1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org> et al.
11 #include <linux/compat.h>
14 #include <linux/compiler.h>
16 struct erase_info_user {
21 struct erase_info_user64 {
29 unsigned char __user *ptr;
32 struct mtd_oob_buf64 {
42 * @MTD_OPS_PLACE_OOB: OOB data are placed at the given offset (default)
43 * @MTD_OPS_AUTO_OOB: OOB data are automatically placed at the free areas
44 * which are defined by the internal ecclayout
45 * @MTD_OPS_RAW: data are transferred as-is, with no error correction;
46 * this mode implies %MTD_OPS_PLACE_OOB
48 * These modes can be passed to ioctl(MEMWRITE) and are also used internally.
49 * See notes on "MTD file modes" for discussion on %MTD_OPS_RAW vs.
53 MTD_OPS_PLACE_OOB = 0,
59 * struct mtd_write_req - data structure for requesting a write operation
61 * @start: start address
62 * @len: length of data buffer
63 * @ooblen: length of OOB buffer
64 * @usr_data: user-provided data buffer
65 * @usr_oob: user-provided OOB buffer
66 * @mode: MTD mode (see "MTD operation modes")
67 * @padding: reserved, must be set to 0
69 * This structure supports ioctl(MEMWRITE) operations, allowing data and/or OOB
70 * writes in various modes. To write to OOB-only, set @usr_data == NULL, and to
71 * write data-only, set @usr_oob == NULL. However, setting both @usr_data and
72 * @usr_oob to NULL is not allowed.
74 struct mtd_write_req {
87 #define MTD_NORFLASH 3
88 #define MTD_NANDFLASH 4 /* SLC NAND */
89 #define MTD_DATAFLASH 6
90 #define MTD_UBIVOLUME 7
91 #define MTD_MLCNANDFLASH 8 /* MLC NAND (including TLC) */
93 #define MTD_WRITEABLE 0x400 /* Device is writeable */
94 #define MTD_BIT_WRITEABLE 0x800 /* Single bits can be flipped */
95 #define MTD_NO_ERASE 0x1000 /* No erase necessary */
96 #define MTD_POWERUP_LOCK 0x2000 /* Always locked after reset */
98 /* Some common devices / combinations of capabilities */
100 #define MTD_CAP_RAM (MTD_WRITEABLE | MTD_BIT_WRITEABLE | MTD_NO_ERASE)
101 #define MTD_CAP_NORFLASH (MTD_WRITEABLE | MTD_BIT_WRITEABLE)
102 #define MTD_CAP_NANDFLASH (MTD_WRITEABLE)
104 /* Obsolete ECC byte placement modes (used with obsolete MEMGETOOBSEL) */
105 #define MTD_NANDECC_OFF 0 // Switch off ECC (Not recommended)
106 #define MTD_NANDECC_PLACE 1 // Use the given placement in the structure (YAFFS1 legacy mode)
107 #define MTD_NANDECC_AUTOPLACE 2 // Use the default placement scheme
108 #define MTD_NANDECC_PLACEONLY 3 // Use the given placement in the structure (Do not store ecc result on read)
109 #define MTD_NANDECC_AUTOPL_USR 4 // Use the given autoplacement scheme rather than using the default
111 /* OTP mode selection */
112 #define MTD_OTP_OFF 0
113 #define MTD_OTP_FACTORY 1
114 #define MTD_OTP_USER 2
116 struct mtd_info_user {
119 __u32 size; /* Total size of the MTD */
122 __u32 oobsize; /* Amount of OOB data per block (e.g. 16) */
123 __u64 padding; /* Old obsolete field; do not use */
126 struct region_info_user {
127 __u32 offset; /* At which this region starts,
128 * from the beginning of the MTD */
129 __u32 erasesize; /* For this region */
130 __u32 numblocks; /* Number of blocks in this region */
141 * Note, the following ioctl existed in the past and was removed:
142 * #define MEMSETOOBSEL _IOW('M', 9, struct nand_oobinfo)
143 * Try to avoid adding a new ioctl with the same ioctl number.
146 /* Get basic MTD characteristics info (better to use sysfs) */
147 #define MEMGETINFO _IOR('M', 1, struct mtd_info_user)
148 /* Erase segment of MTD */
149 #define MEMERASE _IOW('M', 2, struct erase_info_user)
150 /* Write out-of-band data from MTD */
151 #define MEMWRITEOOB _IOWR('M', 3, struct mtd_oob_buf)
152 /* Read out-of-band data from MTD */
153 #define MEMREADOOB _IOWR('M', 4, struct mtd_oob_buf)
154 /* Lock a chip (for MTD that supports it) */
155 #define MEMLOCK _IOW('M', 5, struct erase_info_user)
156 /* Unlock a chip (for MTD that supports it) */
157 #define MEMUNLOCK _IOW('M', 6, struct erase_info_user)
158 /* Get the number of different erase regions */
159 #define MEMGETREGIONCOUNT _IOR('M', 7, int)
160 /* Get information about the erase region for a specific index */
161 #define MEMGETREGIONINFO _IOWR('M', 8, struct region_info_user)
162 /* Get info about OOB modes (e.g., RAW, PLACE, AUTO) - legacy interface */
163 #define MEMGETOOBSEL _IOR('M', 10, struct nand_oobinfo)
164 /* Check if an eraseblock is bad */
165 #define MEMGETBADBLOCK _IOW('M', 11, __kernel_loff_t)
166 /* Mark an eraseblock as bad */
167 #define MEMSETBADBLOCK _IOW('M', 12, __kernel_loff_t)
168 /* Set OTP (One-Time Programmable) mode (factory vs. user) */
169 #define OTPSELECT _IOR('M', 13, int)
170 /* Get number of OTP (One-Time Programmable) regions */
171 #define OTPGETREGIONCOUNT _IOW('M', 14, int)
172 /* Get all OTP (One-Time Programmable) info about MTD */
173 #define OTPGETREGIONINFO _IOW('M', 15, struct otp_info)
174 /* Lock a given range of user data (must be in mode %MTD_FILE_MODE_OTP_USER) */
175 #define OTPLOCK _IOR('M', 16, struct otp_info)
176 /* Get ECC layout (deprecated) */
177 #define ECCGETLAYOUT _IOR('M', 17, struct nand_ecclayout_user)
178 /* Get statistics about corrected/uncorrected errors */
179 #define ECCGETSTATS _IOR('M', 18, struct mtd_ecc_stats)
180 /* Set MTD mode on a per-file-descriptor basis (see "MTD file modes") */
181 #define MTDFILEMODE _IO('M', 19)
182 /* Erase segment of MTD (supports 64-bit address) */
183 #define MEMERASE64 _IOW('M', 20, struct erase_info_user64)
184 /* Write data to OOB (64-bit version) */
185 #define MEMWRITEOOB64 _IOWR('M', 21, struct mtd_oob_buf64)
186 /* Read data from OOB (64-bit version) */
187 #define MEMREADOOB64 _IOWR('M', 22, struct mtd_oob_buf64)
188 /* Check if chip is locked (for MTD that supports it) */
189 #define MEMISLOCKED _IOR('M', 23, struct erase_info_user)
191 * Most generic write interface; can write in-band and/or out-of-band in various
192 * modes (see "struct mtd_write_req"). This ioctl is not supported for flashes
193 * without OOB, e.g., NOR flash.
195 #define MEMWRITE _IOWR('M', 24, struct mtd_write_req)
198 * Obsolete legacy interface. Keep it in order not to break userspace
201 struct nand_oobinfo {
208 struct nand_oobfree {
213 #define MTD_MAX_OOBFREE_ENTRIES 8
214 #define MTD_MAX_ECCPOS_ENTRIES 64
216 * OBSOLETE: ECC layout control structure. Exported to user-space via ioctl
217 * ECCGETLAYOUT for backwards compatbility and should not be mistaken as a
218 * complete set of ECC information. The ioctl truncates the larger internal
219 * structure to retain binary compatibility with the static declaration of the
220 * ioctl. Note that the "MTD_MAX_..._ENTRIES" macros represent the max size of
221 * the user struct, not the MAX size of the internal struct nand_ecclayout.
223 struct nand_ecclayout_user {
225 __u32 eccpos[MTD_MAX_ECCPOS_ENTRIES];
227 struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES];
231 * struct mtd_ecc_stats - error correction stats
233 * @corrected: number of corrected bits
234 * @failed: number of uncorrectable errors
235 * @badblocks: number of bad blocks in this partition
236 * @bbtblocks: number of blocks reserved for bad block tables
238 struct mtd_ecc_stats {
246 * MTD file modes - for read/write access to MTD
248 * @MTD_FILE_MODE_NORMAL: OTP disabled, ECC enabled
249 * @MTD_FILE_MODE_OTP_FACTORY: OTP enabled in factory mode
250 * @MTD_FILE_MODE_OTP_USER: OTP enabled in user mode
251 * @MTD_FILE_MODE_RAW: OTP disabled, ECC disabled
253 * These modes can be set via ioctl(MTDFILEMODE). The mode mode will be retained
254 * separately for each open file descriptor.
256 * Note: %MTD_FILE_MODE_RAW provides the same functionality as %MTD_OPS_RAW -
257 * raw access to the flash, without error correction or autoplacement schemes.
258 * Wherever possible, the MTD_OPS_* mode will override the MTD_FILE_MODE_* mode
259 * (e.g., when using ioctl(MEMWRITE)), but in some cases, the MTD_FILE_MODE is
260 * used out of necessity (e.g., `write()', ioctl(MEMWRITEOOB64)).
262 enum mtd_file_modes {
263 MTD_FILE_MODE_NORMAL = MTD_OTP_OFF,
264 MTD_FILE_MODE_OTP_FACTORY = MTD_OTP_FACTORY,
265 MTD_FILE_MODE_OTP_USER = MTD_OTP_USER,
269 static inline int mtd_type_is_nand_user(const struct mtd_info_user *mtd)
271 return mtd->type == MTD_NANDFLASH || mtd->type == MTD_MLCNANDFLASH;
274 #endif /* __MTD_ABI_H__ */