2 * Configuration settings for the TechNexion TAO-3530 SOM
3 * equipped on Thunder baseboard.
5 * Edward Lin <linuxfae@technexion.com>
6 * Tapani Utriainen <linuxfae@technexion.com>
8 * Copyright (C) 2013 Stefan Roese <sr@denx.de>
10 * SPDX-License-Identifier: GPL-2.0+
17 * High Level Configuration Options
20 #include <asm/arch/cpu.h> /* get chip and board defs */
21 #include <asm/arch/omap.h>
24 #define V_OSCK 26000000 /* Clock output from T2 */
25 #define V_SCLK (V_OSCK >> 1)
27 #define CONFIG_MISC_INIT_R
29 #define CONFIG_CMDLINE_TAG
30 #define CONFIG_SETUP_MEMORY_TAGS
31 #define CONFIG_INITRD_TAG
32 #define CONFIG_REVISION_TAG
35 * Size of malloc() pool
37 #define CONFIG_SYS_MALLOC_LEN (4 << 20)
38 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */
45 * NS16550 Configuration
47 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
49 #define CONFIG_SYS_NS16550_SERIAL
50 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
51 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
54 * select serial console configuration
56 #define CONFIG_CONS_INDEX 3
57 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
59 /* allow to overwrite serial and ethaddr */
60 #define CONFIG_ENV_OVERWRITE
62 /* commands to include */
63 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
65 #define CONFIG_SYS_I2C
66 #define CONFIG_I2C_MULTI_BUS
71 #define CONFIG_TWL4030_LED
76 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
78 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
79 /* to access nand at */
82 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
84 /* Environment information */
86 #define CONFIG_EXTRA_ENV_SETTINGS \
87 "loadaddr=0x82000000\0" \
88 "console=ttyO2,115200n8\0" \
90 "dvi_mode=omapfb.mode=dvi:1280x720-24@60\0" \
91 "tv_mode=omapfb.mode=tv:ntsc\0" \
92 "video_mode=omapdss.def_disp=lcd vram=6M omapfb.vram=0:2M,1:2M,2:2M\0" \
93 "lcd_mode=omapfb.mode=lcd:800x480@60 \0" \
96 "mmcroot=/dev/mmcblk0p2 rw\0" \
97 "mmcrootfstype=ext3 rootwait\0" \
98 "nandroot=ubi0:rootfs ubi.mtd=4\0" \
99 "nandrootfstype=ubifs\0" \
100 "mmcargs=setenv bootargs console=${console} " \
101 "mpurate=${mpurate} " \
104 "rootfstype=${mmcrootfstype} " \
105 "${extra_options}\0" \
106 "nandargs=setenv bootargs console=${console} " \
107 "mpurate=${mpurate} " \
109 "${network_setting} " \
110 "root=${nandroot} " \
111 "rootfstype=${nandrootfstype} "\
112 "${extra_options}\0" \
113 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
114 "bootscript=echo Running bootscript from mmc ...; " \
115 "source ${loadaddr}\0" \
116 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
117 "mmcboot=echo Booting from mmc ...; " \
119 "bootm ${loadaddr}\0" \
120 "nandboot=echo Booting from nand ...; " \
122 "nand read ${loadaddr} 280000 400000; " \
123 "bootm ${loadaddr}\0" \
125 #define CONFIG_BOOTCOMMAND \
126 "if mmc rescan ${mmcdev}; then " \
127 "if run loadbootscript; then " \
130 "if run loaduimage; then " \
132 "else run nandboot; " \
135 "else run nandboot; fi"
138 * Miscellaneous configurable options
140 #define CONFIG_SYS_LONGHELP /* undef to save memory */
142 /* turn on command-line edit/hist/auto */
143 #define CONFIG_CMDLINE_EDITING
144 #define CONFIG_AUTO_COMPLETE
146 #define CONFIG_SYS_ALT_MEMTEST 1
147 #define CONFIG_SYS_MEMTEST_START (0x82000000) /* memtest */
149 #define CONFIG_SYS_MEMTEST_END (0x83FFFFFF) /* 64MB */
150 #define CONFIG_SYS_MEMTEST_SCRATCH (0x81000000) /* dummy address */
152 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */
154 #define CONFIG_SYS_TEXT_BASE 0x80008000
157 * OMAP3 has 12 GP timers, they can be driven by the system clock
158 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
159 * This rate is divided by a local divisor.
161 #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
162 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
165 * Physical Memory Map
167 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
168 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
169 #define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */
170 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
173 * FLASH and environment organization
176 /* **** PISMO SUPPORT *** */
177 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
178 #define CONFIG_SYS_FLASH_BASE NAND_BASE
180 /* Monitor at start of flash */
181 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
182 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
184 #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */
186 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10)
187 #define CONFIG_ENV_OFFSET 0x260000
188 #define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET
190 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
191 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
192 #define CONFIG_SYS_INIT_RAM_SIZE 0x800
193 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
194 CONFIG_SYS_INIT_RAM_SIZE - \
195 GENERATED_GBL_DATA_SIZE)
200 * Currently only EHCI is enabled, the MUSB OTG controller
205 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 162
207 /* Defines for SPL */
208 #define CONFIG_SPL_FRAMEWORK
210 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
211 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
213 #define CONFIG_SPL_NAND_BASE
214 #define CONFIG_SPL_NAND_DRIVERS
215 #define CONFIG_SPL_NAND_ECC
217 /* NAND boot config */
218 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
219 #define CONFIG_SYS_NAND_PAGE_COUNT 64
220 #define CONFIG_SYS_NAND_PAGE_SIZE 2048
221 #define CONFIG_SYS_NAND_OOBSIZE 64
222 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
223 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
225 * Use the ECC/OOB layout from omap_gpmc.h that matches your chip:
226 * SP vs LP, 8bit vs 16bit: GPMC_NAND_HW_ECC_LAYOUT
228 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
230 #define CONFIG_SYS_NAND_ECCSIZE 512
231 #define CONFIG_SYS_NAND_ECCBYTES 3
232 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
234 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
235 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
237 #define CONFIG_SPL_TEXT_BASE 0x40200800
238 #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
239 CONFIG_SPL_TEXT_BASE)
242 * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the
243 * older x-loader implementations. And move the BSS area so that it
244 * doesn't overlap with TEXT_BASE.
246 #define CONFIG_SYS_TEXT_BASE 0x80008000
247 #define CONFIG_SPL_BSS_START_ADDR 0x80100000
248 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
250 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000
251 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
253 #endif /* __CONFIG_H */