2 * Copyright 2013 Freescale Semiconductor, Inc.
4 * Configuration settings for the Freescale Vybrid vf610twr board.
6 * SPDX-License-Identifier: GPL-2.0+
12 #include <asm/arch/imx-regs.h>
16 #define CONFIG_SYS_GENERIC_BOARD
17 #define CONFIG_DISPLAY_CPUINFO
18 #define CONFIG_DISPLAY_BOARDINFO
20 #define CONFIG_MACH_TYPE 4146
22 #define CONFIG_SKIP_LOWLEVEL_INIT
24 /* Enable passing of ATAGs */
25 #define CONFIG_CMDLINE_TAG
27 #define CONFIG_CMD_FUSE
28 #ifdef CONFIG_CMD_FUSE
29 #define CONFIG_MXC_OCOTP
32 /* Size of malloc() pool */
33 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
35 #define CONFIG_BOARD_EARLY_INIT_F
37 #define CONFIG_FSL_LPUART
38 #define LPUART_BASE UART1_BASE
40 /* Allow to overwrite serial and ethaddr */
41 #define CONFIG_ENV_OVERWRITE
42 #define CONFIG_SYS_UART_PORT (1)
43 #define CONFIG_BAUDRATE 115200
46 #define CONFIG_CMD_NAND
47 #define CONFIG_CMD_NAND_TRIMFFS
48 #define CONFIG_SYS_NAND_ONFI_DETECTION
50 #ifdef CONFIG_CMD_NAND
51 #define CONFIG_USE_ARCH_MEMCPY
52 #define CONFIG_SYS_MAX_NAND_DEVICE 1
53 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
56 #define CONFIG_CMD_UBI
57 #define CONFIG_CMD_UBIFS
61 /* Dynamic MTD partition support */
62 #define CONFIG_CMD_MTDPARTS
63 #define CONFIG_MTD_PARTITIONS
64 #define CONFIG_MTD_DEVICE
65 #define MTDIDS_DEFAULT "nand0=fsl_nfc"
66 #define MTDPARTS_DEFAULT "mtdparts=fsl_nfc:" \
76 #define CONFIG_FSL_ESDHC
77 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
78 #define CONFIG_SYS_FSL_ESDHC_NUM 1
80 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
82 #define CONFIG_CMD_MMC
83 #define CONFIG_GENERIC_MMC
84 #define CONFIG_CMD_FAT
85 #define CONFIG_DOS_PARTITION
87 #define CONFIG_CMD_PING
88 #define CONFIG_CMD_DHCP
89 #define CONFIG_CMD_MII
90 #define CONFIG_FEC_MXC
92 #define IMX_FEC_BASE ENET_BASE_ADDR
93 #define CONFIG_FEC_XCV_TYPE RMII
94 #define CONFIG_FEC_MXC_PHYADDR 0
96 #define CONFIG_PHY_MICREL
99 #define CONFIG_FSL_QSPI
101 #ifdef CONFIG_FSL_QSPI
102 #define CONFIG_CMD_SF
103 #define CONFIG_SPI_FLASH_SPANSION
104 #define FSL_QSPI_FLASH_SIZE (1 << 24)
105 #define FSL_QSPI_FLASH_NUM 2
106 #define CONFIG_SYS_FSL_QSPI_LE
110 #define CONFIG_CMD_I2C
111 #define CONFIG_SYS_I2C
112 #define CONFIG_SYS_I2C_MXC
113 #define CONFIG_SYS_SPD_BUS_NUM 0
115 #define CONFIG_BOOTDELAY 3
117 #define CONFIG_LOADADDR 0x82000000
119 /* We boot from the gfxRAM area of the OCRAM. */
120 #define CONFIG_SYS_TEXT_BASE 0x3f408000
121 #define CONFIG_BOARD_SIZE_LIMIT 524288
123 #define CONFIG_EXTRA_ENV_SETTINGS \
124 "script=boot.scr\0" \
127 "fdt_high=0xffffffff\0" \
128 "initrd_high=0xffffffff\0" \
129 "fdt_file=vf610-twr.dtb\0" \
130 "fdt_addr=0x81000000\0" \
133 "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
135 "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
136 "update_sd_firmware_filename=u-boot.imx\0" \
137 "update_sd_firmware=" \
138 "if test ${ip_dyn} = yes; then " \
139 "setenv get_cmd dhcp; " \
141 "setenv get_cmd tftp; " \
143 "if mmc dev ${mmcdev}; then " \
144 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
145 "setexpr fw_sz ${filesize} / 0x200; " \
146 "setexpr fw_sz ${fw_sz} + 1; " \
147 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
150 "mmcargs=setenv bootargs console=${console},${baudrate} " \
151 "root=${mmcroot}\0" \
153 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
154 "bootscript=echo Running bootscript from mmc ...; " \
156 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
157 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
158 "mmcboot=echo Booting from mmc ...; " \
160 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
161 "if run loadfdt; then " \
162 "bootz ${loadaddr} - ${fdt_addr}; " \
164 "if test ${boot_fdt} = try; then " \
167 "echo WARN: Cannot load the DT; " \
173 "netargs=setenv bootargs console=${console},${baudrate} " \
175 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
176 "netboot=echo Booting from net ...; " \
178 "if test ${ip_dyn} = yes; then " \
179 "setenv get_cmd dhcp; " \
181 "setenv get_cmd tftp; " \
183 "${get_cmd} ${image}; " \
184 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
185 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
186 "bootz ${loadaddr} - ${fdt_addr}; " \
188 "if test ${boot_fdt} = try; then " \
191 "echo WARN: Cannot load the DT; " \
198 #define CONFIG_BOOTCOMMAND \
199 "mmc dev ${mmcdev}; if mmc rescan; then " \
200 "if run loadbootscript; then " \
203 "if run loadimage; then " \
205 "else run netboot; " \
208 "else run netboot; fi"
210 /* Miscellaneous configurable options */
211 #define CONFIG_SYS_LONGHELP /* undef to save memory */
212 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
213 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
214 #undef CONFIG_AUTO_COMPLETE
215 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
216 #define CONFIG_SYS_PBSIZE \
217 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
218 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
219 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
221 #define CONFIG_CMD_MEMTEST
222 #define CONFIG_SYS_MEMTEST_START 0x80010000
223 #define CONFIG_SYS_MEMTEST_END 0x87C00000
225 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
229 * The stack sizes are set up in start.S using the settings below
231 #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
233 /* Physical memory map */
234 #define CONFIG_NR_DRAM_BANKS 1
235 #define PHYS_SDRAM (0x80000000)
236 #define PHYS_SDRAM_SIZE (128 * 1024 * 1024)
238 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
239 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
240 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
242 #define CONFIG_SYS_INIT_SP_OFFSET \
243 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
244 #define CONFIG_SYS_INIT_SP_ADDR \
245 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
247 /* FLASH and environment organization */
248 #define CONFIG_SYS_NO_FLASH
250 #ifdef CONFIG_ENV_IS_IN_MMC
251 #define CONFIG_ENV_SIZE (8 * 1024)
253 #define CONFIG_ENV_OFFSET (12 * 64 * 1024)
254 #define CONFIG_SYS_MMC_ENV_DEV 0
257 #ifdef CONFIG_ENV_IS_IN_NAND
258 #define CONFIG_ENV_SIZE (64 * 2048)
259 #define CONFIG_ENV_SECT_SIZE (64 * 2048)
260 #define CONFIG_ENV_RANGE (512 * 1024)
261 #define CONFIG_ENV_OFFSET 0x180000
264 #define CONFIG_OF_LIBFDT
265 #define CONFIG_CMD_BOOTZ