]> git.sur5r.net Git - u-boot/blob - include/configs/tb100.h
spi: zynqmp_gqspi: Add support for ZynqMP qspi driver
[u-boot] / include / configs / tb100.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2011-2014 Pierrick Hascoet, Abilis Systems
4  */
5
6 #ifndef _CONFIG_TB100_H_
7 #define _CONFIG_TB100_H_
8
9 #include <linux/sizes.h>
10
11 /*
12  * Memory configuration
13  */
14 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
15
16 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000
17 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
18 #define CONFIG_SYS_SDRAM_SIZE           SZ_128M
19
20 #define CONFIG_SYS_INIT_SP_ADDR         \
21         (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
22
23 #define CONFIG_SYS_MALLOC_LEN           SZ_128K
24 #define CONFIG_SYS_BOOTM_LEN            SZ_32M
25 #define CONFIG_SYS_LOAD_ADDR            0x82000000
26
27 /*
28  * UART configuration
29  */
30 #define CONFIG_SYS_NS16550_SERIAL
31 #define CONFIG_SYS_NS16550_CLK          166666666
32
33 /*
34  * Even though the board houses Realtek RTL8211E PHY
35  * corresponding PHY driver (drivers/net/phy/realtek.c) behaves unexpectedly.
36  * In particular "parse_status" reports link is down.
37  *
38  * Until Realtek PHY driver is fixed fall back to generic PHY driver
39  * which implements all required functionality and behaves much more stable.
40  *
41  * #define CONFIG_PHY_REALTEK
42  *
43  */
44
45 /*
46  * Ethernet configuration
47  */
48 #define ETH0_BASE_ADDRESS               0xFE100000
49 #define ETH1_BASE_ADDRESS               0xFE110000
50
51 /*
52  * Command line configuration
53  */
54
55 /*
56  * Environment settings
57  */
58 #define CONFIG_ENV_SIZE                 SZ_2K
59 #define CONFIG_ENV_OFFSET               0
60
61 /*
62  * Environment configuration
63  */
64 #define CONFIG_BOOTFILE                 "uImage"
65 #define CONFIG_LOADADDR                 CONFIG_SYS_LOAD_ADDR
66
67 /*
68  * Console configuration
69  */
70
71 #endif /* _CONFIG_TB100_H_ */