git.sur5r.net Git - u-boot/blob - include/configs/wireless_space.h

   1 /*
   2  * Copyright (C) 2011 Albert ARIBAUD <albert.u.boot@aribaud.net>
   3  *
   4  * Based on the netspace_v2 code which is
   5  * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef _CONFIG_WIRELESS_SPACE_H
  11 #define _CONFIG_WIRELESS_SPACE_H
  12
  13 /*
  14  * Machine number definition
  15  */
  16 #define MACH_TYPE_WIRELESS_SPACE        2500 /* is missing in mach-types.h */
  17 #define CONFIG_MACH_TYPE                MACH_TYPE_WIRELESS_SPACE
  18 #define CONFIG_IDENT_STRING             " Wireless Space"
  19
  20 /*
  21  * High Level Configuration Options (easy to change)
  22  */
  23 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  24 /* SoC name */
  25 #define CONFIG_KW88F6281
  26 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  27
  28 /*
  29  * Commands configuration
  30  */
  31 #define CONFIG_SYS_NO_FLASH             /* no NOR or SPI flash */
  32 #define CONFIG_CMD_ENV
  33 #define CONFIG_CMD_DHCP
  34 #define CONFIG_CMD_PING
  35 #define CONFIG_CMD_NAND
  36 #define CONFIG_CMD_I2C
  37 #define CONFIG_CMD_IDE
  38 #define CONFIG_CMD_USB
  39
  40 /*
  41  * Core clock definition
  42  */
  43 #define CONFIG_SYS_TCLK                 166000000 /* 166MHz */
  44
  45 /*
  46  * SDRAM configuration
  47  */
  48 #define CONFIG_NR_DRAM_BANKS            1
  49
  50 /*
  51  * Different SDRAM configuration and size for some of the boards derived
  52  * from the Network Space v2
  53  */
  54
  55 /*
  56  * mv-common.h should be defined after CMD configs since it used them
  57  * to enable certain macros
  58  */
  59 #include "mv-common.h"
  60
  61 /* Remove or override few declarations from mv-common.h */
  62 #undef CONFIG_RBTREE
  63 #undef CONFIG_SYS_IDE_MAXBUS
  64 #undef CONFIG_SYS_IDE_MAXDEVICE
  65 #define CONFIG_SYS_IDE_MAXBUS           1
  66 #define CONFIG_SYS_IDE_MAXDEVICE        1
  67 #undef CONFIG_SYS_PROMPT
  68 #define CONFIG_SYS_PROMPT               "ws> "
  69
  70 /*
  71  * Ethernet Driver configuration
  72  */
  73 #ifdef CONFIG_CMD_NET
  74 #define CONFIG_MISC_INIT_R /* misc_init_r() initializes MAC address */
  75 #define CONFIG_MVGBE_PORTS      {1, 0}  /* enable only egiga0... */
  76 #define PORT_SERIAL_CONTROL_VALUE 0x00A4260E /* ... tied to the switch... */
  77 #define CONFIG_PHY_BASE_ADR 0xa         /* ... through a 'fake' PHY */
  78 #define CONFIG_MII
  79 #undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  80 #define CONFIG_NETCONSOLE
  81 #define CONFIG_MV88E61XX_SWITCH
  82 #define CONFIG_MV88E61XX_MULTICHIP_ADRMODE
  83 #define CONFIG_MV88E61XX_CMD
  84 #define CONFIG_CMD_TFTPPUT
  85 #endif /* CONFIG_CMD_NET */
  86
  87 /*
  88  * SATA Driver configuration
  89  */
  90 #ifdef CONFIG_MVSATA_IDE
  91 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
  92 #endif /* CONFIG_MVSATA_IDE */
  93
  94 /*
  95  * Enable GPI0 support
  96  */
  97 #define CONFIG_KIRKWOOD_GPIO
  98
  99 /*
 100  * Enable I2C support
 101  */
 102 #ifdef CONFIG_CMD_I2C
 103 /* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */
 104 #define CONFIG_CMD_EEPROM
 105 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
 106 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       4 /* 16-byte page size */
 107 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1 /* 8-bit device address */
 108 #endif /* CONFIG_CMD_I2C */
 109
 110 /*
 111  * Partition support
 112  */
 113 #define CONFIG_DOS_PARTITION
 114 #define CONFIG_EFI_PARTITION
 115
 116 /*
 117  * File systems support
 118  */
 119 #define CONFIG_CMD_EXT2
 120 #define CONFIG_CMD_FAT
 121
 122 /*
 123  * Use the HUSH parser
 124  */
 125 #define CONFIG_SYS_HUSH_PARSER
 126
 127 /*
 128  * Console configuration
 129  */
 130 #define CONFIG_CONSOLE_MUX
 131 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 132
 133 /*
 134  * Enable device tree support
 135  */
 136 #define CONFIG_OF_LIBFDT
 137
 138 /*
 139  * Environment variables configurations
 140  */
 141
 142 #define CONFIG_ENV_IS_IN_NAND
 143 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128KB */
 144 #define CONFIG_ENV_SIZE                 0x20000 /* 128KB */
 145 #define CONFIG_ENV_OFFSET               0x80000 /* env starts here */
 146
 147 /*
 148  * Board-specific command to make using buttons etc easier
 149  */
 150
 151 #define CONFIG_WIRELESS_SPACE_CMD
 152
 153 /*
 154  * Default environment variables
 155  */
 156 #define CONFIG_PREBOOT
 157
 158 #define CONFIG_BOOTARGS "console=ttyS0,115200"
 159
 160 #define CONFIG_BOOTCOMMAND                                      \
 161         "if run usbload || run diskload; then bootm; fi"
 162
 163 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 164         "stdin=serial\0"                                        \
 165         "stdout=serial\0"                                       \
 166         "stderr=serial\0"                                       \
 167         "bootfile=uImage\0"                                     \
 168         "loadaddr=0x800000\0"                                   \
 169         "autoload=no\0"                                         \
 170         "netconsole="                                           \
 171                 "set stdin $stdin,nc; "                         \
 172                 "set stdout $stdout,nc; "                       \
 173                 "set stderr $stderr,nc;\0"                      \
 174         "diskload=ide reset && "                                \
 175                 "ext2load ide 0:1 $loadaddr /boot/$bootfile\0"  \
 176         "usbload=usb start && "                                 \
 177                 "fatload usb 0:1 $loadaddr /boot/$bootfile\0"   \
 178         "preboot="                                              \
 179                 "dhcp && run netconsole\0"
 180
 181 #endif /* _CONFIG_WIRELESS_SPACE_H */