2 * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net>
4 * (C) Copyright 2007-2011
5 * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
6 * Tom Cubie <tangliang@allwinnertech.com>
8 * Configuration settings for the Allwinner sunxi series of boards.
10 * SPDX-License-Identifier: GPL-2.0+
13 #ifndef _SUNXI_COMMON_CONFIG_H
14 #define _SUNXI_COMMON_CONFIG_H
16 #include <linux/stringify.h>
18 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
20 * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the
21 * expense of restricting some features, so the regular machine id values can
24 # define CONFIG_MACH_TYPE_COMPAT_REV 0
27 * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels.
28 * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass
29 * beyond the machine id check.
31 # define CONFIG_MACH_TYPE_COMPAT_REV 1
35 * High Level Configuration Options
37 #define CONFIG_SUNXI /* sunxi family */
38 #ifdef CONFIG_SPL_BUILD
39 #define CONFIG_SYS_THUMB_BUILD /* Thumbs mode to save space in SPL */
42 #include <asm/arch/cpu.h> /* get chip and board defs */
44 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM_SERIAL)
45 # define CONFIG_DW_SERIAL
49 * Display CPU information
51 #define CONFIG_DISPLAY_CPUINFO
53 #define CONFIG_SYS_PROMPT "sunxi# "
55 /* Serial & console */
56 #define CONFIG_SYS_NS16550
57 #define CONFIG_SYS_NS16550_SERIAL
58 /* ns16550 reg in the low bits of cpu reg */
59 #define CONFIG_SYS_NS16550_CLK 24000000
60 #ifndef CONFIG_DM_SERIAL
61 # define CONFIG_SYS_NS16550_REG_SIZE -4
62 # define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE
63 # define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE
64 # define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE
65 # define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE
66 # define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE
70 #define CONFIG_SYS_CACHELINE_SIZE 64
73 * The DRAM Base differs between some models. We cannot use macros for the
74 * CONFIG_FOO defines which contain the DRAM base address since they end
75 * up unexpanded in include/autoconf.mk .
77 * So we have to have this #ifdef #else #endif block for these.
79 #ifdef CONFIG_MACH_SUN9I
80 #define SDRAM_OFFSET(x) 0x2##x
81 #define CONFIG_SYS_SDRAM_BASE 0x20000000
82 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* default load address */
83 #define CONFIG_SYS_TEXT_BASE 0x2a000000
84 #define CONFIG_PRE_CON_BUF_ADDR 0x2f000000
85 #define CONFIG_SYS_SPL_MALLOC_START 0x2ff00000
86 #define CONFIG_SPL_BSS_START_ADDR 0x2ff80000
88 #define SDRAM_OFFSET(x) 0x4##x
89 #define CONFIG_SYS_SDRAM_BASE 0x40000000
90 #define CONFIG_SYS_LOAD_ADDR 0x42000000 /* default load address */
91 #define CONFIG_SYS_TEXT_BASE 0x4a000000
92 #define CONFIG_PRE_CON_BUF_ADDR 0x4f000000
93 #define CONFIG_SYS_SPL_MALLOC_START 0x4ff00000
94 #define CONFIG_SPL_BSS_START_ADDR 0x4ff80000
97 #define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 /* 512 KiB */
98 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 /* 512 KiB */
100 #ifdef CONFIG_MACH_SUN9I
102 * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is
103 * slightly bigger. Note that it is possible to map the first 32 KiB of the
104 * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the
105 * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and
106 * the 1 actually activates the mapping of the first 32 KiB to 0x00000000.
108 #define CONFIG_SYS_INIT_RAM_ADDR 0x10000
109 #define CONFIG_SYS_INIT_RAM_SIZE 0x0a000 /* 40 KiB */
111 #define CONFIG_SYS_INIT_RAM_ADDR 0x0
112 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */
115 #define CONFIG_SYS_INIT_SP_OFFSET \
116 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
117 #define CONFIG_SYS_INIT_SP_ADDR \
118 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
120 #define CONFIG_NR_DRAM_BANKS 1
121 #define PHYS_SDRAM_0 CONFIG_SYS_SDRAM_BASE
122 #define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */
125 #define CONFIG_LIBATA
126 #define CONFIG_SCSI_AHCI
127 #define CONFIG_SCSI_AHCI_PLAT
128 #define CONFIG_SUNXI_AHCI
129 #define CONFIG_SYS_64BIT_LBA
130 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
131 #define CONFIG_SYS_SCSI_MAX_LUN 1
132 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
133 CONFIG_SYS_SCSI_MAX_LUN)
134 #define CONFIG_CMD_SCSI
137 #define CONFIG_SETUP_MEMORY_TAGS
138 #define CONFIG_CMDLINE_TAG
139 #define CONFIG_INITRD_TAG
140 #define CONFIG_SERIAL_TAG
142 #if defined(CONFIG_SPL_NAND_SUNXI)
143 #define CONFIG_SPL_NAND_DRIVERS
144 #define CONFIG_SPL_NAND_SUPPORT
146 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
147 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x008000
153 #if !defined(CONFIG_UART0_PORT_F)
155 #define CONFIG_GENERIC_MMC
156 #define CONFIG_CMD_MMC
157 #define CONFIG_MMC_SUNXI
158 #define CONFIG_MMC_SUNXI_SLOT 0
159 #define CONFIG_ENV_IS_IN_MMC
160 #define CONFIG_SYS_MMC_ENV_DEV 0 /* first detected MMC controller */
163 /* 4MB of malloc() pool */
164 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20))
167 * Miscellaneous configurable options
169 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
170 #define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */
171 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
172 #define CONFIG_SYS_GENERIC_BOARD
174 /* Boot Argument Buffer Size */
175 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
177 /* standalone support */
178 #define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR
181 #define CONFIG_BAUDRATE 115200
183 /* The stack sizes are set up in start.S using the settings below */
184 #define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */
186 /* FLASH and environment organization */
188 #define CONFIG_SYS_NO_FLASH
190 #define CONFIG_SYS_MONITOR_LEN (512 << 10) /* 512 KiB */
191 #define CONFIG_IDENT_STRING " Allwinner Technology"
193 #define CONFIG_ENV_OFFSET (544 << 10) /* (8 + 24 + 512) KiB */
194 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
196 #define CONFIG_FAT_WRITE /* enable write access */
198 #define CONFIG_SPL_FRAMEWORK
199 #define CONFIG_SPL_LIBCOMMON_SUPPORT
200 #define CONFIG_SPL_SERIAL_SUPPORT
201 #define CONFIG_SPL_LIBGENERIC_SUPPORT
203 #define CONFIG_SPL_BOARD_LOAD_IMAGE
205 #define CONFIG_SPL_TEXT_BASE 0x20 /* sram start+header */
206 #define CONFIG_SPL_MAX_SIZE 0x5fe0 /* 24KB on sun4i/sun7i */
208 #define CONFIG_SPL_LIBDISK_SUPPORT
210 #if !defined(CONFIG_UART0_PORT_F)
211 #define CONFIG_SPL_MMC_SUPPORT
214 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds"
216 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 80 /* 40KiB */
217 #define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */
219 /* end of 32 KiB in sram */
220 #define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */
221 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
224 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER
225 #define CONFIG_SPL_I2C_SUPPORT
228 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \
229 defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \
230 defined CONFIG_I2C4_ENABLE
231 #define CONFIG_SYS_I2C
232 #define CONFIG_SYS_I2C_MVTWSI
233 #define CONFIG_SYS_I2C_SPEED 400000
234 #define CONFIG_SYS_I2C_SLAVE 0x7f
235 #define CONFIG_CMD_I2C
238 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
239 #define CONFIG_SYS_I2C_SOFT
240 #define CONFIG_SYS_I2C_SOFT_SPEED 50000
241 #define CONFIG_SYS_I2C_SOFT_SLAVE 0x00
242 /* We use pin names in Kconfig and sunxi_name_to_gpio() */
243 #define CONFIG_SOFT_I2C_GPIO_SDA soft_i2c_gpio_sda
244 #define CONFIG_SOFT_I2C_GPIO_SCL soft_i2c_gpio_scl
246 extern int soft_i2c_gpio_sda;
247 extern int soft_i2c_gpio_scl;
249 #define CONFIG_VIDEO_LCD_I2C_BUS 0 /* The lcd panel soft i2c is bus 0 */
250 #define CONFIG_SYS_SPD_BUS_NUM 1 /* And the axp209 i2c bus is bus 1 */
252 #define CONFIG_SYS_SPD_BUS_NUM 0 /* The axp209 i2c bus is bus 0 */
253 #define CONFIG_VIDEO_LCD_I2C_BUS -1 /* NA, but necessary to compile */
257 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || defined CONFIG_AXP221_POWER
258 #define CONFIG_SPL_POWER_SUPPORT
261 #ifndef CONFIG_CONS_INDEX
262 #define CONFIG_CONS_INDEX 1 /* UART0 */
265 #if CONFIG_CONS_INDEX == 1
266 #ifdef CONFIG_MACH_SUN9I
267 #define OF_STDOUT_PATH "/soc/serial@07000000:115200"
269 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28000:115200"
271 #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
272 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28400:115200"
273 #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I)
274 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28800:115200"
275 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
276 #define OF_STDOUT_PATH "/soc@01c00000/serial@01f02800:115200"
278 #error Unsupported console port nr. Please fix stdout-path in sunxi-common.h.
282 #define CONFIG_SUNXI_GPIO
283 #define CONFIG_SPL_GPIO_SUPPORT
284 #define CONFIG_CMD_GPIO
288 * The amount of RAM to keep free at the top of RAM when relocating u-boot,
289 * to use as framebuffer. This must be a multiple of 4096.
291 #define CONFIG_SUNXI_MAX_FB_SIZE (9 << 20)
293 /* Do we want to initialize a simple FB? */
294 #define CONFIG_VIDEO_DT_SIMPLEFB
296 #define CONFIG_VIDEO_SUNXI
298 #define CONFIG_CFB_CONSOLE
299 #define CONFIG_VIDEO_SW_CURSOR
300 #define CONFIG_VIDEO_LOGO
301 #define CONFIG_VIDEO_STD_TIMINGS
302 #define CONFIG_I2C_EDID
304 /* allow both serial and cfb console. */
305 #define CONFIG_CONSOLE_MUX
306 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */
307 #define CONFIG_VGA_AS_SINGLE_DEVICE
309 /* To be able to hook simplefb into dt */
310 #ifdef CONFIG_VIDEO_DT_SIMPLEFB
311 #define CONFIG_OF_BOARD_SETUP
314 #endif /* CONFIG_VIDEO */
316 /* Ethernet support */
317 #ifdef CONFIG_SUNXI_EMAC
318 #define CONFIG_PHY_ADDR 1
319 #define CONFIG_MII /* MII PHY management */
320 #define CONFIG_PHYLIB
323 #ifdef CONFIG_SUNXI_GMAC
324 #define CONFIG_DW_AUTONEG
325 #define CONFIG_PHY_GIGE /* GMAC can use gigabit PHY */
326 #define CONFIG_PHY_ADDR 1
327 #define CONFIG_MII /* MII PHY management */
328 #define CONFIG_PHYLIB
331 #ifdef CONFIG_USB_EHCI_HCD
332 #define CONFIG_USB_OHCI_NEW
333 #define CONFIG_USB_OHCI_SUNXI
334 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
335 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
338 #ifdef CONFIG_USB_MUSB_SUNXI
339 #define CONFIG_USB_MUSB_PIO_ONLY
342 #ifdef CONFIG_USB_MUSB_GADGET
343 #define CONFIG_USB_GADGET
344 #define CONFIG_USB_GADGET_DUALSPEED
345 #define CONFIG_USB_GADGET_VBUS_DRAW 0
347 #define CONFIG_USB_GADGET_DOWNLOAD
348 #define CONFIG_USB_FUNCTION_FASTBOOT
349 #define CONFIG_USB_FUNCTION_MASS_STORAGE
352 #ifdef CONFIG_USB_GADGET_DOWNLOAD
353 #define CONFIG_G_DNL_VENDOR_NUM 0x1f3a
354 #define CONFIG_G_DNL_PRODUCT_NUM 0x1010
355 #define CONFIG_G_DNL_MANUFACTURER "Allwinner Technology"
358 #ifdef CONFIG_USB_FUNCTION_FASTBOOT
359 #define CONFIG_CMD_FASTBOOT
360 #define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
361 #define CONFIG_FASTBOOT_BUF_SIZE 0x2000000
363 #define CONFIG_FASTBOOT_FLASH
364 #define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
365 #define CONFIG_EFI_PARTITION
368 #ifdef CONFIG_USB_FUNCTION_MASS_STORAGE
369 #define CONFIG_CMD_USB_MASS_STORAGE
372 #ifdef CONFIG_USB_KEYBOARD
373 #define CONFIG_CONSOLE_MUX
374 #define CONFIG_PREBOOT
375 #define CONFIG_SYS_STDIO_DEREGISTER
376 #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
379 #if !defined CONFIG_ENV_IS_IN_MMC && \
380 !defined CONFIG_ENV_IS_IN_NAND && \
381 !defined CONFIG_ENV_IS_IN_FAT && \
382 !defined CONFIG_ENV_IS_IN_SPI_FLASH
383 #define CONFIG_ENV_IS_NOWHERE
386 #define CONFIG_MISC_INIT_R
387 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
389 #ifndef CONFIG_SPL_BUILD
390 #include <config_distro_defaults.h>
392 /* Enable pre-console buffer to get complete log on the VGA console */
393 #define CONFIG_PRE_CONSOLE_BUFFER
394 #define CONFIG_PRE_CON_BUF_SZ 4096 /* Aprox 2 80*25 screens */
397 * 240M RAM (256M minimum minus space for the framebuffer),
398 * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
399 * 1M script, 1M pxe and the ramdisk at the end.
401 #define MEM_LAYOUT_ENV_SETTINGS \
402 "bootm_size=0xf000000\0" \
403 "kernel_addr_r=" __stringify(SDRAM_OFFSET(2000000)) "\0" \
404 "fdt_addr_r=" __stringify(SDRAM_OFFSET(3000000)) "\0" \
405 "scriptaddr=" __stringify(SDRAM_OFFSET(3100000)) "\0" \
406 "pxefile_addr_r=" __stringify(SDRAM_OFFSET(3200000)) "\0" \
407 "ramdisk_addr_r=" __stringify(SDRAM_OFFSET(3300000)) "\0"
410 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
412 #define BOOT_TARGET_DEVICES_MMC(func)
416 #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
418 #define BOOT_TARGET_DEVICES_SCSI(func)
421 #ifdef CONFIG_USB_STORAGE
422 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
424 #define BOOT_TARGET_DEVICES_USB(func)
427 #define BOOT_TARGET_DEVICES(func) \
428 BOOT_TARGET_DEVICES_MMC(func) \
429 BOOT_TARGET_DEVICES_SCSI(func) \
430 BOOT_TARGET_DEVICES_USB(func) \
434 #include <config_distro_bootcmd.h>
436 #ifdef CONFIG_USB_KEYBOARD
437 #define CONSOLE_STDIN_SETTINGS \
438 "preboot=usb start\0" \
439 "stdin=serial,usbkbd\0"
441 #define CONSOLE_STDIN_SETTINGS \
446 #define CONSOLE_STDOUT_SETTINGS \
447 "stdout=serial,vga\0" \
448 "stderr=serial,vga\0"
450 #define CONSOLE_STDOUT_SETTINGS \
455 #define CONSOLE_ENV_SETTINGS \
456 CONSOLE_STDIN_SETTINGS \
457 CONSOLE_STDOUT_SETTINGS
459 #define CONFIG_EXTRA_ENV_SETTINGS \
460 CONSOLE_ENV_SETTINGS \
461 MEM_LAYOUT_ENV_SETTINGS \
462 "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
463 "console=ttyS0,115200\0" \
466 #else /* ifndef CONFIG_SPL_BUILD */
467 #define CONFIG_EXTRA_ENV_SETTINGS
470 #endif /* _SUNXI_COMMON_CONFIG_H */