git.sur5r.net Git - u-boot/blob - include/configs/tegra-common-post.h

   1 /*
   2  * (C) Copyright 2010-2012
   3  * NVIDIA Corporation <www.nvidia.com>
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 #ifndef __TEGRA_COMMON_POST_H
  25 #define __TEGRA_COMMON_POST_H
  26
  27 #ifdef CONFIG_BOOTCOMMAND
  28
  29 #define BOOTCMDS_COMMON ""
  30
  31 #else
  32
  33 #ifdef CONFIG_CMD_EXT2
  34 #define BOOT_FSTYPE_EXT2 "ext2 "
  35 #else
  36 #define BOOT_FSTYPE_EXT2 ""
  37 #endif
  38
  39 #ifdef CONFIG_CMD_FAT
  40 #define BOOT_FSTYPE_FAT "fat"
  41 #else
  42 #define BOOT_FSTYPE_FAT ""
  43 #endif
  44
  45 #ifdef CONFIG_CMD_MMC
  46 #define BOOTCMDS_MMC \
  47         "mmc_boot=" \
  48                 "setenv devtype mmc; " \
  49                 "if mmc dev ${devnum}; then " \
  50                         "run scan_boot; " \
  51                 "fi\0" \
  52         "bootcmd_mmc0=setenv devnum 0; run mmc_boot;\0" \
  53         "bootcmd_mmc1=setenv devnum 1; run mmc_boot;\0"
  54 #define BOOT_TARGETS_MMC "mmc1 mmc0"
  55 #else
  56 #define BOOTCMDS_MMC ""
  57 #define BOOT_TARGETS_MMC ""
  58 #endif
  59
  60 #ifdef CONFIG_CMD_USB
  61 #define BOOTCMD_INIT_USB "run usb_init; "
  62 #define BOOTCMDS_USB \
  63         "usb_init=" \
  64                 "if ${usb_need_init}; then " \
  65                         "set usb_need_init false; " \
  66                         "usb start 0; " \
  67                 "fi\0" \
  68         \
  69         "usb_boot=" \
  70                 "setenv devtype usb; " \
  71                 BOOTCMD_INIT_USB \
  72                 "if usb dev ${devnum}; then " \
  73                         "run scan_boot; " \
  74                 "fi\0" \
  75         \
  76         "bootcmd_usb0=setenv devnum 0; run usb_boot;\0"
  77 #define BOOT_TARGETS_USB "usb0"
  78 #else
  79 #define BOOTCMD_INIT_USB ""
  80 #define BOOTCMDS_USB ""
  81 #define BOOT_TARGETS_USB ""
  82 #endif
  83
  84 #ifdef CONFIG_CMD_DHCP
  85 #define BOOTCMDS_DHCP \
  86         "bootcmd_dhcp=" \
  87                 BOOTCMD_INIT_USB \
  88                 "if dhcp ${scriptaddr} boot.scr.uimg; then "\
  89                         "source ${scriptaddr}; " \
  90                 "fi\0"
  91 #define BOOT_TARGETS_DHCP "dhcp"
  92 #else
  93 #define BOOTCMDS_DHCP ""
  94 #define BOOT_TARGETS_DHCP ""
  95 #endif
  96
  97 #define BOOTCMDS_COMMON \
  98         "rootpart=1\0" \
  99         \
 100         "script_boot="                                                    \
 101                 "if ${fs}load ${devtype} ${devnum}:${rootpart} "          \
 102                                 "${scriptaddr} ${prefix}${script}; then " \
 103                         "echo ${script} found! Executing ...;"            \
 104                         "source ${scriptaddr};"                           \
 105                 "fi;\0"                                                   \
 106         \
 107         "scan_boot="                                                      \
 108                 "echo Scanning ${devtype} ${devnum}...; "                 \
 109                 "for fs in ${boot_fstypes}; do "                          \
 110                         "for prefix in ${boot_prefixes}; do "             \
 111                                 "for script in ${boot_scripts}; do "      \
 112                                         "run script_boot; "               \
 113                                 "done; "                                  \
 114                         "done; "                                          \
 115                 "done;\0"                                                 \
 116         \
 117         "boot_targets=" \
 118                 BOOT_TARGETS_MMC " " \
 119                 BOOT_TARGETS_USB " " \
 120                 BOOT_TARGETS_DHCP " " \
 121                 "\0" \
 122         \
 123         "boot_fstypes=" \
 124                 BOOT_FSTYPE_EXT2 " " \
 125                 BOOT_FSTYPE_FAT " " \
 126                 "\0" \
 127         \
 128         "boot_prefixes=/ /boot/\0" \
 129         \
 130         "boot_scripts=boot.scr.uimg boot.scr\0" \
 131         \
 132         BOOTCMDS_MMC \
 133         BOOTCMDS_USB \
 134         BOOTCMDS_DHCP
 135
 136 #define CONFIG_BOOTCOMMAND \
 137         "for target in ${boot_targets}; do run bootcmd_${target}; done"
 138
 139 #endif
 140
 141 /*
 142  * Memory layout for where various images get loaded by boot scripts:
 143  *
 144  * scriptaddr can be pretty much anywhere that doesn't conflict with something
 145  *   else. Put it above BOOTMAPSZ to eliminate conflicts.
 146  *
 147  * kernel_addr_r must be within the first 128M of RAM in order for the
 148  *   kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
 149  *   decompress itself to 0x8000 after the start of RAM, kernel_addr_r
 150  *   should not overlap that area, or the kernel will have to copy itself
 151  *   somewhere else before decompression. Similarly, the address of any other
 152  *   data passed to the kernel shouldn't overlap the start of RAM. Pushing
 153  *   this up to 16M allows for a sizable kernel to be decompressed below the
 154  *   compressed load address.
 155  *
 156  * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
 157  *   the compressed kernel to be up to 16M too.
 158  *
 159  * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
 160  *   for the FDT/DTB to be up to 1M, which is hopefully plenty.
 161  */
 162 #define MEM_LAYOUT_ENV_SETTINGS \
 163         "scriptaddr=0x10000000\0" \
 164         "kernel_addr_r=0x01000000\0" \
 165         "fdt_addr_r=0x02000000\0" \
 166         "ramdisk_addr_r=0x02100000\0" \
 167
 168 #ifdef CONFIG_TEGRA_KEYBOARD
 169 #define STDIN_KBD_KBC ",tegra-kbc"
 170 #else
 171 #define STDIN_KBD_KBC ""
 172 #endif
 173
 174 #ifdef CONFIG_USB_KEYBOARD
 175 #define STDIN_KBD_USB ",usbkbd"
 176 #define CONFIG_SYS_USB_EVENT_POLL
 177 #define CONFIG_PREBOOT                  "usb start"
 178 #else
 179 #define STDIN_KBD_USB ""
 180 #endif
 181
 182 #define TEGRA_DEVICE_SETTINGS \
 183         "stdin=serial" STDIN_KBD_KBC STDIN_KBD_USB "\0" \
 184         "stdout=serial\0" \
 185         "stderr=serial\0" \
 186
 187 #define CONFIG_EXTRA_ENV_SETTINGS \
 188         TEGRA_DEVICE_SETTINGS \
 189         MEM_LAYOUT_ENV_SETTINGS \
 190         BOOTCMDS_COMMON
 191
 192 /* overrides for SPL build here */
 193 #ifdef CONFIG_SPL_BUILD
 194
 195 /* remove devicetree support */
 196 #ifdef CONFIG_OF_CONTROL
 197 #undef CONFIG_OF_CONTROL
 198 #endif
 199
 200 /* remove I2C support */
 201 #ifdef CONFIG_TEGRA_I2C
 202 #undef CONFIG_TEGRA_I2C
 203 #endif
 204 #ifdef CONFIG_CMD_I2C
 205 #undef CONFIG_CMD_I2C
 206 #endif
 207
 208 /* remove MMC support */
 209 #ifdef CONFIG_MMC
 210 #undef CONFIG_MMC
 211 #endif
 212 #ifdef CONFIG_GENERIC_MMC
 213 #undef CONFIG_GENERIC_MMC
 214 #endif
 215 #ifdef CONFIG_TEGRA_MMC
 216 #undef CONFIG_TEGRA_MMC
 217 #endif
 218 #ifdef CONFIG_CMD_MMC
 219 #undef CONFIG_CMD_MMC
 220 #endif
 221
 222 /* remove partitions/filesystems */
 223 #ifdef CONFIG_DOS_PARTITION
 224 #undef CONFIG_DOS_PARTITION
 225 #endif
 226 #ifdef CONFIG_EFI_PARTITION
 227 #undef CONFIG_EFI_PARTITION
 228 #endif
 229 #ifdef CONFIG_CMD_EXT2
 230 #undef CONFIG_CMD_EXT2
 231 #endif
 232 #ifdef CONFIG_CMD_FAT
 233 #undef CONFIG_CMD_FAT
 234 #endif
 235
 236 /* remove USB */
 237 #ifdef CONFIG_USB_EHCI
 238 #undef CONFIG_USB_EHCI
 239 #endif
 240 #ifdef CONFIG_USB_EHCI_TEGRA
 241 #undef CONFIG_USB_EHCI_TEGRA
 242 #endif
 243 #ifdef CONFIG_USB_STORAGE
 244 #undef CONFIG_USB_STORAGE
 245 #endif
 246 #ifdef CONFIG_CMD_USB
 247 #undef CONFIG_CMD_USB
 248 #endif
 249
 250 /* remove part command support */
 251 #ifdef CONFIG_PARTITION_UUIDS
 252 #undef CONFIG_PARTITION_UUIDS
 253 #endif
 254
 255 #ifdef CONFIG_CMD_PART
 256 #undef CONFIG_CMD_PART
 257 #endif
 258
 259 #endif /* CONFIG_SPL_BUILD */
 260
 261 #endif /* __TEGRA_COMMON_POST_H */