git.sur5r.net Git - u-boot/blob - include/configs/wandboard.h

   1 /*
   2  * Copyright (C) 2013 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Wandboard.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #include "imx6_spl.h"
  15 #define CONFIG_DISPLAY_BOARDINFO_LATE
  16
  17 #define CONFIG_MACH_TYPE                MACH_TYPE_WANDBOARD_IMX6
  18
  19 /* Size of malloc() pool */
  20 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  21
  22 #define CONFIG_MXC_UART
  23 #define CONFIG_MXC_UART_BASE            UART1_BASE
  24
  25 /* SATA Configs */
  26
  27 #ifdef CONFIG_CMD_SATA
  28 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  29 #define CONFIG_DWC_AHSATA_PORT_ID       0
  30 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  31 #define CONFIG_LBA48
  32 #endif
  33
  34 #define CONFIG_SYS_MEMTEST_START        0x10000000
  35 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
  36
  37 /* I2C Configs */
  38 #define CONFIG_SYS_I2C
  39 #define CONFIG_SYS_I2C_MXC
  40 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  41 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  42 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  43 #define CONFIG_SYS_I2C_SPEED            100000
  44
  45 /* PMIC */
  46 #define CONFIG_POWER
  47 #define CONFIG_POWER_I2C
  48 #define CONFIG_POWER_PFUZE100
  49 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
  50
  51 /* MMC Configuration */
  52 #define CONFIG_SYS_FSL_USDHC_NUM        2
  53 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  54
  55 /* USB Configs */
  56 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  57 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  58 #define CONFIG_MXC_USB_FLAGS            0
  59
  60 /* Ethernet Configuration */
  61 #define CONFIG_FEC_MXC
  62 #define CONFIG_MII
  63 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  64 #define CONFIG_FEC_XCV_TYPE             RGMII
  65 #define CONFIG_ETHPRIME                 "FEC"
  66 #define CONFIG_FEC_MXC_PHYADDR          1
  67 #define CONFIG_PHY_ATHEROS
  68
  69 /* Framebuffer */
  70 #ifdef CONFIG_VIDEO
  71 #define CONFIG_VIDEO_IPUV3
  72 #define CONFIG_VIDEO_BMP_RLE8
  73 #define CONFIG_SPLASH_SCREEN
  74 #define CONFIG_SPLASH_SCREEN_ALIGN
  75 #define CONFIG_BMP_16BPP
  76 #define CONFIG_VIDEO_LOGO
  77 #define CONFIG_VIDEO_BMP_LOGO
  78 #define CONFIG_IMX_HDMI
  79 #define CONFIG_IMX_VIDEO_SKIP
  80 #endif
  81
  82 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  83 #define CONFIG_EXTRA_ENV_SETTINGS \
  84         "console=ttymxc0,115200\0" \
  85         "splashpos=m,m\0" \
  86         "fdtfile=undefined\0" \
  87         "fdt_high=0xffffffff\0" \
  88         "initrd_high=0xffffffff\0" \
  89         "fdt_addr_r=0x18000000\0" \
  90         "fdt_addr=0x18000000\0" \
  91         "ip_dyn=yes\0" \
  92         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
  93         "finduuid=part uuid mmc 0:1 uuid\0" \
  94         "update_sd_firmware_filename=u-boot.imx\0" \
  95         "update_sd_firmware=" \
  96                 "if test ${ip_dyn} = yes; then " \
  97                         "setenv get_cmd dhcp; " \
  98                 "else " \
  99                         "setenv get_cmd tftp; " \
 100                 "fi; " \
 101                 "if mmc dev ${mmcdev}; then "   \
 102                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 103                                 "setexpr fw_sz ${filesize} / 0x200; " \
 104                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 105                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 106                         "fi; "  \
 107                 "fi\0" \
 108         "findfdt="\
 109                 "if test $board_name = D1 && test $board_rev = MX6QP ; then " \
 110                         "setenv fdtfile imx6qp-wandboard-revd1.dtb; fi; " \
 111                 "if test $board_name = D1 && test $board_rev = MX6Q ; then " \
 112                         "setenv fdtfile imx6q-wandboard-revd1.dtb; fi; " \
 113                 "if test $board_name = D1 && test $board_rev = MX6DL ; then " \
 114                         "setenv fdtfile imx6dl-wandboard-revd1.dtb; fi; " \
 115                 "if test $board_name = C1 && test $board_rev = MX6Q ; then " \
 116                         "setenv fdtfile imx6q-wandboard.dtb; fi; " \
 117                 "if test $board_name = C1 && test $board_rev = MX6DL ; then " \
 118                         "setenv fdtfile imx6dl-wandboard.dtb; fi; " \
 119                 "if test $board_name = B1 && test $board_rev = MX6Q ; then " \
 120                         "setenv fdtfile imx6q-wandboard-revb1.dtb; fi; " \
 121                 "if test $board_name = B1 && test $board_rev = MX6DL ; then " \
 122                         "setenv fdtfile imx6dl-wandboard-revb1.dtb; fi; " \
 123                 "if test $fdtfile = undefined; then " \
 124                         "echo WARNING: Could not determine dtb to use; fi; \0" \
 125         "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
 126         "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
 127         "ramdisk_addr_r=0x13000000\0" \
 128         "ramdiskaddr=0x13000000\0" \
 129         "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
 130         BOOTENV
 131
 132 #define BOOT_TARGET_DEVICES(func) \
 133         func(MMC, mmc, 0) \
 134         func(MMC, mmc, 1) \
 135         func(SATA, sata, 0) \
 136         func(USB, usb, 0) \
 137         func(PXE, pxe, na) \
 138         func(DHCP, dhcp, na)
 139
 140 #include <config_distro_bootcmd.h>
 141
 142 /* Physical Memory Map */
 143 #define CONFIG_NR_DRAM_BANKS            1
 144 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 145
 146 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 147 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 148 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 149
 150 #define CONFIG_SYS_INIT_SP_OFFSET \
 151         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 152 #define CONFIG_SYS_INIT_SP_ADDR \
 153         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 154
 155 /* Environment organization */
 156 #define CONFIG_ENV_SIZE                 (8 * 1024)
 157
 158 #define CONFIG_ENV_OFFSET               (768 * 1024)
 159 #define CONFIG_SYS_MMC_ENV_DEV          0
 160
 161 #endif                         /* __CONFIG_H * */