]> git.sur5r.net Git - u-boot/blob - lib/efi_selftest/efi_selftest_tpl.c
arm64: dts: sun50i: h5: Order nodes in alphabetic for orangepi-prime
[u-boot] / lib / efi_selftest / efi_selftest_tpl.c
1 /*
2  * efi_selftest_events
3  *
4  * Copyright (c) 2017 Heinrich Schuchardt <xypron.glpk@gmx.de>
5  *
6  * SPDX-License-Identifier:     GPL-2.0+
7  *
8  * This unit test uses timer events to check the handling of
9  * task priority levels.
10  */
11
12 #include <efi_selftest.h>
13
14 static struct efi_event *event_notify;
15 static struct efi_event *event_wait;
16 static unsigned int notification_count;
17 static struct efi_boot_services *boottime;
18
19 /*
20  * Notification function, increments the notification count.
21  *
22  * @event       notified event
23  * @context     pointer to the notification count
24  */
25 static void EFIAPI notify(struct efi_event *event, void *context)
26 {
27         unsigned int *count = context;
28
29         if (count)
30                 ++*count;
31 }
32
33 /*
34  * Setup unit test.
35  *
36  * Create two timer events.
37  * One with EVT_NOTIFY_SIGNAL, the other with EVT_NOTIFY_WAIT.
38  *
39  * @handle:     handle of the loaded image
40  * @systable:   system table
41  * @return:     EFI_ST_SUCCESS for success
42  */
43 static int setup(const efi_handle_t handle,
44                  const struct efi_system_table *systable)
45 {
46         efi_status_t ret;
47
48         boottime = systable->boottime;
49
50         ret = boottime->create_event(EVT_TIMER | EVT_NOTIFY_SIGNAL,
51                                      TPL_CALLBACK, notify,
52                                      (void *)&notification_count,
53                                      &event_notify);
54         if (ret != EFI_SUCCESS) {
55                 efi_st_error("could not create event\n");
56                 return EFI_ST_FAILURE;
57         }
58         ret = boottime->create_event(EVT_TIMER | EVT_NOTIFY_WAIT,
59                                      TPL_HIGH_LEVEL, notify, NULL, &event_wait);
60         if (ret != EFI_SUCCESS) {
61                 efi_st_error("could not create event\n");
62                 return EFI_ST_FAILURE;
63         }
64         return EFI_ST_SUCCESS;
65 }
66
67 /*
68  * Tear down unit test.
69  *
70  * Close the events created in setup.
71  *
72  * @return:     EFI_ST_SUCCESS for success
73  */
74 static int teardown(void)
75 {
76         efi_status_t ret;
77
78         if (event_notify) {
79                 ret = boottime->close_event(event_notify);
80                 event_notify = NULL;
81                 if (ret != EFI_SUCCESS) {
82                         efi_st_error("could not close event\n");
83                         return EFI_ST_FAILURE;
84                 }
85         }
86         if (event_wait) {
87                 ret = boottime->close_event(event_wait);
88                 event_wait = NULL;
89                 if (ret != EFI_SUCCESS) {
90                         efi_st_error("could not close event\n");
91                         return EFI_ST_FAILURE;
92                 }
93         }
94         boottime->restore_tpl(TPL_APPLICATION);
95         return EFI_ST_SUCCESS;
96 }
97
98 /*
99  * Execute unit test.
100  *
101  * Run a 10 ms periodic timer and check that it is called 10 times
102  * while waiting for 100 ms single shot timer.
103  *
104  * Raise the TPL level to the level of the 10 ms timer and observe
105  * that the notification function is not called again.
106  *
107  * Lower the TPL level and check that the queued notification
108  * function is called.
109  *
110  * @return:     EFI_ST_SUCCESS for success
111  */
112 static int execute(void)
113 {
114         size_t index;
115         efi_status_t ret;
116         UINTN old_tpl;
117
118         /* Set 10 ms timer */
119         notification_count = 0;
120         ret = boottime->set_timer(event_notify, EFI_TIMER_PERIODIC, 100000);
121         if (ret != EFI_SUCCESS) {
122                 efi_st_error("Could not set timer\n");
123                 return EFI_ST_FAILURE;
124         }
125         /* Set 100 ms timer */
126         ret = boottime->set_timer(event_wait, EFI_TIMER_RELATIVE, 1000000);
127         if (ret != EFI_SUCCESS) {
128                 efi_st_error("Could not set timer\n");
129                 return EFI_ST_FAILURE;
130         }
131         index = 5;
132         ret = boottime->wait_for_event(1, &event_wait, &index);
133         if (ret != EFI_SUCCESS) {
134                 efi_st_error("Could not wait for event\n");
135                 return EFI_ST_FAILURE;
136         }
137         ret = boottime->check_event(event_wait);
138         if (ret != EFI_NOT_READY) {
139                 efi_st_error("Signaled state was not cleared.\n");
140                 efi_st_printf("ret = %u\n", (unsigned int)ret);
141                 return EFI_ST_FAILURE;
142         }
143         if (index != 0) {
144                 efi_st_error("WaitForEvent returned wrong index\n");
145                 return EFI_ST_FAILURE;
146         }
147         efi_st_printf("Notification count with TPL level TPL_APPLICATION: %u\n",
148                       notification_count);
149         if (notification_count < 8 || notification_count > 12) {
150                 efi_st_error("Incorrect timing of events\n");
151                 return EFI_ST_FAILURE;
152         }
153         ret = boottime->set_timer(event_notify, EFI_TIMER_STOP, 0);
154         if (index != 0) {
155                 efi_st_error("Could not cancel timer\n");
156                 return EFI_ST_FAILURE;
157         }
158         /* Raise TPL level */
159         old_tpl = boottime->raise_tpl(TPL_CALLBACK);
160         if (old_tpl != TPL_APPLICATION) {
161                 efi_st_error("Initial TPL level was not TPL_APPLICATION");
162                 return EFI_ST_FAILURE;
163         }
164         /* Set 10 ms timer */
165         notification_count = 0;
166         ret = boottime->set_timer(event_notify, EFI_TIMER_PERIODIC, 100000);
167         if (index != 0) {
168                 efi_st_error("Could not set timer\n");
169                 return EFI_ST_FAILURE;
170         }
171         /* Set 100 ms timer */
172         ret = boottime->set_timer(event_wait, EFI_TIMER_RELATIVE, 1000000);
173         if (ret != EFI_SUCCESS) {
174                 efi_st_error("Could not set timer\n");
175                 return EFI_ST_FAILURE;
176         }
177         do {
178                 ret = boottime->check_event(event_wait);
179         } while (ret == EFI_NOT_READY);
180         if (ret != EFI_SUCCESS) {
181                 efi_st_error("Could not check event\n");
182                 return EFI_ST_FAILURE;
183         }
184         efi_st_printf("Notification count with TPL level TPL_CALLBACK: %u\n",
185                       notification_count);
186         if (notification_count != 0) {
187                 efi_st_error("Suppressed timer fired\n");
188                 return EFI_ST_FAILURE;
189         }
190         /* Set 1 ms timer */
191         ret = boottime->set_timer(event_wait, EFI_TIMER_RELATIVE, 1000);
192         if (ret != EFI_SUCCESS) {
193                 efi_st_error("Could not set timer\n");
194                 return EFI_ST_FAILURE;
195         }
196         /* Restore the old TPL level */
197         boottime->restore_tpl(TPL_APPLICATION);
198         ret = boottime->wait_for_event(1, &event_wait, &index);
199         if (ret != EFI_SUCCESS) {
200                 efi_st_error("Could not wait for event\n");
201                 return EFI_ST_FAILURE;
202         }
203         efi_st_printf("Notification count with TPL level TPL_APPLICATION: %u\n",
204                       notification_count);
205         if (notification_count < 1) {
206                 efi_st_error("Queued timer event did not fire\n");
207                 return EFI_ST_FAILURE;
208         }
209         ret = boottime->set_timer(event_wait, EFI_TIMER_STOP, 0);
210         if (ret != EFI_SUCCESS) {
211                 efi_st_error("Could not cancel timer\n");
212                 return EFI_ST_FAILURE;
213         }
214
215         return EFI_ST_SUCCESS;
216 }
217
218 EFI_UNIT_TEST(tpl) = {
219         .name = "task priority levels",
220         .phase = EFI_EXECUTE_BEFORE_BOOTTIME_EXIT,
221         .setup = setup,
222         .execute = execute,
223         .teardown = teardown,
224 };