]> git.sur5r.net Git - u-boot/blob - include/configs/wireless_space.h
Move defaults from config_cmd_default.h to Kconfig
[u-boot] / include / configs / wireless_space.h
1 /*
2  * Copyright (C) 2011 Albert ARIBAUD <albert.u.boot@aribaud.net>
3  *
4  * Based on the netspace_v2 code which is
5  * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
6  *
7  * SPDX-License-Identifier:     GPL-2.0+
8  */
9
10 #ifndef _CONFIG_WIRELESS_SPACE_H
11 #define _CONFIG_WIRELESS_SPACE_H
12
13 /*
14  * Machine number definition
15  */
16 #define MACH_TYPE_WIRELESS_SPACE        2500 /* is missing in mach-types.h */
17 #define CONFIG_MACH_TYPE                MACH_TYPE_WIRELESS_SPACE
18 #define CONFIG_IDENT_STRING             " Wireless Space"
19
20 /*
21  * High Level Configuration Options (easy to change)
22  */
23 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
24 /* SoC name */
25 #define CONFIG_KW88F6281
26 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
27
28 /*
29  * Commands configuration
30  */
31 #define CONFIG_SYS_NO_FLASH             /* no NOR or SPI flash */
32 #define CONFIG_CMD_ENV
33 #define CONFIG_CMD_DHCP
34 #define CONFIG_CMD_PING
35 #define CONFIG_CMD_NAND
36 #define CONFIG_CMD_I2C
37 #define CONFIG_CMD_IDE
38 #define CONFIG_CMD_USB
39
40 /*
41  * Core clock definition
42  */
43 #define CONFIG_SYS_TCLK                 166000000 /* 166MHz */
44
45 /*
46  * SDRAM configuration
47  */
48 #define CONFIG_NR_DRAM_BANKS            1
49
50 /*
51  * Different SDRAM configuration and size for some of the boards derived
52  * from the Network Space v2
53  */
54
55 /*
56  * mv-common.h should be defined after CMD configs since it used them
57  * to enable certain macros
58  */
59 #include "mv-common.h"
60
61 /* Remove or override few declarations from mv-common.h */
62 #undef CONFIG_RBTREE
63 #undef CONFIG_SYS_IDE_MAXBUS
64 #undef CONFIG_SYS_IDE_MAXDEVICE
65 #define CONFIG_SYS_IDE_MAXBUS           1
66 #define CONFIG_SYS_IDE_MAXDEVICE        1
67 #undef CONFIG_SYS_PROMPT
68 #define CONFIG_SYS_PROMPT               "ws> "
69
70 /*
71  * Ethernet Driver configuration
72  */
73 #ifdef CONFIG_CMD_NET
74 #define CONFIG_MISC_INIT_R /* misc_init_r() initializes MAC address */
75 #define CONFIG_MVGBE_PORTS      {1, 0}  /* enable only egiga0... */
76 #define PORT_SERIAL_CONTROL_VALUE 0x00A4260E /* ... tied to the switch... */
77 #define CONFIG_PHY_BASE_ADR 0xa         /* ... through a 'fake' PHY */
78 #define CONFIG_MII
79 #undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
80 #define CONFIG_NETCONSOLE
81 #define CONFIG_MV88E61XX_SWITCH
82 #define CONFIG_MV88E61XX_MULTICHIP_ADRMODE
83 #define CONFIG_MV88E61XX_CMD
84 #define CONFIG_CMD_TFTPPUT
85 #endif /* CONFIG_CMD_NET */
86
87 /*
88  * SATA Driver configuration
89  */
90 #ifdef CONFIG_MVSATA_IDE
91 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
92 #endif /* CONFIG_MVSATA_IDE */
93
94 /*
95  * Enable GPI0 support
96  */
97 #define CONFIG_KIRKWOOD_GPIO
98
99 /*
100  * Enable I2C support
101  */
102 #ifdef CONFIG_CMD_I2C
103 /* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */
104 #define CONFIG_CMD_EEPROM
105 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
106 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       4 /* 16-byte page size */
107 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1 /* 8-bit device address */
108 #endif /* CONFIG_CMD_I2C */
109
110 /*
111  * Partition support
112  */
113 #define CONFIG_DOS_PARTITION
114 #define CONFIG_EFI_PARTITION
115
116 /*
117  * File systems support
118  */
119 #define CONFIG_CMD_EXT2
120 #define CONFIG_CMD_FAT
121
122 /*
123  * Use the HUSH parser
124  */
125 #define CONFIG_SYS_HUSH_PARSER
126
127 /*
128  * Console configuration
129  */
130 #define CONFIG_CONSOLE_MUX
131 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
132
133 /*
134  * Enable device tree support
135  */
136 #define CONFIG_OF_LIBFDT
137
138 /*
139  * Environment variables configurations
140  */
141
142 #define CONFIG_ENV_IS_IN_NAND
143 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128KB */
144 #define CONFIG_ENV_SIZE                 0x20000 /* 128KB */
145 #define CONFIG_ENV_OFFSET               0x80000 /* env starts here */
146
147 /*
148  * Board-specific command to make using buttons etc easier
149  */
150
151 #define CONFIG_WIRELESS_SPACE_CMD
152
153 /*
154  * Default environment variables
155  */
156 #define CONFIG_PREBOOT
157
158 #define CONFIG_BOOTARGS "console=ttyS0,115200"
159
160 #define CONFIG_BOOTCOMMAND                                      \
161         "if run usbload || run diskload; then bootm; fi"
162
163 #define CONFIG_EXTRA_ENV_SETTINGS                               \
164         "stdin=serial\0"                                        \
165         "stdout=serial\0"                                       \
166         "stderr=serial\0"                                       \
167         "bootfile=uImage\0"                                     \
168         "loadaddr=0x800000\0"                                   \
169         "autoload=no\0"                                         \
170         "netconsole="                                           \
171                 "set stdin $stdin,nc; "                         \
172                 "set stdout $stdout,nc; "                       \
173                 "set stderr $stderr,nc;\0"                      \
174         "diskload=ide reset && "                                \
175                 "ext2load ide 0:1 $loadaddr /boot/$bootfile\0"  \
176         "usbload=usb start && "                                 \
177                 "fatload usb 0:1 $loadaddr /boot/$bootfile\0"   \
178         "preboot="                                              \
179                 "dhcp && run netconsole\0"
180
181 #endif /* _CONFIG_WIRELESS_SPACE_H */