git.sur5r.net Git - u-boot/blob - include/configs/t4qds.h

   1 /*
   2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 /*
  24  * Corenet DS style board configuration file
  25  */
  26 #ifndef __CONFIG_H
  27 #define __CONFIG_H
  28
  29 #ifdef CONFIG_RAMBOOT_PBL
  30 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  31 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  32 #endif
  33
  34 #define CONFIG_CMD_REGINFO
  35
  36 /* High Level Configuration Options */
  37 #define CONFIG_BOOKE
  38 #define CONFIG_E6500
  39 #define CONFIG_E500                     /* BOOKE e500 family */
  40 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  41 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  42 #define CONFIG_MPC85xx                  /* MPC85xx/PQ3 platform */
  43 #define CONFIG_FSL_CORENET              /* Freescale CoreNet platform */
  44 #define CONFIG_MP                       /* support multiple processors */
  45
  46 #ifndef CONFIG_SYS_TEXT_BASE
  47 #define CONFIG_SYS_TEXT_BASE    0xeff80000
  48 #endif
  49
  50 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  51 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  52 #endif
  53
  54 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  55 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  56 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  57 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  58 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  59 #define CONFIG_PCIE2                    /* PCIE controler 2 */
  60 #define CONFIG_PCIE3                    /* PCIE controler 3 */
  61 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  62 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  63
  64 #define CONFIG_SYS_SRIO
  65 #define CONFIG_SRIO1                    /* SRIO port 1 */
  66 #define CONFIG_SRIO2                    /* SRIO port 2 */
  67
  68 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  69
  70 #define CONFIG_ENV_OVERWRITE
  71
  72 #ifdef CONFIG_SYS_NO_FLASH
  73 #define CONFIG_ENV_IS_NOWHERE
  74 #else
  75 #define CONFIG_FLASH_CFI_DRIVER
  76 #define CONFIG_SYS_FLASH_CFI
  77 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  78 #endif
  79
  80 #ifndef CONFIG_SYS_NO_FLASH
  81 #if defined(CONFIG_SPIFLASH)
  82 #define CONFIG_SYS_EXTRA_ENV_RELOC
  83 #define CONFIG_ENV_IS_IN_SPI_FLASH
  84 #define CONFIG_ENV_SPI_BUS              0
  85 #define CONFIG_ENV_SPI_CS               0
  86 #define CONFIG_ENV_SPI_MAX_HZ           10000000
  87 #define CONFIG_ENV_SPI_MODE             0
  88 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  89 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  90 #define CONFIG_ENV_SECT_SIZE            0x10000
  91 #elif defined(CONFIG_SDCARD)
  92 #define CONFIG_SYS_EXTRA_ENV_RELOC
  93 #define CONFIG_ENV_IS_IN_MMC
  94 #define CONFIG_SYS_MMC_ENV_DEV          0
  95 #define CONFIG_ENV_SIZE                 0x2000
  96 #define CONFIG_ENV_OFFSET               (512 * 1097)
  97 #elif defined(CONFIG_NAND)
  98 #define CONFIG_SYS_EXTRA_ENV_RELOC
  99 #define CONFIG_ENV_IS_IN_NAND
 100 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
 101 #define CONFIG_ENV_OFFSET               (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 102 #else
 103 #define CONFIG_ENV_IS_IN_FLASH
 104 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 105 #define CONFIG_ENV_SIZE         0x2000
 106 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 107 #endif
 108 #else /* CONFIG_SYS_NO_FLASH */
 109 #define CONFIG_ENV_SIZE                0x2000
 110 #define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
 111 #endif
 112
 113
 114
 115 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
 116 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 117
 118 #ifndef __ASSEMBLY__
 119 unsigned long get_board_sys_clk(void);
 120 unsigned long get_board_ddr_clk(void);
 121 #endif
 122
 123 /*
 124  * These can be toggled for performance analysis, otherwise use default.
 125  */
 126 #define CONFIG_SYS_CACHE_STASHING
 127 #define CONFIG_BTB                      /* toggle branch predition */
 128 #define CONFIG_DDR_ECC
 129 #ifdef CONFIG_DDR_ECC
 130 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 131 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 132 #endif
 133
 134 #define CONFIG_ENABLE_36BIT_PHYS
 135
 136 #ifdef CONFIG_PHYS_64BIT
 137 #define CONFIG_ADDR_MAP
 138 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 139 #endif
 140
 141 #if 0
 142 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 143 #endif
 144 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 145 #define CONFIG_SYS_MEMTEST_END          0x00400000
 146 #define CONFIG_SYS_ALT_MEMTEST
 147 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 148
 149 /*
 150  *  Config the L3 Cache as L3 SRAM
 151  */
 152 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
 153
 154 #ifdef CONFIG_PHYS_64BIT
 155 #define CONFIG_SYS_DCSRBAR              0xf0000000
 156 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 157 #endif
 158
 159 /* EEPROM */
 160 #define CONFIG_ID_EEPROM
 161 #define CONFIG_SYS_I2C_EEPROM_NXID
 162 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 163 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 164 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 165
 166 /*
 167  * DDR Setup
 168  */
 169 #define CONFIG_VERY_BIG_RAM
 170 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 171 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 172
 173 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 174 #define CONFIG_DIMM_SLOTS_PER_CTLR      2
 175 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
 176 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 177
 178 #define CONFIG_DDR_SPD
 179 #define CONFIG_FSL_DDR3
 180
 181 #define CONFIG_SYS_SPD_BUS_NUM  0
 182 #define SPD_EEPROM_ADDRESS1     0x51
 183 #define SPD_EEPROM_ADDRESS2     0x52
 184 #define SPD_EEPROM_ADDRESS3     0x53
 185 #define SPD_EEPROM_ADDRESS4     0x54
 186 #define SPD_EEPROM_ADDRESS5     0x55
 187 #define SPD_EEPROM_ADDRESS6     0x56
 188 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 189 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 190
 191 /*
 192  * IFC Definitions
 193  */
 194 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 195 #ifdef CONFIG_PHYS_64BIT
 196 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 197 #else
 198 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 199 #endif
 200
 201 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 202 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 203                                 + 0x8000000) | \
 204                                 CSPR_PORT_SIZE_16 | \
 205                                 CSPR_MSEL_NOR | \
 206                                 CSPR_V)
 207 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 208 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 209                                 CSPR_PORT_SIZE_16 | \
 210                                 CSPR_MSEL_NOR | \
 211                                 CSPR_V)
 212 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 213 /* NOR Flash Timing Params */
 214 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 215
 216 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 217                                 FTIM0_NOR_TEADC(0x5) | \
 218                                 FTIM0_NOR_TEAHC(0x5))
 219 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 220                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 221                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 222 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 223                                 FTIM2_NOR_TCH(0x4) | \
 224                                 FTIM2_NOR_TWPH(0x0E) | \
 225                                 FTIM2_NOR_TWP(0x1c))
 226 #define CONFIG_SYS_NOR_FTIM3    0x0
 227
 228 #define CONFIG_SYS_FLASH_QUIET_TEST
 229 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 230
 231 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 232 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 233 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 234 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 235
 236 #define CONFIG_SYS_FLASH_EMPTY_INFO
 237 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 238                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 239
 240 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 241 #define QIXIS_BASE                      0xffdf0000
 242 #define QIXIS_LBMAP_SWITCH              6
 243 #define QIXIS_LBMAP_MASK                0x0f
 244 #define QIXIS_LBMAP_SHIFT               0
 245 #define QIXIS_LBMAP_DFLTBANK            0x00
 246 #define QIXIS_LBMAP_ALTBANK             0x04
 247 #define QIXIS_RST_CTL_RESET             0x83
 248 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 249 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 250 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 251 #ifdef CONFIG_PHYS_64BIT
 252 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 253 #else
 254 #define QIXIS_BASE_PHYS         QIXIS_BASE
 255 #endif
 256
 257 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 258 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 259                                 | CSPR_PORT_SIZE_8 \
 260                                 | CSPR_MSEL_GPCM \
 261                                 | CSPR_V)
 262 #define CONFIG_SYS_AMASK3       IFC_AMASK(4 * 1024)
 263 #define CONFIG_SYS_CSOR3        0x0
 264 /* QIXIS Timing parameters for IFC CS3 */
 265 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 266                                         FTIM0_GPCM_TEADC(0x0e) | \
 267                                         FTIM0_GPCM_TEAHC(0x0e))
 268 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 269                                         FTIM1_GPCM_TRAD(0x3f))
 270 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 271                                         FTIM2_GPCM_TCH(0x0) | \
 272                                         FTIM2_GPCM_TWP(0x1f))
 273 #define CONFIG_SYS_CS3_FTIM3            0x0
 274
 275 /* NAND Flash on IFC */
 276 #define CONFIG_NAND_FSL_IFC
 277 #define CONFIG_SYS_NAND_BASE            0xff800000
 278 #ifdef CONFIG_PHYS_64BIT
 279 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 280 #else
 281 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 282 #endif
 283
 284 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 285 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 286                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 287                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 288                                 | CSPR_V)
 289 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 290
 291 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 292                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 293                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 294                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 295                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 296                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 297                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 298
 299 #define CONFIG_SYS_NAND_ONFI_DETECTION
 300
 301 /* ONFI NAND Flash mode0 Timing Params */
 302 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 303                                         FTIM0_NAND_TWP(0x18)   | \
 304                                         FTIM0_NAND_TWCHT(0x07) | \
 305                                         FTIM0_NAND_TWH(0x0a))
 306 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 307                                         FTIM1_NAND_TWBE(0x39)  | \
 308                                         FTIM1_NAND_TRR(0x0e)   | \
 309                                         FTIM1_NAND_TRP(0x18))
 310 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 311                                         FTIM2_NAND_TREH(0x0a) | \
 312                                         FTIM2_NAND_TWHRE(0x1e))
 313 #define CONFIG_SYS_NAND_FTIM3           0x0
 314
 315 #define CONFIG_SYS_NAND_DDR_LAW         11
 316
 317 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 318 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 319 #define CONFIG_MTD_NAND_VERIFY_WRITE
 320 #define CONFIG_CMD_NAND
 321
 322 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 323
 324 #if defined(CONFIG_NAND)
 325 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 326 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 327 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 328 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 329 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 330 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 331 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 332 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 333 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 334 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 335 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 336 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 337 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 338 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 339 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 340 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 341 #else
 342 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 343 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 344 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 345 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 346 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 347 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 348 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 349 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 350 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 351 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 352 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 353 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 354 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 355 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 356 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 357 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 358 #endif
 359 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 360 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 361 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 362 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 363 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 364 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 365 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 366 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 367
 368 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 369
 370 #if defined(CONFIG_RAMBOOT_PBL)
 371 #define CONFIG_SYS_RAMBOOT
 372 #endif
 373
 374 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 375 #define CONFIG_MISC_INIT_R
 376
 377 #define CONFIG_HWCONFIG
 378
 379 /* define to use L1 as initial stack */
 380 #define CONFIG_L1_INIT_RAM
 381 #define CONFIG_SYS_INIT_RAM_LOCK
 382 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 383 #ifdef CONFIG_PHYS_64BIT
 384 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 385 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
 386 /* The assembler doesn't like typecast */
 387 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 388         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 389           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 390 #else
 391 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe0ec000 /* Initial L1 address */
 392 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 393 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 394 #endif
 395 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 396
 397 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 398                                         GENERATED_GBL_DATA_SIZE)
 399 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 400
 401 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 402 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 403
 404 /* Serial Port - controlled on board with jumper J8
 405  * open - index 2
 406  * shorted - index 1
 407  */
 408 #define CONFIG_CONS_INDEX       1
 409 #define CONFIG_SYS_NS16550
 410 #define CONFIG_SYS_NS16550_SERIAL
 411 #define CONFIG_SYS_NS16550_REG_SIZE     1
 412 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 413
 414 #define CONFIG_SYS_BAUDRATE_TABLE       \
 415         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 416
 417 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 418 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 419 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 420 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 421
 422 /* Use the HUSH parser */
 423 #define CONFIG_SYS_HUSH_PARSER
 424 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 425
 426 /* pass open firmware flat tree */
 427 #define CONFIG_OF_LIBFDT
 428 #define CONFIG_OF_BOARD_SETUP
 429 #define CONFIG_OF_STDOUT_VIA_ALIAS
 430
 431 /* new uImage format support */
 432 #define CONFIG_FIT
 433 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 434
 435 /* I2C */
 436 #define CONFIG_FSL_I2C          /* Use FSL common I2C driver */
 437 #define CONFIG_HARD_I2C         /* I2C with hardware support */
 438 #define CONFIG_I2C_MULTI_BUS
 439 #define CONFIG_I2C_CMD_TREE
 440 #define CONFIG_SYS_I2C_SPEED            100000  /* I2C speed */
 441 #define CONFIG_SYS_I2C_SLAVE            0x7F
 442 #define CONFIG_SYS_I2C_OFFSET           0x118000
 443 #define CONFIG_SYS_I2C2_OFFSET          0x118100
 444 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
 445 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
 446
 447 #define I2C_MUX_CH_DEFAULT      0x8
 448 #define I2C_MUX_CH_VOL_MONITOR  0xa
 449 #define I2C_MUX_CH_VSC3316_FS   0xc
 450 #define I2C_MUX_CH_VSC3316_BS   0xd
 451
 452 /* Voltage monitor on channel 2*/
 453 #define I2C_VOL_MONITOR_ADDR            0x40
 454 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 455 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 456 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 457
 458 /* VSC Crossbar switches */
 459 #define CONFIG_VSC_CROSSBAR
 460 #define VSC3316_FSM_TX_ADDR     0x70
 461 #define VSC3316_FSM_RX_ADDR     0x71
 462
 463 /*
 464  * RapidIO
 465  */
 466 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 467 #ifdef CONFIG_PHYS_64BIT
 468 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 469 #else
 470 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 471 #endif
 472 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 473
 474 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 475 #ifdef CONFIG_PHYS_64BIT
 476 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 477 #else
 478 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 479 #endif
 480 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 481
 482 /*
 483  * for slave u-boot IMAGE instored in master memory space,
 484  * PHYS must be aligned based on the SIZE
 485  */
 486 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull
 487 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull
 488 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000        /* 512K */
 489 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull
 490 /*
 491  * for slave UCODE and ENV instored in master memory space,
 492  * PHYS must be aligned based on the SIZE
 493  */
 494 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull
 495 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 496 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 497
 498 /* slave core release by master*/
 499 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 500 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 501
 502 /*
 503  * SRIO_PCIE_BOOT - SLAVE
 504  */
 505 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 506 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 507 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 508                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 509 #endif
 510 /*
 511  * eSPI - Enhanced SPI
 512  */
 513 #define CONFIG_FSL_ESPI
 514 #define CONFIG_SPI_FLASH
 515 #define CONFIG_SPI_FLASH_SST
 516 #define CONFIG_CMD_SF
 517 #define CONFIG_SF_DEFAULT_SPEED         10000000
 518 #define CONFIG_SF_DEFAULT_MODE          0
 519
 520 /*
 521  * General PCI
 522  * Memory space is mapped 1-1, but I/O space must start from 0.
 523  */
 524
 525 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 526 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 527 #ifdef CONFIG_PHYS_64BIT
 528 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 529 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 530 #else
 531 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 532 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 533 #endif
 534 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 535 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 536 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 537 #ifdef CONFIG_PHYS_64BIT
 538 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 539 #else
 540 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 541 #endif
 542 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 543
 544 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 545 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 546 #ifdef CONFIG_PHYS_64BIT
 547 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 548 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 549 #else
 550 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 551 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 552 #endif
 553 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 554 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 555 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 556 #ifdef CONFIG_PHYS_64BIT
 557 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 558 #else
 559 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 560 #endif
 561 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 562
 563 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 564 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 565 #ifdef CONFIG_PHYS_64BIT
 566 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 567 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 568 #else
 569 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
 570 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
 571 #endif
 572 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 573 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 574 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 575 #ifdef CONFIG_PHYS_64BIT
 576 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 577 #else
 578 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 579 #endif
 580 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 581
 582 /* controller 4, Base address 203000 */
 583 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 584 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 585 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 586 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 587 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 588 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 589
 590 /* Qman/Bman */
 591 #ifndef CONFIG_NOBQFMAN
 592 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 593 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
 594 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 595 #ifdef CONFIG_PHYS_64BIT
 596 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 597 #else
 598 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 599 #endif
 600 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 601 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
 602 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 603 #ifdef CONFIG_PHYS_64BIT
 604 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 605 #else
 606 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 607 #endif
 608 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 609
 610 #define CONFIG_SYS_DPAA_FMAN
 611 #define CONFIG_SYS_DPAA_PME
 612 #define CONFIG_SYS_PMAN
 613 #define CONFIG_SYS_DPAA_DCE
 614 #define CONFIG_SYS_INTERLAKEN
 615
 616 /* Default address of microcode for the Linux Fman driver */
 617 #if defined(CONFIG_SPIFLASH)
 618 /*
 619  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 620  * env, so we got 0x110000.
 621  */
 622 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 623 #define CONFIG_SYS_QE_FMAN_FW_ADDR      0x110000
 624 #elif defined(CONFIG_SDCARD)
 625 /*
 626  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 627  * about 545KB (1089 blocks), Env is stored after the image, and the env size is
 628  * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
 629  */
 630 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 631 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (512 * 1130)
 632 #elif defined(CONFIG_NAND)
 633 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 634 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (6 * CONFIG_SYS_NAND_BLOCK_SIZE)
 635 #else
 636 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 637 #define CONFIG_SYS_QE_FMAN_FW_ADDR              0xEFF40000
 638 #endif
 639 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 640 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 641 #endif /* CONFIG_NOBQFMAN */
 642
 643 #ifdef CONFIG_SYS_DPAA_FMAN
 644 #define CONFIG_FMAN_ENET
 645 #define CONFIG_PHYLIB_10G
 646 #define CONFIG_PHY_VITESSE
 647 #define CONFIG_PHY_TERANETICS
 648 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 649 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
 650 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 651 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 652 #define XFI_CARD_PORT1_PHY_ADDR 0x1 /* tmp, FIXME below addr */
 653 #define XFI_CARD_PORT2_PHY_ADDR 0x2
 654 #define XFI_CARD_PORT3_PHY_ADDR 0x3
 655 #define XFI_CARD_PORT4_PHY_ADDR 0x4
 656 #define QSGMII_CARD_PHY_ADDR    0x5
 657 #define FM1_10GEC1_PHY_ADDR     0x0
 658 #define FM1_10GEC2_PHY_ADDR     0x1
 659 #define FM2_10GEC1_PHY_ADDR     0x2
 660 #define FM2_10GEC2_PHY_ADDR     0x3
 661 #endif
 662
 663 #ifdef CONFIG_PCI
 664 #define CONFIG_NET_MULTI
 665 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 666 #define CONFIG_E1000
 667
 668 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 669 #define CONFIG_DOS_PARTITION
 670 #endif  /* CONFIG_PCI */
 671
 672 /* SATA */
 673 #ifdef CONFIG_FSL_SATA_V2
 674 #define CONFIG_LIBATA
 675 #define CONFIG_FSL_SATA
 676
 677 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 678 #define CONFIG_SATA1
 679 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 680 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 681 #define CONFIG_SATA2
 682 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 683 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 684
 685 #define CONFIG_LBA48
 686 #define CONFIG_CMD_SATA
 687 #define CONFIG_DOS_PARTITION
 688 #define CONFIG_CMD_EXT2
 689 #endif
 690
 691 #ifdef CONFIG_FMAN_ENET
 692 #define CONFIG_MII              /* MII PHY management */
 693 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 694 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 695 #endif
 696
 697 /*
 698  * Environment
 699  */
 700 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 701 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 702
 703 /*
 704  * Command line configuration.
 705  */
 706 #include <config_cmd_default.h>
 707
 708 #define CONFIG_CMD_DHCP
 709 #define CONFIG_CMD_ELF
 710 #define CONFIG_CMD_ERRATA
 711 #define CONFIG_CMD_GREPENV
 712 #define CONFIG_CMD_IRQ
 713 #define CONFIG_CMD_I2C
 714 #define CONFIG_CMD_MII
 715 #define CONFIG_CMD_PING
 716 #define CONFIG_CMD_SETEXPR
 717
 718 #ifdef CONFIG_PCI
 719 #define CONFIG_CMD_PCI
 720 #define CONFIG_CMD_NET
 721 #endif
 722
 723 /*
 724 * USB
 725 */
 726 #define CONFIG_CMD_USB
 727 #define CONFIG_USB_STORAGE
 728 #define CONFIG_USB_EHCI
 729 #define CONFIG_USB_EHCI_FSL
 730 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 731 #define CONFIG_CMD_EXT2
 732 #define CONFIG_HAS_FSL_DR_USB
 733
 734 #define CONFIG_MMC
 735
 736 #ifdef CONFIG_MMC
 737 #define CONFIG_FSL_ESDHC
 738 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 739 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 740 #define CONFIG_CMD_MMC
 741 #define CONFIG_GENERIC_MMC
 742 #define CONFIG_CMD_EXT2
 743 #define CONFIG_CMD_FAT
 744 #define CONFIG_DOS_PARTITION
 745 #endif
 746
 747 /*
 748  * Miscellaneous configurable options
 749  */
 750 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 751 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 752 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 753 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 754 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 755 #ifdef CONFIG_CMD_KGDB
 756 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 757 #else
 758 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 759 #endif
 760 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 761 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 762 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 763 #define CONFIG_SYS_HZ           1000            /* decrementer freq: 1ms ticks*/
 764
 765 /*
 766  * For booting Linux, the board info and command line data
 767  * have to be in the first 64 MB of memory, since this is
 768  * the maximum mapped by the Linux kernel during initialization.
 769  */
 770 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 771 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 772
 773 #ifdef CONFIG_CMD_KGDB
 774 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 775 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 776 #endif
 777
 778 /*
 779  * Environment Configuration
 780  */
 781 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 782 #define CONFIG_BOOTFILE         "uImage"
 783 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 784
 785 /* default location for tftp and bootm */
 786 #define CONFIG_LOADADDR         1000000
 787
 788 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 789
 790 #define CONFIG_BAUDRATE 115200
 791
 792 #define __USB_PHY_TYPE  utmi
 793
 794 /*
 795  * T4240 has 3 DDR controllers. Default to 3way_4KB interleaving. It can be
 796  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to
 797  * cacheline interleaving. It can be cacheline, page, bank, superbank.
 798  * See doc/README.fsl-ddr for details.
 799  */
 800 #ifdef CONFIG_PPC_T4240
 801 #define CTRL_INTLV_PREFERED 3way_4KB
 802 #else
 803 #define CTRL_INTLV_PREFERED cacheline
 804 #endif
 805
 806 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 807         "hwconfig=fsl_ddr:"                                     \
 808         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 809         "bank_intlv=auto;"                                      \
 810         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 811         "netdev=eth0\0"                                         \
 812         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 813         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"             \
 814         "tftpflash=tftpboot $loadaddr $uboot && "               \
 815         "protect off $ubootaddr +$filesize && "                 \
 816         "erase $ubootaddr +$filesize && "                       \
 817         "cp.b $loadaddr $ubootaddr $filesize && "               \
 818         "protect on $ubootaddr +$filesize && "                  \
 819         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 820         "consoledev=ttyS0\0"                                    \
 821         "ramdiskaddr=2000000\0"                                 \
 822         "ramdiskfile=t4240qds/ramdisk.uboot\0"                  \
 823         "fdtaddr=c00000\0"                                      \
 824         "fdtfile=t4240qds/t4240qds.dtb\0"                               \
 825         "bdev=sda3\0"                                           \
 826         "c=ffe\0"
 827
 828 /* For emulation this causes u-boot to jump to the start of the proof point
 829    app code automatically */
 830 #define CONFIG_PROOF_POINTS                     \
 831  "setenv bootargs root=/dev/$bdev rw "          \
 832  "console=$consoledev,$baudrate $othbootargs;"  \
 833  "cpu 1 release 0x29000000 - - -;"              \
 834  "cpu 2 release 0x29000000 - - -;"              \
 835  "cpu 3 release 0x29000000 - - -;"              \
 836  "cpu 4 release 0x29000000 - - -;"              \
 837  "cpu 5 release 0x29000000 - - -;"              \
 838  "cpu 6 release 0x29000000 - - -;"              \
 839  "cpu 7 release 0x29000000 - - -;"              \
 840  "go 0x29000000"
 841
 842 #define CONFIG_HVBOOT                           \
 843  "setenv bootargs config-addr=0x60000000; "     \
 844  "bootm 0x01000000 - 0x00f00000"
 845
 846 #define CONFIG_ALU                              \
 847  "setenv bootargs root=/dev/$bdev rw "          \
 848  "console=$consoledev,$baudrate $othbootargs;"  \
 849  "cpu 1 release 0x01000000 - - -;"              \
 850  "cpu 2 release 0x01000000 - - -;"              \
 851  "cpu 3 release 0x01000000 - - -;"              \
 852  "cpu 4 release 0x01000000 - - -;"              \
 853  "cpu 5 release 0x01000000 - - -;"              \
 854  "cpu 6 release 0x01000000 - - -;"              \
 855  "cpu 7 release 0x01000000 - - -;"              \
 856  "go 0x01000000"
 857
 858 #define CONFIG_LINUX                            \
 859  "setenv bootargs root=/dev/ram rw "            \
 860  "console=$consoledev,$baudrate $othbootargs;"  \
 861  "setenv ramdiskaddr 0x02000000;"               \
 862  "setenv fdtaddr 0x00c00000;"                   \
 863  "setenv loadaddr 0x1000000;"                   \
 864  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 865
 866 #define CONFIG_HDBOOT                                   \
 867         "setenv bootargs root=/dev/$bdev rw "           \
 868         "console=$consoledev,$baudrate $othbootargs;"   \
 869         "tftp $loadaddr $bootfile;"                     \
 870         "tftp $fdtaddr $fdtfile;"                       \
 871         "bootm $loadaddr - $fdtaddr"
 872
 873 #define CONFIG_NFSBOOTCOMMAND                   \
 874         "setenv bootargs root=/dev/nfs rw "     \
 875         "nfsroot=$serverip:$rootpath "          \
 876         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 877         "console=$consoledev,$baudrate $othbootargs;"   \
 878         "tftp $loadaddr $bootfile;"             \
 879         "tftp $fdtaddr $fdtfile;"               \
 880         "bootm $loadaddr - $fdtaddr"
 881
 882 #define CONFIG_RAMBOOTCOMMAND                           \
 883         "setenv bootargs root=/dev/ram rw "             \
 884         "console=$consoledev,$baudrate $othbootargs;"   \
 885         "tftp $ramdiskaddr $ramdiskfile;"               \
 886         "tftp $loadaddr $bootfile;"                     \
 887         "tftp $fdtaddr $fdtfile;"                       \
 888         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 889
 890 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 891
 892 #ifdef CONFIG_SECURE_BOOT
 893 #include <asm/fsl_secure_boot.h>
 894 #endif
 895
 896 #endif  /* __CONFIG_H */