git.sur5r.net Git - u-boot/blob - include/configs/uniphier.h

   1 /*
   2  * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /* U-Boot - Common settings for UniPhier Family */
   8
   9 #ifndef __CONFIG_UNIPHIER_COMMON_H__
  10 #define __CONFIG_UNIPHIER_COMMON_H__
  11
  12 #define CONFIG_I2C_EEPROM
  13 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
  14
  15 #ifdef CONFIG_SYS_NS16550_SERIAL
  16 #define CONFIG_SYS_NS16550_COM1         CONFIG_SUPPORT_CARD_UART_BASE
  17 #define CONFIG_SYS_NS16550_CLK          12288000
  18 #define CONFIG_SYS_NS16550_REG_SIZE     -2
  19 #endif
  20
  21 #define CONFIG_SMC911X
  22
  23 /* dummy: referenced by examples/standalone/smc911x_eeprom.c */
  24 #define CONFIG_SMC911X_BASE     0
  25 #define CONFIG_SMC911X_32_BIT
  26
  27 /*-----------------------------------------------------------------------
  28  * MMU and Cache Setting
  29  *----------------------------------------------------------------------*/
  30
  31 /* Comment out the following to enable L1 cache */
  32 /* #define CONFIG_SYS_ICACHE_OFF */
  33 /* #define CONFIG_SYS_DCACHE_OFF */
  34
  35 #define CONFIG_SYS_CACHELINE_SIZE       32
  36
  37 /* Comment out the following to disable L2 cache */
  38 #define CONFIG_UNIPHIER_L2CACHE_ON
  39
  40 #define CONFIG_DISPLAY_CPUINFO
  41 #define CONFIG_DISPLAY_BOARDINFO
  42 #define CONFIG_MISC_INIT_F
  43 #define CONFIG_BOARD_EARLY_INIT_F
  44 #define CONFIG_BOARD_EARLY_INIT_R
  45 #define CONFIG_BOARD_LATE_INIT
  46
  47 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
  48
  49 #define CONFIG_TIMESTAMP
  50
  51 /* FLASH related */
  52 #define CONFIG_MTD_DEVICE
  53
  54 /*
  55  * uncomment the following to disable FLASH related code.
  56  */
  57 /* #define CONFIG_SYS_NO_FLASH */
  58
  59 #define CONFIG_FLASH_CFI_DRIVER
  60 #define CONFIG_SYS_FLASH_CFI
  61
  62 #define CONFIG_SYS_MAX_FLASH_SECT       256
  63 #define CONFIG_SYS_MONITOR_BASE         0
  64 #define CONFIG_SYS_MONITOR_LEN          0x00080000      /* 512KB */
  65 #define CONFIG_SYS_FLASH_BASE           0
  66
  67 /*
  68  * flash_toggle does not work for out supoort card.
  69  * We need to use flash_status_poll.
  70  */
  71 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL
  72
  73 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
  74
  75 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
  76
  77 /* serial console configuration */
  78 #define CONFIG_BAUDRATE                 115200
  79
  80
  81 #if !defined(CONFIG_SPL_BUILD)
  82 #define CONFIG_USE_ARCH_MEMSET
  83 #define CONFIG_USE_ARCH_MEMCPY
  84 #endif
  85
  86 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
  87
  88 #define CONFIG_CMDLINE_EDITING          /* add command line history     */
  89 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
  90 /* Print Buffer Size */
  91 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
  92 #define CONFIG_SYS_MAXARGS              16      /* max number of command */
  93 /* Boot Argument Buffer Size */
  94 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
  95
  96 #define CONFIG_CONS_INDEX               1
  97
  98 /* #define CONFIG_ENV_IS_NOWHERE */
  99 /* #define CONFIG_ENV_IS_IN_NAND */
 100 #define CONFIG_ENV_IS_IN_MMC
 101 #define CONFIG_ENV_OFFSET                       0x80000
 102 #define CONFIG_ENV_SIZE                         0x2000
 103 /* #define CONFIG_ENV_OFFSET_REDUND     (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
 104
 105 #define CONFIG_SYS_MMC_ENV_DEV          0
 106 #define CONFIG_SYS_MMC_ENV_PART         1
 107
 108 /* Time clock 1MHz */
 109 #define CONFIG_SYS_TIMER_RATE                   1000000
 110
 111 /*
 112  * By default, ARP timeout is 5 sec.
 113  * The first ARP request does not seem to work.
 114  * So we need to retry ARP request anyway.
 115  * We want to shrink the interval until the second ARP request.
 116  */
 117 #define CONFIG_ARP_TIMEOUT      500UL  /* 0.5 msec */
 118
 119 #define CONFIG_SYS_MAX_NAND_DEVICE                      1
 120 #define CONFIG_SYS_NAND_MAX_CHIPS                       2
 121 #define CONFIG_SYS_NAND_ONFI_DETECTION
 122
 123 #define CONFIG_NAND_DENALI_ECC_SIZE                     1024
 124
 125 #ifdef CONFIG_ARCH_UNIPHIER_SLD3
 126 #define CONFIG_SYS_NAND_REGS_BASE                       0xf8100000
 127 #define CONFIG_SYS_NAND_DATA_BASE                       0xf8000000
 128 #else
 129 #define CONFIG_SYS_NAND_REGS_BASE                       0x68100000
 130 #define CONFIG_SYS_NAND_DATA_BASE                       0x68000000
 131 #endif
 132
 133 #define CONFIG_SYS_NAND_BASE            (CONFIG_SYS_NAND_DATA_BASE + 0x10)
 134
 135 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 136 #define CONFIG_SYS_NAND_BAD_BLOCK_POS                   0
 137
 138 /* USB */
 139 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
 140 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      4
 141 #define CONFIG_CMD_FAT
 142 #define CONFIG_FAT_WRITE
 143 #define CONFIG_DOS_PARTITION
 144
 145 /* SD/MMC */
 146 #define CONFIG_CMD_MMC
 147 #define CONFIG_SUPPORT_EMMC_BOOT
 148 #define CONFIG_GENERIC_MMC
 149
 150 /* memtest works on */
 151 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
 152 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x01000000)
 153
 154 #define CONFIG_BOOTDELAY                        3
 155 #define CONFIG_ZERO_BOOTDELAY_CHECK     /* check for keypress on bootdelay==0 */
 156
 157 /*
 158  * Network Configuration
 159  */
 160 #define CONFIG_SERVERIP                 192.168.11.1
 161 #define CONFIG_IPADDR                   192.168.11.10
 162 #define CONFIG_GATEWAYIP                192.168.11.1
 163 #define CONFIG_NETMASK                  255.255.255.0
 164
 165 #define CONFIG_LOADADDR                 0x84000000
 166 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 167
 168 #define CONFIG_CMDLINE_EDITING          /* add command line history     */
 169
 170 #define CONFIG_BOOTCOMMAND              "run $bootmode"
 171
 172 #define CONFIG_ROOTPATH                 "/nfs/root/path"
 173 #define CONFIG_NFSBOOTCOMMAND                                           \
 174         "setenv bootargs $bootargs root=/dev/nfs rw "                   \
 175         "nfsroot=$serverip:$rootpath "                                  \
 176         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
 177                 "run __nfsboot"
 178
 179 #ifdef CONFIG_FIT
 180 #define CONFIG_BOOTFILE                 "fitImage"
 181 #define LINUXBOOT_ENV_SETTINGS \
 182         "fit_addr=0x00100000\0" \
 183         "fit_addr_r=0x84100000\0" \
 184         "fit_size=0x00f00000\0" \
 185         "norboot=setexpr fit_addr $nor_base + $fit_addr &&" \
 186                 "bootm $fit_addr\0" \
 187         "nandboot=nand read $fit_addr_r $fit_addr $fit_size &&" \
 188                 "bootm $fit_addr_r\0" \
 189         "tftpboot=tftpboot $fit_addr_r $bootfile &&" \
 190                 "bootm $fit_addr_r\0" \
 191         "__nfsboot=run tftpboot\0"
 192 #else
 193 #define CONFIG_CMD_BOOTZ
 194 #define CONFIG_BOOTFILE                 "zImage"
 195 #define LINUXBOOT_ENV_SETTINGS \
 196         "fdt_addr=0x00100000\0" \
 197         "fdt_addr_r=0x84100000\0" \
 198         "fdt_size=0x00008000\0" \
 199         "kernel_addr=0x00200000\0" \
 200         "kernel_addr_r=0x80208000\0" \
 201         "kernel_size=0x00800000\0" \
 202         "ramdisk_addr=0x00a00000\0" \
 203         "ramdisk_addr_r=0x84a00000\0" \
 204         "ramdisk_size=0x00600000\0" \
 205         "ramdisk_file=rootfs.cpio.uboot\0" \
 206         "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \
 207                 "bootz $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
 208         "norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \
 209                 "cp.b $kernel_addr $kernel_addr_r $kernel_size &&" \
 210                 "setexpr ramdisk_addr_r $nor_base + $ramdisk_addr &&" \
 211                 "setexpr fdt_addr_r $nor_base + $fdt_addr &&" \
 212                 "run boot_common\0" \
 213         "nandboot=nand read $kernel_addr_r $kernel_addr $kernel_size &&" \
 214                 "nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \
 215                 "nand read $fdt_addr_r $fdt_addr $fdt_size &&" \
 216                 "run boot_common\0" \
 217         "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
 218                 "tftpboot $ramdisk_addr_r $ramdisk_file &&" \
 219                 "tftpboot $fdt_addr_r $fdt_file &&" \
 220                 "run boot_common\0" \
 221         "__nfsboot=tftpboot $kernel_addr_r $bootfile &&" \
 222                 "tftpboot $fdt_addr_r $fdt_file &&" \
 223                 "tftpboot $fdt_addr_r $fdt_file &&" \
 224                 "setenv ramdisk_addr_r - &&" \
 225                 "run boot_common\0"
 226 #endif
 227
 228 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 229         "netdev=eth0\0"                                         \
 230         "verify=n\0"                                            \
 231         "nor_base=0x42000000\0"                                 \
 232         "emmcupdate=mmcsetn &&"                                 \
 233                 "mmc partconf $mmc_first_dev 0 1 1 &&"          \
 234                 "mmc erase 0 800 &&"                            \
 235                 "tftpboot u-boot-spl.bin &&"                    \
 236                 "mmc write $loadaddr 0 80 &&"                   \
 237                 "tftpboot u-boot.bin &&"                        \
 238                 "mmc write $loadaddr 80 780\0"                  \
 239         "nandupdate=nand erase 0 0x00100000 &&"                 \
 240                 "tftpboot u-boot-spl.bin &&"                    \
 241                 "nand write $loadaddr 0 0x00010000 &&"          \
 242                 "tftpboot u-boot.bin &&"                        \
 243                 "nand write $loadaddr 0x00010000 0x000f0000\0"  \
 244         LINUXBOOT_ENV_SETTINGS
 245
 246 #define CONFIG_SYS_BOOTMAPSZ                    0x20000000
 247
 248 #define CONFIG_SYS_SDRAM_BASE           0x80000000
 249 #define CONFIG_NR_DRAM_BANKS            2
 250
 251 #if defined(CONFIG_ARCH_UNIPHIER_SLD3) || defined(CONFIG_ARCH_UNIPHIER_LD4) || \
 252         defined(CONFIG_ARCH_UNIPHIER_SLD8)
 253 #define CONFIG_SPL_TEXT_BASE            0x00040000
 254 #else
 255 #define CONFIG_SPL_TEXT_BASE            0x00100000
 256 #endif
 257
 258 #define CONFIG_SPL_STACK                (0x00100000)
 259 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE)
 260
 261 #define CONFIG_PANIC_HANG
 262
 263 #define CONFIG_SPL_FRAMEWORK
 264 #define CONFIG_SPL_SERIAL_SUPPORT
 265 #define CONFIG_SPL_NOR_SUPPORT
 266 #define CONFIG_SPL_NAND_SUPPORT
 267 #define CONFIG_SPL_MMC_SUPPORT
 268
 269 #define CONFIG_SPL_LIBCOMMON_SUPPORT    /* for mem_malloc_init */
 270 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 271
 272 #define CONFIG_SPL_BOARD_INIT
 273
 274 #define CONFIG_SYS_NAND_U_BOOT_OFFS             0x10000
 275
 276 /* subtract sizeof(struct image_header) */
 277 #define CONFIG_SYS_UBOOT_BASE                   (0x60000 - 0x40)
 278 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80
 279
 280 #define CONFIG_SPL_TARGET                       "u-boot-with-spl.bin"
 281 #define CONFIG_SPL_MAX_FOOTPRINT                0x10000
 282 #define CONFIG_SPL_MAX_SIZE                     0x10000
 283
 284 #endif /* __CONFIG_UNIPHIER_COMMON_H__ */