /* No NOR flash, this definition should put before common header */
14 #define CONFIG_SYS_NO_FLASH
16 #include "at91-sama5_common.h"
19 #define CONFIG_ATMEL_USART
20 #define CONFIG_USART_BASE ATMEL_BASE_USART3
21 #define CONFIG_USART_ID ATMEL_ID_USART3
24 #define CONFIG_NR_DRAM_BANKS 1
25 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
26 #define CONFIG_SYS_SDRAM_SIZE 0x20000000
28 #ifdef CONFIG_SPL_BUILD
29 #define CONFIG_SYS_INIT_SP_ADDR 0x210000
31 #define CONFIG_SYS_INIT_SP_ADDR \
32 (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
35 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
41 #define CONFIG_ATMEL_SPI
42 #define CONFIG_ATMEL_SPI0
43 #define CONFIG_SF_DEFAULT_BUS 0
44 #define CONFIG_SF_DEFAULT_CS 0
45 #define CONFIG_SF_DEFAULT_SPEED 30000000
49 #define CONFIG_CMD_NAND
51 #ifdef CONFIG_CMD_NAND
52 #define CONFIG_NAND_ATMEL
53 #define CONFIG_SYS_MAX_NAND_DEVICE 1
54 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
56 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
58 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
59 #define CONFIG_SYS_NAND_ONFI_DETECTION
60 /* PMECC & PMERRLOC */
61 #define CONFIG_ATMEL_NAND_HWECC
62 #define CONFIG_ATMEL_NAND_HW_PMECC
66 #define CONFIG_CMD_MMC
70 #define CONFIG_GENERIC_MMC
71 #define CONFIG_GENERIC_ATMEL_MCI
72 #define ATMEL_BASE_MMCI ATMEL_BASE_MCI1
76 #define CONFIG_CMD_USB
79 #define CONFIG_USB_EHCI
80 #define CONFIG_USB_EHCI_ATMEL
81 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
82 #define CONFIG_USB_STORAGE
86 #define CONFIG_USB_GADGET
87 #define CONFIG_USB_GADGET_DUALSPEED
88 #define CONFIG_USB_GADGET_ATMEL_USBA
89 #define CONFIG_USB_ETHER
90 #define CONFIG_USB_ETH_RNDIS
91 #define CONFIG_USBNET_MANUFACTURER "Atmel SAMA5D4EK"
93 #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
94 #define CONFIG_CMD_FAT
95 #define CONFIG_DOS_PARTITION
98 /* Ethernet Hardware */
101 #define CONFIG_NET_RETRY_COUNT 20
102 #define CONFIG_MACB_SEARCH_PHY
105 /* #define CONFIG_LCD */
107 #define LCD_BPP LCD_COLOR16
108 #define LCD_OUTPUT_BPP 24
109 #define CONFIG_LCD_LOGO
110 #define CONFIG_LCD_INFO
111 #define CONFIG_LCD_INFO_BELOW_LOGO
112 #define CONFIG_SYS_WHITE_ON_BLACK
113 #define CONFIG_ATMEL_HLCD
114 #define CONFIG_ATMEL_LCD_RGB565
115 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
118 #ifdef CONFIG_SYS_USE_SERIALFLASH
119 /* override the bootcmd, bootargs and other configuration for spi flash env */
120 #elif CONFIG_SYS_USE_NANDFLASH
121 /* override the bootcmd, bootargs and other configuration for nandflash env */
122 #elif CONFIG_SYS_USE_MMC
123 /* override the bootcmd, bootargs and other configuration for sd/mmc env */
127 #define CONFIG_SPL_FRAMEWORK
128 #define CONFIG_SPL_TEXT_BASE 0x200000
129 #define CONFIG_SPL_MAX_SIZE 0x10000
130 #define CONFIG_SPL_BSS_START_ADDR 0x20000000
131 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000
132 #define CONFIG_SYS_SPL_MALLOC_START 0x20080000
133 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
135 #define CONFIG_SPL_LIBCOMMON_SUPPORT
136 #define CONFIG_SPL_LIBGENERIC_SUPPORT
137 #define CONFIG_SPL_GPIO_SUPPORT
138 #define CONFIG_SPL_SERIAL_SUPPORT
140 #define CONFIG_SPL_BOARD_INIT
141 #define CONFIG_SYS_MONITOR_LEN (512 << 10)
143 #ifdef CONFIG_SYS_USE_MMC
144 #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds
145 #define CONFIG_SPL_MMC_SUPPORT
146 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400
147 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
148 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
149 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
150 #define CONFIG_SPL_FAT_SUPPORT
151 #define CONFIG_SPL_LIBDISK_SUPPORT
153 #elif CONFIG_SYS_USE_NANDFLASH
154 #define CONFIG_SPL_NAND_SUPPORT
155 #define CONFIG_SPL_NAND_DRIVERS
156 #define CONFIG_SPL_NAND_BASE
157 #define CONFIG_PMECC_CAP 8
158 #define CONFIG_PMECC_SECTOR_SIZE 512
159 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
160 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
161 #define CONFIG_SYS_NAND_PAGE_SIZE 0x1000
162 #define CONFIG_SYS_NAND_PAGE_COUNT 64
163 #define CONFIG_SYS_NAND_OOBSIZE 224
164 #define CONFIG_SYS_NAND_BLOCK_SIZE 0x40000
165 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0
166 #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
168 #elif CONFIG_SYS_USE_SERIALFLASH
169 #define CONFIG_SPL_SPI_SUPPORT
170 #define CONFIG_SPL_SPI_FLASH_SUPPORT
171 #define CONFIG_SPL_SPI_LOAD
172 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000