2 * Copyright (C) 2012 Marek Vasut <marex@denx.de>
3 * on behalf of DENX Software Engineering GmbH
5 * See file CREDITS for list of people who contributed to this
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
24 #ifndef __CONFIG_TK71_H__
25 #define __CONFIG_TK71_H__
28 * Version number information
30 #define CONFIG_IDENT_STRING "\nKa-Ro TK71"
33 * High Level Configuration Options (easy to change)
35 #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
36 #define CONFIG_KIRKWOOD 1 /* SOC Family Name */
37 #define CONFIG_KW88F6281 1 /* SOC Name */
38 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
39 #define CONFIG_NR_DRAM_BANKS 1
41 #define MACH_TYPE_TK71 2399
42 #define CONFIG_MACH_TYPE MACH_TYPE_TK71
45 * Commands configuration
47 #define CONFIG_SYS_HUSH_PARSER
49 #define CONFIG_SYS_NO_FLASH
50 #define CONFIG_DOS_PARTITION
51 #define CONFIG_SUPPORT_VFAT
53 #include <config_cmd_default.h>
54 #define CONFIG_CMD_DHCP
55 #define CONFIG_CMD_ENV
56 #define CONFIG_CMD_EXT2
57 #define CONFIG_CMD_FAT
58 #define CONFIG_CMD_MTDPARTS
59 #define CONFIG_CMD_NAND
60 #define CONFIG_CMD_PING
61 #define CONFIG_CMD_USB
64 * mv-common.h should be defined after CMD configs since it used them
65 * to enable certain macros
67 #include "mv-common.h"
72 #ifdef CONFIG_CMD_NAND
73 #define CONFIG_MTD_DEVICE
74 #define CONFIG_MTD_PARTITIONS
75 #define CONFIG_JFFS2_NAND
76 #define CONFIG_JFFS2_DEV "nand0,3"
80 * Ethernet Driver configuration
83 #define CONFIG_MVGBE_PORTS {1, 0}
84 #define CONFIG_PHY_BASE_ADR 0x08
91 #define CONFIG_USB_EHCI
92 #define CONFIG_USB_EHCI_KIRKWOOD
93 #define CONFIG_EHCI_IS_TDI
94 #define CONFIG_USB_STORAGE
98 * Environment variables configurations
100 #ifdef CONFIG_CMD_NAND
101 #define CONFIG_ENV_IS_IN_NAND
102 #define CONFIG_ENV_SECT_SIZE 0x20000
104 #define CONFIG_ENV_IS_NOWHERE
107 #define CONFIG_ENV_SIZE 0x20000
108 #define CONFIG_ENV_ADDR 0x80000
109 #define CONFIG_ENV_OFFSET 0x80000
112 * Default environment variables
114 #define CONFIG_BOOTCOMMAND "nand read 0x800000 kernel 0x300000; bootm;"
115 #define CONFIG_MTDPARTS "512K(u-boot),512K(u-boot-env),3M(kernel),-(root)"
116 #define CONFIG_EXTRA_ENV_SETTINGS \
117 "update_uboot=dhcp u-boot.kwb; nand erase.part u-boot; nand write ${fileaddr} u-boot ${filesize}\0" \
118 "update_kernel=dhcp uImage-tk71; nand erase.part kernel; nand write ${fileaddr} kernel ${filesize} \0" \
119 "update_rootfs=dhcp rootfs-tk71; nand erase.part root; nand write ${fileaddr} root ${filesize}\0" \
120 "update_all=run update_uboot; run update_kernel; run update_rootfs; reset\0" \
121 "mtdids=nand0=orion_nand\0" \
122 "mtdparts=mtdparts=orion_nand:"CONFIG_MTDPARTS"\0" \
123 "bootargs=console=ttyS0,115200 mtdparts=orion_nand:"CONFIG_MTDPARTS" rootfstype=jffs2 root=/dev/mtdblock3 rw\0"
124 #define MTDIDS_DEFAULT "nand0=orion_nand"
125 #define MTDPARTS_DEFAULT "mtdparts=orion_nand:"CONFIG_MTDPARTS
127 #define PHYS_SDRAM_1 0x00000000 /* Base address */
128 #define PHYS_SDRAM_1_SIZE 0x20000000 /* Max 512 MB RAM */
130 #endif /* __CONFIG_TK71_H__ */