2 * Copyright 2013 Freescale Semiconductor, Inc.
4 * Configuration settings for the Freescale Vybrid vf610twr board.
6 * SPDX-License-Identifier: GPL-2.0+
12 #include <asm/arch/imx-regs.h>
13 #include <config_cmd_default.h>
17 #define CONFIG_SYS_GENERIC_BOARD
18 #define CONFIG_DISPLAY_CPUINFO
19 #define CONFIG_DISPLAY_BOARDINFO
21 #define CONFIG_MACH_TYPE 4146
23 #define CONFIG_SKIP_LOWLEVEL_INIT
25 /* Enable passing of ATAGs */
26 #define CONFIG_CMDLINE_TAG
28 #define CONFIG_CMD_FUSE
29 #ifdef CONFIG_CMD_FUSE
30 #define CONFIG_MXC_OCOTP
33 /* Size of malloc() pool */
34 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
36 #define CONFIG_BOARD_EARLY_INIT_F
38 #define CONFIG_FSL_LPUART
39 #define LPUART_BASE UART1_BASE
41 /* Allow to overwrite serial and ethaddr */
42 #define CONFIG_ENV_OVERWRITE
43 #define CONFIG_SYS_UART_PORT (1)
44 #define CONFIG_BAUDRATE 115200
46 #undef CONFIG_CMD_IMLS
49 #define CONFIG_CMD_NAND
50 #define CONFIG_CMD_NAND_TRIMFFS
52 #ifdef CONFIG_CMD_NAND
53 #define CONFIG_NAND_VF610_NFC
54 #define CONFIG_SYS_NAND_SELF_INIT
55 #define CONFIG_USE_ARCH_MEMCPY
56 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
57 #define CONFIG_SYS_MAX_NAND_DEVICE 1
58 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
61 #define CONFIG_CMD_UBI
62 #define CONFIG_CMD_UBIFS
63 #define CONFIG_CMD_MTDPARTS
66 #define CONFIG_MTD_DEVICE
67 #define CONFIG_MTD_PARTITIONS
69 /* Dynamic MTD partition support */
70 #define CONFIG_CMD_MTDPARTS
71 #define CONFIG_MTD_PARTITIONS
72 #define CONFIG_MTD_DEVICE
73 #define MTDIDS_DEFAULT "nand0=fsl_nfc"
74 #define MTDPARTS_DEFAULT "mtdparts=fsl_nfc:" \
84 #define CONFIG_FSL_ESDHC
85 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
86 #define CONFIG_SYS_FSL_ESDHC_NUM 1
88 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
90 #define CONFIG_CMD_MMC
91 #define CONFIG_GENERIC_MMC
92 #define CONFIG_CMD_FAT
93 #define CONFIG_DOS_PARTITION
95 #define CONFIG_CMD_PING
96 #define CONFIG_CMD_DHCP
97 #define CONFIG_CMD_MII
98 #define CONFIG_CMD_NET
99 #define CONFIG_FEC_MXC
101 #define IMX_FEC_BASE ENET_BASE_ADDR
102 #define CONFIG_FEC_XCV_TYPE RMII
103 #define CONFIG_FEC_MXC_PHYADDR 0
104 #define CONFIG_PHYLIB
105 #define CONFIG_PHY_MICREL
108 #define CONFIG_FSL_QSPI
110 #ifdef CONFIG_FSL_QSPI
111 #define CONFIG_CMD_SF
112 #define CONFIG_SPI_FLASH
113 #define CONFIG_SPI_FLASH_SPANSION
114 #define FSL_QSPI_FLASH_SIZE (1 << 24)
115 #define FSL_QSPI_FLASH_NUM 2
116 #define CONFIG_SYS_FSL_QSPI_LE
120 #define CONFIG_CMD_I2C
121 #define CONFIG_SYS_I2C
122 #define CONFIG_SYS_I2C_MXC
123 #define CONFIG_SYS_SPD_BUS_NUM 0
125 #define CONFIG_BOOTDELAY 3
127 #define CONFIG_LOADADDR 0x82000000
129 /* We boot from the gfxRAM area of the OCRAM. */
130 #define CONFIG_SYS_TEXT_BASE 0x3f408000
131 #define CONFIG_BOARD_SIZE_LIMIT 524288
133 #define CONFIG_EXTRA_ENV_SETTINGS \
134 "script=boot.scr\0" \
137 "fdt_high=0xffffffff\0" \
138 "initrd_high=0xffffffff\0" \
139 "fdt_file=vf610-twr.dtb\0" \
140 "fdt_addr=0x81000000\0" \
143 "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
145 "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
146 "update_sd_firmware_filename=u-boot.imx\0" \
147 "update_sd_firmware=" \
148 "if test ${ip_dyn} = yes; then " \
149 "setenv get_cmd dhcp; " \
151 "setenv get_cmd tftp; " \
153 "if mmc dev ${mmcdev}; then " \
154 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
155 "setexpr fw_sz ${filesize} / 0x200; " \
156 "setexpr fw_sz ${fw_sz} + 1; " \
157 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
160 "mmcargs=setenv bootargs console=${console},${baudrate} " \
161 "root=${mmcroot}\0" \
163 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
164 "bootscript=echo Running bootscript from mmc ...; " \
166 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
167 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
168 "mmcboot=echo Booting from mmc ...; " \
170 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
171 "if run loadfdt; then " \
172 "bootz ${loadaddr} - ${fdt_addr}; " \
174 "if test ${boot_fdt} = try; then " \
177 "echo WARN: Cannot load the DT; " \
183 "netargs=setenv bootargs console=${console},${baudrate} " \
185 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
186 "netboot=echo Booting from net ...; " \
188 "if test ${ip_dyn} = yes; then " \
189 "setenv get_cmd dhcp; " \
191 "setenv get_cmd tftp; " \
193 "${get_cmd} ${image}; " \
194 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
195 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
196 "bootz ${loadaddr} - ${fdt_addr}; " \
198 "if test ${boot_fdt} = try; then " \
201 "echo WARN: Cannot load the DT; " \
208 #define CONFIG_BOOTCOMMAND \
209 "mmc dev ${mmcdev}; if mmc rescan; then " \
210 "if run loadbootscript; then " \
213 "if run loadimage; then " \
215 "else run netboot; " \
218 "else run netboot; fi"
220 /* Miscellaneous configurable options */
221 #define CONFIG_SYS_LONGHELP /* undef to save memory */
222 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
223 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
224 #undef CONFIG_AUTO_COMPLETE
225 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
226 #define CONFIG_SYS_PBSIZE \
227 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
228 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
229 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
231 #define CONFIG_CMD_MEMTEST
232 #define CONFIG_SYS_MEMTEST_START 0x80010000
233 #define CONFIG_SYS_MEMTEST_END 0x87C00000
235 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
239 * The stack sizes are set up in start.S using the settings below
241 #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
243 /* Physical memory map */
244 #define CONFIG_NR_DRAM_BANKS 1
245 #define PHYS_SDRAM (0x80000000)
246 #define PHYS_SDRAM_SIZE (128 * 1024 * 1024)
248 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
249 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
250 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
252 #define CONFIG_SYS_INIT_SP_OFFSET \
253 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
254 #define CONFIG_SYS_INIT_SP_ADDR \
255 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
257 /* FLASH and environment organization */
258 #define CONFIG_SYS_NO_FLASH
260 #ifdef CONFIG_ENV_IS_IN_MMC
261 #define CONFIG_ENV_SIZE (8 * 1024)
263 #define CONFIG_ENV_OFFSET (12 * 64 * 1024)
264 #define CONFIG_SYS_MMC_ENV_DEV 0
267 #ifdef CONFIG_ENV_IS_IN_NAND
268 #define CONFIG_ENV_SIZE (64 * 2048)
269 #define CONFIG_ENV_SECT_SIZE (64 * 2048)
270 #define CONFIG_ENV_RANGE (512 * 1024)
271 #define CONFIG_ENV_OFFSET 0x180000
274 #define CONFIG_OF_LIBFDT
275 #define CONFIG_CMD_BOOTZ