2 * Watchdog driver for the FTWDT010 Watch Dog Driver
4 * (c) Copyright 2004 Faraday Technology Corp. (www.faraday-tech.com)
5 * Based on sa1100_wdt.c by Oleg Drokin <green@crimea.edu>
6 * Based on SoftDog driver by Alan Cox <alan@redhat.com>
8 * Copyright (C) 2011 Andes Technology Corporation
9 * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
11 * SPDX-License-Identifier: GPL-2.0+
13 * 27/11/2004 Initial release, Faraday.
14 * 12/01/2011 Port to u-boot, Macpaul Lin.
21 unsigned int wdcounter; /* Counter Reg - 0x00 */
22 unsigned int wdload; /* Counter Auto Reload Reg - 0x04 */
23 unsigned int wdrestart; /* Counter Restart Reg - 0x08 */
24 unsigned int wdcr; /* Control Reg - 0x0c */
25 unsigned int wdstatus; /* Status Reg - 0x10 */
26 unsigned int wdclear; /* Timer Clear - 0x14 */
27 unsigned int wdintrlen; /* Interrupt Length - 0x18 */
31 * WDLOAD - Counter Auto Reload Register
32 * The Auto Reload Register is set to 0x03EF1480 (66Mhz) by default.
33 * Which means in a 66MHz system, the period of Watch Dog timer reset is
36 #define FTWDT010_WDLOAD(x) ((x) & 0xffffffff)
39 * WDRESTART - Watch Dog Timer Counter Restart Register
40 * If writing 0x5AB9 to WDRESTART register, Watch Dog timer will
41 * automatically reload WDLOAD to WDCOUNTER and restart counting.
43 #define FTWDT010_WDRESTART_MAGIC 0x5AB9
45 /* WDCR - Watch Dog Timer Control Register */
46 #define FTWDT010_WDCR_ENABLE (1 << 0)
47 #define FTWDT010_WDCR_RST (1 << 1)
48 #define FTWDT010_WDCR_INTR (1 << 2)
49 /* FTWDT010_WDCR_EXT bit: Watch Dog Timer External Signal Enable */
50 #define FTWDT010_WDCR_EXT (1 << 3)
51 /* FTWDT010_WDCR_CLOCK bit: Clock Source: 0: PCLK, 1: EXTCLK.
52 * The clock source PCLK cannot be gated when system sleeps, even if
53 * WDCLOCK bit is turned on.
55 * Faraday's Watch Dog timer can be driven by an external clock. The
56 * programmer just needs to write one to WdCR[WdClock] bit.
58 * Note: There is a limitation between EXTCLK and PCLK:
59 * EXTCLK cycle time / PCLK cycle time > 2.
60 * If the system does not need an external clock,
61 * just keep WdCR[WdClock] bit in its default value.
63 #define FTWDT010_WDCR_CLOCK (1 << 4)
66 * WDSTATUS - Watch Dog Timer Status Register
67 * This bit is set when the counter reaches Zero
69 #define FTWDT010_WDSTATUS(x) ((x) & 0x1)
72 * WDCLEAR - Watch Dog Timer Clear Register
73 * Writing one to this register will clear WDSTATUS.
75 #define FTWDT010_WDCLEAR (1 << 0)
78 * WDINTRLEN - Watch Dog Timer Interrupt Length
79 * This register controls the duration length of wd_rst, wd_intr and wd_ext.
80 * The default value is 0xFF.
82 #define FTWDT010_WDINTRLEN(x) ((x) & 0xff)
85 * Variable timeout should be set in ms.
86 * (CONFIG_SYS_CLK_FREQ/1000) equals 1 ms.
87 * WDLOAD = timeout * TIMEOUT_FACTOR.
89 #define FTWDT010_TIMEOUT_FACTOR (CONFIG_SYS_CLK_FREQ / 1000) /* 1 ms */
91 void ftwdt010_wdt_reset(void);
92 void ftwdt010_wdt_disable(void);
94 #endif /* __FTWDT010_H */