2 * LG Optimus Black codename sniper config
4 * Copyright (C) 2015 Paul Kocialkowski <contact@paulk.fr>
6 * SPDX-License-Identifier: GPL-2.0+
12 #include <asm/arch/cpu.h>
13 #include <asm/arch/omap.h>
19 #define CONFIG_ARM_ARCH_CP15_ERRATA
20 #define CONFIG_ARM_ERRATA_454179
21 #define CONFIG_ARM_ERRATA_430973
22 #define CONFIG_ARM_ERRATA_621766
29 #define CONFIG_OMAP_COMMON
35 #define CONFIG_MISC_INIT_R
41 #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
42 #define CONFIG_SYS_PTV 2
44 #define V_NS16550_CLK 48000000
45 #define V_OSCK 26000000
46 #define V_SCLK (V_OSCK >> 1)
53 #define CONFIG_NR_DRAM_BANKS 2
54 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
55 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
61 #define CONFIG_SYS_TEXT_BASE 0x80100000
62 #define CONFIG_SYS_SDRAM_BASE 0x80000000
63 #define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
64 GENERATED_GBL_DATA_SIZE)
66 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024 + CONFIG_ENV_SIZE)
72 #define CONFIG_OMAP_GPIO
73 #define CONFIG_OMAP3_GPIO_2
74 #define CONFIG_OMAP3_GPIO_3
75 #define CONFIG_OMAP3_GPIO_4
76 #define CONFIG_OMAP3_GPIO_5
77 #define CONFIG_OMAP3_GPIO_6
83 #define CONFIG_SYS_I2C
84 #define CONFIG_SYS_OMAP24_I2C_SPEED 400000
85 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1
86 #define CONFIG_SYS_I2C_OMAP34XX
87 #define CONFIG_I2C_MULTI_BUS
93 #define CONFIG_SYS_NO_FLASH
100 #define CONFIG_GENERIC_MMC
101 #define CONFIG_OMAP_HSMMC
107 #define CONFIG_TWL4030_POWER
113 #define CONFIG_TWL4030_INPUT
119 #define CONFIG_PARTITION_UUIDS
120 #define CONFIG_CMD_PART
126 #define CONFIG_SPL_FRAMEWORK
128 #define CONFIG_SPL_TEXT_BASE 0x40200000
129 #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
130 CONFIG_SPL_TEXT_BASE)
131 #define CONFIG_SPL_BSS_START_ADDR 0x80000000
132 #define CONFIG_SPL_BSS_MAX_SIZE (512 * 1024)
133 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000
134 #define CONFIG_SYS_SPL_MALLOC_SIZE (1024 * 1024)
135 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
137 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
138 #define CONFIG_SPL_BOARD_INIT
140 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 2
142 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
143 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
145 #define CONFIG_AUTO_COMPLETE
147 #define CONFIG_SYS_LONGHELP
149 #define CONFIG_SYS_MAXARGS 16
150 #define CONFIG_SYS_CBSIZE 512
151 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \
158 #ifdef CONFIG_SPL_BUILD
159 #define CONFIG_SYS_NS16550_SERIAL
160 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
163 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
164 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
165 #define CONFIG_CONS_INDEX 3
167 #define CONFIG_BAUDRATE 115200
168 #define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, \
175 #define CONFIG_USB_MUSB_PIO_ONLY
176 #define CONFIG_USB_MUSB_OMAP2PLUS
177 #define CONFIG_TWL4030_USB
183 #define CONFIG_USB_FUNCTION_FASTBOOT
185 #define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
186 #define CONFIG_FASTBOOT_BUF_SIZE 0x2000000
188 #define CONFIG_FASTBOOT_FLASH
189 #define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
191 #define CONFIG_CMD_FASTBOOT
197 #define CONFIG_ENV_SIZE (128 * 1024)
198 #define CONFIG_ENV_IS_NOWHERE
200 #define CONFIG_ENV_OVERWRITE
202 #define CONFIG_EXTRA_ENV_SETTINGS \
203 "kernel_addr_r=0x82000000\0" \
204 "loadaddr=0x82000000\0" \
205 "fdt_addr_r=0x88000000\0" \
206 "fdtaddr=0x88000000\0" \
207 "ramdisk_addr_r=0x88080000\0" \
208 "pxefile_addr_r=0x80100000\0" \
209 "scriptaddr=0x80000000\0" \
210 "bootm_size=0x10000000\0" \
212 "kernel_mmc_part=3\0" \
213 "recovery_mmc_part=4\0" \
214 "fdtfile=omap3-sniper.dtb\0" \
215 "bootfile=/boot/extlinux/extlinux.conf\0" \
216 "bootargs=console=ttyO2,115200 vram=5M,0x9FA00000 omapfb.vram=0:5M\0"
222 #define CONFIG_SETUP_MEMORY_TAGS
223 #define CONFIG_CMDLINE_TAG
224 #define CONFIG_INITRD_TAG
225 #define CONFIG_REVISION_TAG
226 #define CONFIG_SERIAL_TAG
232 #define CONFIG_SYS_LOAD_ADDR 0x82000000
234 #define CONFIG_ANDROID_BOOT_IMAGE
236 #define CONFIG_BOOTCOMMAND \
237 "setenv boot_mmc_part ${kernel_mmc_part}; " \
238 "if test reboot-${reboot-mode} = reboot-r; then " \
239 "echo recovery; setenv boot_mmc_part ${recovery_mmc_part}; fi; " \
240 "if test reboot-${reboot-mode} = reboot-b; then " \
241 "echo fastboot; fastboot 0; fi; " \
242 "part start mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_start; " \
243 "part size mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_size; " \
244 "mmc dev ${boot_mmc_dev}; " \
245 "mmc read ${kernel_addr_r} ${boot_mmc_start} ${boot_mmc_size} && " \
246 "bootm ${kernel_addr_r};"
252 #include <config_defaults.h>
253 #include <config_distro_defaults.h>