]> git.sur5r.net Git - u-boot/blob - include/spl.h
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
[u-boot] / include / spl.h
1 /*
2  * (C) Copyright 2012
3  * Texas Instruments, <www.ti.com>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7 #ifndef _SPL_H_
8 #define _SPL_H_
9
10 /* Platform-specific defines */
11 #include <linux/compiler.h>
12 #include <asm/spl.h>
13
14 /* Value in r0 indicates we booted from U-Boot */
15 #define UBOOT_NOT_LOADED_FROM_SPL       0x13578642
16
17 /* Boot type */
18 #define MMCSD_MODE_UNDEFINED    0
19 #define MMCSD_MODE_RAW          1
20 #define MMCSD_MODE_FS           2
21 #define MMCSD_MODE_EMMCBOOT     3
22
23 struct spl_image_info {
24         const char *name;
25         u8 os;
26         u32 load_addr;
27         u32 entry_point;
28         u32 size;
29         u32 flags;
30 };
31
32 /*
33  * Information required to load data from a device
34  *
35  * @dev: Pointer to the device, e.g. struct mmc *
36  * @priv: Private data for the device
37  * @bl_len: Block length for reading in bytes
38  * @read: Function to call to read from the device
39  */
40 struct spl_load_info {
41         void *dev;
42         void *priv;
43         int bl_len;
44         ulong (*read)(struct spl_load_info *load, ulong sector, ulong count,
45                       void *buf);
46 };
47
48 int spl_load_simple_fit(struct spl_load_info *info, ulong sector, void *fdt);
49
50 #define SPL_COPY_PAYLOAD_ONLY   1
51
52 extern struct spl_image_info spl_image;
53
54 /* SPL common functions */
55 void preloader_console_init(void);
56 u32 spl_boot_device(void);
57 u32 spl_boot_mode(void);
58 void spl_set_header_raw_uboot(void);
59 int spl_parse_image_header(const struct image_header *header);
60 void spl_board_prepare_for_linux(void);
61 void spl_board_prepare_for_boot(void);
62 void __noreturn jump_to_image_linux(void *arg);
63 int spl_start_uboot(void);
64 void spl_display_print(void);
65
66 /* NAND SPL functions */
67 int spl_nand_load_image(void);
68
69 /* OneNAND SPL functions */
70 int spl_onenand_load_image(void);
71
72 /* NOR SPL functions */
73 int spl_nor_load_image(void);
74
75 /* MMC SPL functions */
76 int spl_mmc_load_image(u32 boot_device);
77
78 /* YMODEM SPL functions */
79 int spl_ymodem_load_image(void);
80
81 /* SPI SPL functions */
82 int spl_spi_load_image(void);
83
84 /* Ethernet SPL functions */
85 int spl_net_load_image(const char *device);
86
87 /* USB SPL functions */
88 int spl_usb_load_image(void);
89
90 /* SATA SPL functions */
91 int spl_sata_load_image(void);
92
93 /* SPL FAT image functions */
94 int spl_load_image_fat(struct blk_desc *block_dev, int partition,
95                        const char *filename);
96 int spl_load_image_fat_os(struct blk_desc *block_dev, int partition);
97
98 void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image);
99
100 /* SPL EXT image functions */
101 int spl_load_image_ext(struct blk_desc *block_dev, int partition,
102                        const char *filename);
103 int spl_load_image_ext_os(struct blk_desc *block_dev, int partition);
104
105 /**
106  * spl_init() - Set up device tree and driver model in SPL if enabled
107  *
108  * Call this function in board_init_f() if you want to use device tree and
109  * driver model early, before board_init_r() is called. This function will
110  * be called from board_init_r() if not called earlier.
111  *
112  * If this is not called, then driver model will be inactive in SPL's
113  * board_init_f(), and no device tree will be available.
114  */
115 int spl_init(void);
116
117 #ifdef CONFIG_SPL_BOARD_INIT
118 void spl_board_init(void);
119 #endif
120
121 /**
122  * spl_was_boot_source() - check if U-Boot booted from SPL
123  *
124  * This will normally be true, but if U-Boot jumps to second U-Boot, it will
125  * be false. This should be implemented by board-specific code.
126  *
127  * @return true if U-Boot booted from SPL, else false
128  */
129 bool spl_was_boot_source(void);
130
131 #endif