2 * (C) Copyright 2009 Samsung Electronics
3 * Minkyu Kang <mk7.kang@samsung.com>
4 * HeungJun Kim <riverful.kim@samsung.com>
5 * Inki Dae <inki.dae@samsung.com>
7 * Configuation settings for the SAMSUNG SMDKC100 board.
9 * SPDX-License-Identifier: GPL-2.0+
16 * High Level Configuration Options
19 #define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */
20 #define CONFIG_S5P 1 /* which is in a S5P Family */
21 #define CONFIG_S5PC100 1 /* which is in a S5PC100 */
23 #include <asm/arch/cpu.h> /* get chip and board defs */
25 #define CONFIG_ARCH_CPU_INIT
27 /* input clock of PLL: SMDKC100 has 12MHz input clock */
28 #define CONFIG_SYS_CLK_FREQ 12000000
31 #define CONFIG_SYS_SDRAM_BASE 0x30000000
35 #define CONFIG_SETUP_MEMORY_TAGS
36 #define CONFIG_CMDLINE_TAG
37 #define CONFIG_INITRD_TAG
40 * Size of malloc() pool
41 * 1MB = 0x100000, 0x100000 = 1024 * 1024
43 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
46 * select serial console configuration
48 #define CONFIG_SERIAL0 1 /* use SERIAL 0 on SMDKC100 */
53 /* allow to overwrite serial and ethaddr */
54 #define CONFIG_ENV_OVERWRITE
56 #define CONFIG_MTD_DEVICE
57 #define CONFIG_MTD_PARTITIONS
59 #define CONFIG_BOOTCOMMAND "run ubifsboot"
61 #define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext2" \
62 " console=ttySAC0,115200n8" \
65 #define CONFIG_COMMON_BOOT "console=ttySAC0,115200n8" \
67 " " CONFIG_MTDPARTS_DEFAULT
69 #define CONFIG_UPDATEB "updateb=onenand erase 0x0 0x40000;" \
70 " onenand write 0x32008000 0x0 0x40000\0"
72 #define CONFIG_ENV_OVERWRITE
73 #define CONFIG_EXTRA_ENV_SETTINGS \
76 "onenand erase 0x60000 0x300000;" \
77 "onenand write 0x31008000 0x60000 0x300000\0" \
79 "onenand erase block 147-4095;" \
80 "onenand write 0x32000000 0x1260000 0x8C0000\0" \
82 "onenand read 0x30007FC0 0x60000 0x300000;" \
83 "bootm 0x30007FC0\0" \
85 "set bootargs root=/dev/mtdblock${bootblock} " \
86 "rootfstype=${rootfstype} " \
87 "ubi.mtd=${ubiblock} ${opts} " CONFIG_COMMON_BOOT ";" \
90 "set bootargs root=ubi0!rootfs rootfstype=ubifs " \
91 " ubi.mtd=${ubiblock} ${opts} " CONFIG_COMMON_BOOT "; " \
93 "boottrace=setenv opts initcall_debug; run bootcmd\0" \
95 "set bootargs root=ubi0!ramdisk ubi.mtd=${ubiblock} " \
96 "rootfstype=ubifs init=/init.sh " CONFIG_COMMON_BOOT "; " \
99 "set bootargs root=/dev/nfs ubi.mtd=${ubiblock} " \
100 "nfsroot=${nfsroot},nolock " \
101 "ip=${ipaddr}:${serverip}:${gatewayip}:" \
102 "${netmask}:nowplus:usb0:off " CONFIG_COMMON_BOOT "; " \
105 "set bootargs " CONFIG_RAMDISK_BOOT \
106 " initrd=0x33000000,8M ramdisk=8192\0" \
107 "rootfstype=cramfs\0" \
108 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
109 "meminfo=mem=128M\0" \
110 "nfsroot=/nfsroot/arm\0" \
116 * Miscellaneous configurable options
118 #define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
119 /* memtest works on */
120 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
121 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5e00000)
122 #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
124 /* SMDKC100 has 1 banks of DRAM, we use only one in U-Boot */
125 #define CONFIG_NR_DRAM_BANKS 1
126 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* SDRAM Bank #1 */
127 #define PHYS_SDRAM_1_SIZE (128 << 20) /* 0x8000000, 128 MB Bank #1 */
129 #define CONFIG_SYS_MONITOR_BASE 0x00000000
131 /*-----------------------------------------------------------------------
132 * FLASH and environment organization
135 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 KiB */
137 #if !defined(CONFIG_NAND_SPL) && (CONFIG_SYS_TEXT_BASE >= 0xc0000000)
138 #define CONFIG_ENABLE_MMU
141 #ifdef CONFIG_ENABLE_MMU
142 #define CONFIG_SYS_MAPPED_RAM_BASE 0xc0000000
144 #define CONFIG_SYS_MAPPED_RAM_BASE CONFIG_SYS_SDRAM_BASE
147 /*-----------------------------------------------------------------------
150 #define CONFIG_ENV_SIZE (128 << 10) /* 128KiB, 0x20000 */
151 #define CONFIG_ENV_ADDR (256 << 10) /* 256KiB, 0x40000 */
152 #define CONFIG_ENV_OFFSET (256 << 10) /* 256KiB, 0x40000 */
154 #define CONFIG_USE_ONENAND_BOARD_INIT
155 #define CONFIG_SAMSUNG_ONENAND 1
156 #define CONFIG_SYS_ONENAND_BASE 0xE7100000
158 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
161 * Ethernet Contoller driver
163 #ifdef CONFIG_CMD_NET
164 #define CONFIG_ENV_SROM_BANK 3 /* Select SROM Bank-3 for Ethernet*/
165 #endif /* CONFIG_CMD_NET */
167 #endif /* __CONFIG_H */