]> git.sur5r.net Git - u-boot/blob - include/configs/wireless_space.h
Merge branch 'master' of git://git.denx.de/u-boot-arc
[u-boot] / include / configs / wireless_space.h
1 /*
2  * Copyright (C) 2011 Albert ARIBAUD <albert.u.boot@aribaud.net>
3  *
4  * Based on the netspace_v2 code which is
5  * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
6  *
7  * SPDX-License-Identifier:     GPL-2.0+
8  */
9
10 #ifndef _CONFIG_WIRELESS_SPACE_H
11 #define _CONFIG_WIRELESS_SPACE_H
12
13 /*
14  * Machine number definition
15  */
16 #define MACH_TYPE_WIRELESS_SPACE        2500 /* is missing in mach-types.h */
17 #define CONFIG_MACH_TYPE                MACH_TYPE_WIRELESS_SPACE
18 #define CONFIG_IDENT_STRING             " Wireless Space"
19
20 /*
21  * High Level Configuration Options (easy to change)
22  */
23 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
24 /* SoC name */
25 #define CONFIG_KW88F6281
26 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
27
28 /*
29  * Commands configuration
30  */
31 #define CONFIG_SYS_NO_FLASH             /* no NOR or SPI flash */
32 #include <config_cmd_default.h>
33 #define CONFIG_CMD_ENV
34 #define CONFIG_CMD_DHCP
35 #define CONFIG_CMD_PING
36 #define CONFIG_CMD_NAND
37 #define CONFIG_CMD_I2C
38 #define CONFIG_CMD_IDE
39 #define CONFIG_CMD_USB
40
41 /*
42  * Core clock definition
43  */
44 #define CONFIG_SYS_TCLK                 166000000 /* 166MHz */
45
46 /*
47  * SDRAM configuration
48  */
49 #define CONFIG_NR_DRAM_BANKS            1
50
51 /*
52  * Different SDRAM configuration and size for some of the boards derived
53  * from the Network Space v2
54  */
55
56 /*
57  * mv-common.h should be defined after CMD configs since it used them
58  * to enable certain macros
59  */
60 #include "mv-common.h"
61
62 /* Remove or override few declarations from mv-common.h */
63 #undef CONFIG_RBTREE
64 #undef CONFIG_SYS_IDE_MAXBUS
65 #undef CONFIG_SYS_IDE_MAXDEVICE
66 #define CONFIG_SYS_IDE_MAXBUS           1
67 #define CONFIG_SYS_IDE_MAXDEVICE        1
68 #undef CONFIG_SYS_PROMPT
69 #define CONFIG_SYS_PROMPT               "ws> "
70
71 /*
72  * Ethernet Driver configuration
73  */
74 #ifdef CONFIG_CMD_NET
75 #define CONFIG_MISC_INIT_R /* misc_init_r() initializes MAC address */
76 #define CONFIG_MVGBE_PORTS      {1, 0}  /* enable only egiga0... */
77 #define PORT_SERIAL_CONTROL_VALUE 0x00A4260E /* ... tied to the switch... */
78 #define CONFIG_PHY_BASE_ADR 0xa         /* ... through a 'fake' PHY */
79 #define CONFIG_MII
80 #undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
81 #define CONFIG_NETCONSOLE
82 #define CONFIG_MV88E61XX_SWITCH
83 #define CONFIG_MV88E61XX_MULTICHIP_ADRMODE
84 #define CONFIG_MV88E61XX_CMD
85 #define CONFIG_CMD_TFTPPUT
86 #endif /* CONFIG_CMD_NET */
87
88 /*
89  * SATA Driver configuration
90  */
91 #ifdef CONFIG_MVSATA_IDE
92 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
93 #endif /* CONFIG_MVSATA_IDE */
94
95 /*
96  * Enable GPI0 support
97  */
98 #define CONFIG_KIRKWOOD_GPIO
99
100 /*
101  * Enable I2C support
102  */
103 #ifdef CONFIG_CMD_I2C
104 /* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */
105 #define CONFIG_CMD_EEPROM
106 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
107 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       4 /* 16-byte page size */
108 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1 /* 8-bit device address */
109 #endif /* CONFIG_CMD_I2C */
110
111 /*
112  * Partition support
113  */
114 #define CONFIG_DOS_PARTITION
115 #define CONFIG_EFI_PARTITION
116
117 /*
118  * File systems support
119  */
120 #define CONFIG_CMD_EXT2
121 #define CONFIG_CMD_FAT
122
123 /*
124  * Use the HUSH parser
125  */
126 #define CONFIG_SYS_HUSH_PARSER
127
128 /*
129  * Console configuration
130  */
131 #define CONFIG_CONSOLE_MUX
132 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
133
134 /*
135  * Enable device tree support
136  */
137 #define CONFIG_OF_LIBFDT
138
139 /*
140  * Environment variables configurations
141  */
142
143 #define CONFIG_ENV_IS_IN_NAND
144 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128KB */
145 #define CONFIG_ENV_SIZE                 0x20000 /* 128KB */
146 #define CONFIG_ENV_OFFSET               0x80000 /* env starts here */
147
148 /*
149  * Board-specific command to make using buttons etc easier
150  */
151
152 #define CONFIG_WIRELESS_SPACE_CMD
153
154 /*
155  * Default environment variables
156  */
157 #define CONFIG_PREBOOT
158
159 #define CONFIG_BOOTARGS "console=ttyS0,115200"
160
161 #define CONFIG_BOOTCOMMAND                                      \
162         "if run usbload || run diskload; then bootm; fi"
163
164 #define CONFIG_EXTRA_ENV_SETTINGS                               \
165         "stdin=serial\0"                                        \
166         "stdout=serial\0"                                       \
167         "stderr=serial\0"                                       \
168         "bootfile=uImage\0"                                     \
169         "loadaddr=0x800000\0"                                   \
170         "autoload=no\0"                                         \
171         "netconsole="                                           \
172                 "set stdin $stdin,nc; "                         \
173                 "set stdout $stdout,nc; "                       \
174                 "set stderr $stderr,nc;\0"                      \
175         "diskload=ide reset && "                                \
176                 "ext2load ide 0:1 $loadaddr /boot/$bootfile\0"  \
177         "usbload=usb start && "                                 \
178                 "fatload usb 0:1 $loadaddr /boot/$bootfile\0"   \
179         "preboot="                                              \
180                 "dhcp && run netconsole\0"
181
182 #endif /* _CONFIG_WIRELESS_SPACE_H */