3 * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
4 * This work has been supported by: QTechnology http://qtec.com/
7 * Georg Schardt <schardt@team-ctech.de>
9 * SPDX-License-Identifier: GPL-2.0+
12 #ifndef __CONFIG_XLX_H
13 #define __CONFIG_XLX_H
21 #define CONFIG_SYS_SDRAM_BASE 0x0
22 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
23 #define CONFIG_SYS_MONITOR_LEN (192 * 1024)
24 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
27 #define CONFIG_CMD_ASKENV
28 #define CONFIG_CMD_CACHE
29 #define CONFIG_CMD_DIAG
30 #define CONFIG_CMD_IRQ
31 #define CONFIG_CMD_REGINFO
32 #undef CONFIG_CMD_JFFS2
33 #undef CONFIG_CMD_MTDPARTS
35 #undef CONFIG_CMD_EEPROM
38 #define CONFIG_BOOTDELAY 5/* autoboot after 5 seconds */
39 #define CONFIG_SYS_LONGHELP /* undef to save memory */
40 #if defined(CONFIG_CMD_KGDB)
41 #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */
43 #define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */
45 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE +\
46 sizeof(CONFIG_SYS_PROMPT) + 16)
47 #define CONFIG_SYS_MAXARGS 16
48 /* max number of command args */
49 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
50 /* Boot Argument Buffer Size */
51 #define CONFIG_SYS_MEMTEST_START 0x00400000
52 /* memtest works on */
53 #define CONFIG_SYS_MEMTEST_END 0x00C00000
54 /* 4 ... 12 MB in DRAM */
55 #define CONFIG_SYS_LOAD_ADDR 0x00400000
56 /* default load address */
57 #define CONFIG_SYS_EXTBDINFO 1
58 /* Extended board_into (bd_t) */
59 /* decrementer freq: 1 ms ticks */
60 #define CONFIG_CMDLINE_EDITING /* add command line history */
61 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */
62 #define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */
63 #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
64 #define CONFIG_VERSION_VARIABLE /* include version env variable */
65 #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */
66 #define CONFIG_LOADS_ECHO /* echo on for serial download */
67 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
68 #define CONFIG_SYS_BOOTMAPSZ (8 << 20)
69 /* Initial Memory map for Linux */
72 #define CONFIG_SYS_INIT_RAM_ADDR 0x800000/* Initial RAM address */
73 #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */
74 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \
75 - GENERATED_GBL_DATA_SIZE)
76 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
78 #define CONFIG_SYS_CLK_FREQ XPAR_CORE_CLOCK_FREQ_HZ
81 #ifdef XPAR_FLASH_MEM0_BASEADDR
82 #define CONFIG_SYS_FLASH_BASE XPAR_FLASH_MEM0_BASEADDR
83 #define CONFIG_SYS_FLASH_CFI 1
84 #define CONFIG_FLASH_CFI_DRIVER 1
85 #define CONFIG_SYS_FLASH_EMPTY_INFO 1
86 #define CONFIG_SYS_MAX_FLASH_BANKS 1
87 #define CONFIG_SYS_FLASH_PROTECTION
88 #define CONFIG_CMD_JFFS2
89 #define CONFIG_CMD_MTDPARTS
90 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
91 #define CONFIG_FLASH_CFI_MTD
93 #define CONFIG_ENV_IS_NOWHERE
94 #define CONFIG_SYS_NO_FLASH
97 #define CONFIG_BAUDRATE 115200
98 /* The following table includes the supported baudrates */
99 # define CONFIG_SYS_BAUDRATE_TABLE \
100 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
102 #endif /* __CONFIG_H */