3 * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
4 * This work has been supported by: QTechnology http://qtec.com/
7 * Georg Schardt <schardt@team-ctech.de>
9 * SPDX-License-Identifier: GPL-2.0+
12 #ifndef __CONFIG_XLX_H
13 #define __CONFIG_XLX_H
21 #define CONFIG_SYS_SDRAM_BASE 0x0
22 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
23 #define CONFIG_SYS_MONITOR_LEN (192 * 1024)
24 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
27 #define CONFIG_CMD_IRQ
28 #define CONFIG_CMD_REGINFO
29 #undef CONFIG_CMD_JFFS2
30 #undef CONFIG_CMD_MTDPARTS
32 #undef CONFIG_CMD_EEPROM
35 #define CONFIG_SYS_LONGHELP /* undef to save memory */
36 #if defined(CONFIG_CMD_KGDB)
37 #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */
39 #define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */
41 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE +\
42 sizeof(CONFIG_SYS_PROMPT) + 16)
43 #define CONFIG_SYS_MAXARGS 16
44 /* max number of command args */
45 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
46 /* Boot Argument Buffer Size */
47 #define CONFIG_SYS_MEMTEST_START 0x00400000
48 /* memtest works on */
49 #define CONFIG_SYS_MEMTEST_END 0x00C00000
50 /* 4 ... 12 MB in DRAM */
51 #define CONFIG_SYS_LOAD_ADDR 0x00400000
52 /* default load address */
53 #define CONFIG_SYS_EXTBDINFO 1
54 /* Extended board_into (bd_t) */
55 /* decrementer freq: 1 ms ticks */
56 #define CONFIG_CMDLINE_EDITING /* add command line history */
57 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */
58 #define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */
59 #define CONFIG_LOADS_ECHO /* echo on for serial download */
60 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
61 #define CONFIG_SYS_BOOTMAPSZ (8 << 20)
62 /* Initial Memory map for Linux */
65 #define CONFIG_SYS_INIT_RAM_ADDR 0x800000/* Initial RAM address */
66 #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */
67 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \
68 - GENERATED_GBL_DATA_SIZE)
69 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
71 #define CONFIG_SYS_CLK_FREQ XPAR_CORE_CLOCK_FREQ_HZ
74 #ifdef XPAR_FLASH_MEM0_BASEADDR
75 #define CONFIG_SYS_FLASH_BASE XPAR_FLASH_MEM0_BASEADDR
76 #define CONFIG_SYS_FLASH_CFI 1
77 #define CONFIG_FLASH_CFI_DRIVER 1
78 #define CONFIG_SYS_FLASH_EMPTY_INFO 1
79 #define CONFIG_SYS_MAX_FLASH_BANKS 1
80 #define CONFIG_SYS_FLASH_PROTECTION
81 #define CONFIG_CMD_JFFS2
82 #define CONFIG_CMD_MTDPARTS
83 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
84 #define CONFIG_FLASH_CFI_MTD
86 #define CONFIG_ENV_IS_NOWHERE
89 /* The following table includes the supported baudrates */
90 # define CONFIG_SYS_BAUDRATE_TABLE \
91 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
93 #endif /* __CONFIG_H */