git.sur5r.net Git - u-boot/blob - include/configs/wireless_space.h

   1 /*
   2  * Copyright (C) 2011 Albert ARIBAUD <albert.u.boot@aribaud.net>
   3  *
   4  * Based on the netspace_v2 code which is
   5  * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef _CONFIG_WIRELESS_SPACE_H
  11 #define _CONFIG_WIRELESS_SPACE_H
  12
  13 /*
  14  * Machine number definition
  15  */
  16 #define MACH_TYPE_WIRELESS_SPACE        2500 /* is missing in mach-types.h */
  17 #define CONFIG_MACH_TYPE                MACH_TYPE_WIRELESS_SPACE
  18 #define CONFIG_IDENT_STRING             " Wireless Space"
  19
  20 /*
  21  * High Level Configuration Options (easy to change)
  22  */
  23 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  24 #define CONFIG_KIRKWOOD                 /* SoC Family Name */
  25 /* SoC name */
  26 #define CONFIG_KW88F6281
  27 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  28
  29 /*
  30  * Commands configuration
  31  */
  32 #define CONFIG_SYS_NO_FLASH             /* no NOR or SPI flash */
  33 #include <config_cmd_default.h>
  34 #define CONFIG_CMD_ENV
  35 #define CONFIG_CMD_DHCP
  36 #define CONFIG_CMD_PING
  37 #define CONFIG_CMD_NAND
  38 #define CONFIG_CMD_I2C
  39 #define CONFIG_CMD_IDE
  40 #define CONFIG_CMD_USB
  41
  42 /*
  43  * Core clock definition
  44  */
  45 #define CONFIG_SYS_TCLK                 166000000 /* 166MHz */
  46
  47 /*
  48  * SDRAM configuration
  49  */
  50 #define CONFIG_NR_DRAM_BANKS            1
  51
  52 /*
  53  * Different SDRAM configuration and size for some of the boards derived
  54  * from the Network Space v2
  55  */
  56
  57 /*
  58  * mv-common.h should be defined after CMD configs since it used them
  59  * to enable certain macros
  60  */
  61 #include "mv-common.h"
  62
  63 /* Remove or override few declarations from mv-common.h */
  64 #undef CONFIG_RBTREE
  65 #undef CONFIG_SYS_IDE_MAXBUS
  66 #undef CONFIG_SYS_IDE_MAXDEVICE
  67 #define CONFIG_SYS_IDE_MAXBUS           1
  68 #define CONFIG_SYS_IDE_MAXDEVICE        1
  69 #undef CONFIG_SYS_PROMPT
  70 #define CONFIG_SYS_PROMPT               "ws> "
  71
  72 /*
  73  * Ethernet Driver configuration
  74  */
  75 #ifdef CONFIG_CMD_NET
  76 #define CONFIG_MISC_INIT_R /* misc_init_r() initializes MAC address */
  77 #define CONFIG_MVGBE_PORTS      {1, 0}  /* enable only egiga0... */
  78 #define PORT_SERIAL_CONTROL_VALUE 0x00A4260E /* ... tied to the switch... */
  79 #define CONFIG_PHY_BASE_ADR 0xa         /* ... through a 'fake' PHY */
  80 #define CONFIG_MII
  81 #undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  82 #define CONFIG_NETCONSOLE
  83 #define CONFIG_MV88E61XX_SWITCH
  84 #define CONFIG_MV88E61XX_MULTICHIP_ADRMODE
  85 #define CONFIG_MV88E61XX_CMD
  86 #define CONFIG_CMD_TFTPPUT
  87 #endif /* CONFIG_CMD_NET */
  88
  89 /*
  90  * SATA Driver configuration
  91  */
  92 #ifdef CONFIG_MVSATA_IDE
  93 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
  94 #endif /* CONFIG_MVSATA_IDE */
  95
  96 /*
  97  * Enable GPI0 support
  98  */
  99 #define CONFIG_KIRKWOOD_GPIO
 100
 101 /*
 102  * Enable I2C support
 103  */
 104 #ifdef CONFIG_CMD_I2C
 105 /* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */
 106 #define CONFIG_CMD_EEPROM
 107 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
 108 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       4 /* 16-byte page size */
 109 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1 /* 8-bit device address */
 110 #endif /* CONFIG_CMD_I2C */
 111
 112 /*
 113  * Partition support
 114  */
 115 #define CONFIG_DOS_PARTITION
 116 #define CONFIG_EFI_PARTITION
 117
 118 /*
 119  * File systems support
 120  */
 121 #define CONFIG_CMD_EXT2
 122 #define CONFIG_CMD_FAT
 123
 124 /*
 125  * Use the HUSH parser
 126  */
 127 #define CONFIG_SYS_HUSH_PARSER
 128
 129 /*
 130  * Console configuration
 131  */
 132 #define CONFIG_CONSOLE_MUX
 133 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 134
 135 /*
 136  * Enable device tree support
 137  */
 138 #define CONFIG_OF_LIBFDT
 139
 140 /*
 141  * Environment variables configurations
 142  */
 143
 144 #define CONFIG_ENV_IS_IN_NAND
 145 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128KB */
 146 #define CONFIG_ENV_SIZE                 0x20000 /* 128KB */
 147 #define CONFIG_ENV_OFFSET               0x80000 /* env starts here */
 148
 149 /*
 150  * Board-specific command to make using buttons etc easier
 151  */
 152
 153 #define CONFIG_WIRELESS_SPACE_CMD
 154
 155 /*
 156  * Default environment variables
 157  */
 158 #define CONFIG_PREBOOT
 159
 160 #define CONFIG_BOOTARGS "console=ttyS0,115200"
 161
 162 #define CONFIG_BOOTCOMMAND                                      \
 163         "if run usbload || run diskload; then bootm; fi"
 164
 165 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 166         "stdin=serial\0"                                        \
 167         "stdout=serial\0"                                       \
 168         "stderr=serial\0"                                       \
 169         "bootfile=uImage\0"                                     \
 170         "loadaddr=0x800000\0"                                   \
 171         "autoload=no\0"                                         \
 172         "netconsole="                                           \
 173                 "set stdin $stdin,nc; "                         \
 174                 "set stdout $stdout,nc; "                       \
 175                 "set stderr $stderr,nc;\0"                      \
 176         "diskload=ide reset && "                                \
 177                 "ext2load ide 0:1 $loadaddr /boot/$bootfile\0"  \
 178         "usbload=usb start && "                                 \
 179                 "fatload usb 0:1 $loadaddr /boot/$bootfile\0"   \
 180         "preboot="                                              \
 181                 "dhcp && run netconsole\0"
 182
 183 #endif /* _CONFIG_WIRELESS_SPACE_H */