]> git.sur5r.net Git - u-boot/blob - include/configs/spear-common.h
Merge branch 'master' of git://git.denx.de/u-boot-uniphier
[u-boot] / include / configs / spear-common.h
1 /*
2  * (C) Copyright 2009
3  * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 #ifndef _SPEAR_COMMON_H
9 #define _SPEAR_COMMON_H
10 /*
11  * Common configurations used for both spear3xx as well as spear6xx
12  */
13
14 /* U-Boot Load Address */
15 #define CONFIG_SYS_TEXT_BASE                    0x00700000
16
17 /* Ethernet driver configuration */
18 #define CONFIG_MII
19 #define CONFIG_PHY_RESET_DELAY                  10000           /* in usec */
20 #define CONFIG_PHY_GIGE                 /* Include GbE speed/duplex detection */
21
22 /* USBD driver configuration */
23 #if defined(CONFIG_SPEAR_USBTTY)
24 #define CONFIG_DW_UDC
25 #define CONFIG_USB_DEVICE
26 #define CONFIG_USBD_HS
27 #define CONFIG_USB_TTY
28
29 #define CONFIG_USBD_PRODUCT_NAME                "SPEAr SoC"
30 #define CONFIG_USBD_MANUFACTURER                "ST Microelectronics"
31
32 #endif
33
34 #define CONFIG_EXTRA_ENV_USBTTY                 "usbtty=cdc_acm\0"
35
36 /* I2C driver configuration */
37 #define CONFIG_SYS_I2C
38 #if defined(CONFIG_SPEAR600)
39 #define CONFIG_SYS_I2C_BASE                     0xD0200000
40 #elif defined(CONFIG_SPEAR300)
41 #define CONFIG_SYS_I2C_BASE                     0xD0180000
42 #elif defined(CONFIG_SPEAR310)
43 #define CONFIG_SYS_I2C_BASE                     0xD0180000
44 #elif defined(CONFIG_SPEAR320)
45 #define CONFIG_SYS_I2C_BASE                     0xD0180000
46 #endif
47 #define CONFIG_SYS_I2C_SPEED                    400000
48 #define CONFIG_SYS_I2C_SLAVE                    0x02
49
50 #define CONFIG_I2C_CHIPADDRESS                  0x50
51
52 /* Timer, HZ specific defines */
53
54 /* Flash configuration */
55 #if defined(CONFIG_FLASH_PNOR)
56 #define CONFIG_SPEAR_EMI
57 #else
58 #define CONFIG_ST_SMI
59 #endif
60
61 #if defined(CONFIG_ST_SMI)
62
63 #define CONFIG_SYS_MAX_FLASH_BANKS              2
64 #define CONFIG_SYS_FLASH_BASE                   0xF8000000
65 #define CONFIG_SYS_CS1_FLASH_BASE               0xF9000000
66 #define CONFIG_SYS_FLASH_BANK_SIZE              0x01000000
67 #define CONFIG_SYS_FLASH_ADDR_BASE              {CONFIG_SYS_FLASH_BASE, \
68                                                 CONFIG_SYS_CS1_FLASH_BASE}
69 #define CONFIG_SYS_MAX_FLASH_SECT               128
70
71 #define CONFIG_SYS_FLASH_ERASE_TOUT             (3 * CONFIG_SYS_HZ)
72 #define CONFIG_SYS_FLASH_WRITE_TOUT             (3 * CONFIG_SYS_HZ)
73
74 #endif
75
76 /*
77  * Serial Configuration (PL011)
78  * CONFIG_PL01x_PORTS is defined in specific files
79  */
80 #define CONFIG_PL011_SERIAL
81 #define CONFIG_PL011_CLOCK                      (48 * 1000 * 1000)
82 #define CONFIG_CONS_INDEX                       0
83 #define CONFIG_BAUDRATE                         115200
84 #define CONFIG_SYS_BAUDRATE_TABLE               { 9600, 19200, 38400, \
85                                                 57600, 115200 }
86
87 #define CONFIG_SYS_LOADS_BAUD_CHANGE
88
89 /* NAND FLASH Configuration */
90 #define CONFIG_SYS_NAND_SELF_INIT
91 #define CONFIG_MTD_DEVICE
92 #define CONFIG_MTD_PARTITIONS
93 #define CONFIG_NAND_FSMC
94 #define CONFIG_SYS_MAX_NAND_DEVICE              1
95 #define CONFIG_SYS_NAND_ONFI_DETECTION
96
97 /*
98  * Command support defines
99  */
100 #define CONFIG_CMD_NAND
101 #define CONFIG_CMD_ENV
102 #define CONFIG_CMD_SAVES
103
104 /*
105  * Default Environment Varible definitions
106  */
107 #define CONFIG_ENV_OVERWRITE
108
109 /*
110  * U-Boot Environment placing definitions.
111  */
112 #if defined(CONFIG_ENV_IS_IN_FLASH)
113 #ifdef CONFIG_ST_SMI
114 /*
115  * Environment is in serial NOR flash
116  */
117 #define CONFIG_SYS_MONITOR_LEN                  0x00040000
118 #define CONFIG_ENV_SECT_SIZE                    0x00010000
119 #define CONFIG_FSMTDBLK                         "/dev/mtdblock3 "
120
121 #define CONFIG_BOOTCOMMAND                      "bootm 0xf8050000"
122
123 #elif defined(CONFIG_SPEAR_EMI)
124 /*
125  * Environment is in parallel NOR flash
126  */
127 #define CONFIG_SYS_MONITOR_LEN                  0x00060000
128 #define CONFIG_ENV_SECT_SIZE                    0x00020000
129 #define CONFIG_FSMTDBLK                         "/dev/mtdblock3 "
130
131 #define CONFIG_BOOTCOMMAND                      "cp.b 0x50080000 0x1600000 " \
132                                                 "0x4C0000; bootm 0x1600000"
133 #endif
134
135 #define CONFIG_ENV_ADDR                         (CONFIG_SYS_FLASH_BASE + \
136                                                 CONFIG_SYS_MONITOR_LEN)
137 #elif defined(CONFIG_ENV_IS_IN_NAND)
138 /*
139  * Environment is in NAND
140  */
141
142 #define CONFIG_ENV_OFFSET                       0x60000
143 #define CONFIG_ENV_RANGE                        0x10000
144 #define CONFIG_FSMTDBLK                         "/dev/mtdblock7 "
145
146 #define CONFIG_BOOTCOMMAND                      "nand read.jffs2 0x1600000 " \
147                                                 "0x80000 0x4C0000; " \
148                                                 "bootm 0x1600000"
149 #endif
150
151 #define CONFIG_BOOTARGS                         "console=ttyAMA0,115200 " \
152                                                 "mem=128M " \
153                                                 "root="CONFIG_FSMTDBLK \
154                                                 "rootfstype=jffs2"
155
156 #define CONFIG_NFSBOOTCOMMAND                                           \
157         "bootp; "                                                       \
158         "setenv bootargs root=/dev/nfs rw "                             \
159         "nfsroot=$(serverip):$(rootpath) "                              \
160         "ip=$(ipaddr):$(serverip):$(gatewayip):"                        \
161                         "$(netmask):$(hostname):$(netdev):off "         \
162                         "console=ttyAMA0,115200 $(othbootargs);"        \
163         "bootm; "
164
165 #define CONFIG_RAMBOOTCOMMAND                                           \
166         "setenv bootargs root=/dev/ram rw "                             \
167                 "console=ttyAMA0,115200 $(othbootargs);"                \
168         CONFIG_BOOTCOMMAND
169
170 #define CONFIG_ENV_SIZE                         0x02000
171 #define CONFIG_SYS_MONITOR_BASE                 CONFIG_SYS_TEXT_BASE
172
173 /* Miscellaneous configurable options */
174 #define CONFIG_ARCH_CPU_INIT
175 #define CONFIG_BOARD_EARLY_INIT_F
176 #define CONFIG_BOOT_PARAMS_ADDR                 0x00000100
177 #define CONFIG_CMDLINE_TAG
178 #define CONFIG_SETUP_MEMORY_TAGS
179 #define CONFIG_MISC_INIT_R
180
181 #define CONFIG_SYS_MEMTEST_START                0x00800000
182 #define CONFIG_SYS_MEMTEST_END                  0x04000000
183 #define CONFIG_SYS_MALLOC_LEN                   (1024*1024)
184 #define CONFIG_SYS_LONGHELP
185 #define CONFIG_CMDLINE_EDITING
186 #define CONFIG_SYS_CBSIZE                       256
187 #define CONFIG_SYS_PBSIZE                       (CONFIG_SYS_CBSIZE + \
188                                                 sizeof(CONFIG_SYS_PROMPT) + 16)
189 #define CONFIG_SYS_MAXARGS                      16
190 #define CONFIG_SYS_BARGSIZE                     CONFIG_SYS_CBSIZE
191 #define CONFIG_SYS_LOAD_ADDR                    0x00800000
192 #define CONFIG_SYS_CONSOLE_INFO_QUIET
193
194 #define CONFIG_SYS_FLASH_EMPTY_INFO
195
196 /* Physical Memory Map */
197 #define CONFIG_NR_DRAM_BANKS                    1
198 #define PHYS_SDRAM_1                            0x00000000
199 #define PHYS_SDRAM_1_MAXSIZE                    0x40000000
200
201 #define CONFIG_SYS_SDRAM_BASE                   PHYS_SDRAM_1
202 #define CONFIG_SYS_INIT_RAM_ADDR                0xD2800000
203 #define CONFIG_SYS_INIT_RAM_SIZE                0x2000
204
205 #define CONFIG_SYS_INIT_SP_OFFSET               \
206         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
207
208 #define CONFIG_SYS_INIT_SP_ADDR                 \
209         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
210
211 #endif