2 ; SwiftLink/Turbo-232 v0.90 device driver, by Craig Bruce, 14-Apr-1998.
4 ; This software is Public Domain. It is in Buddy assembler format.
6 ; This device driver uses the SwiftLink RS-232 Serial Cartridge, available from
7 ; Creative Micro Designs, Inc, and also supports the extensions of the Turbo232
8 ; Serial Cartridge. Both devices are based on the 6551 ACIA chip. It also
9 ; supports the "hacked" SwiftLink with a 1.8432 MHz crystal.
11 ; The code assumes that the kernal + I/O are in context. On the C128, call
12 ; it from Bank 15. On the C64, don't flip out the Kernal unless a suitable
13 ; NMI catcher is put into the RAM under then Kernal. For the SuperCPU, the
14 ; interrupt handling assumes that the 65816 is in 6502-emulation mode.
16 ;--------------------------------------------------------------------------
18 ; Adapted for the use with the cc65 runtime library by
19 ; Ullrich von Bassewitz (uz@musoftware.de) 02-May-1999.
21 ; All external functions are C callable, the return value is an error code.
25 .importzp ptr1, ptr2, tmp1, tmp2
27 .export _rs232_init, _rs232_params, _rs232_done, _rs232_get
28 .export _rs232_put, _rs232_pause, _rs232_unpause, _rs232_status
34 NmiExit = $febc ;exit address for nmi
40 ;----------------------------------------------------------------------------
46 DropCnt: .res 4 ; Number of bytes lost from rx buffer full
47 Initialized: .res 1 ; Flag indicating driver is initialized
48 Stopped: .res 1 ; Flow-stopped flag
50 Errors: .res 1 ; Number of bytes received in error, low byte
51 Turbo232: .res 1 ; Flag indicating turbo-232
52 HackedFlag: .res 1 ; Flag indicating hacked-crystal swiftlink
53 CpuSpeed: .res 1 ; In MHz
54 RecvHead: .res 1 ; Head of receive buffer
55 RecvTail: .res 1 ; Tail of receive buffer
56 RecvFreeCnt: .res 1 ; Number of bytes in receive buffer
57 SendHead: .res 1 ; Head of send buffer
58 SendTail: .res 1 ; Tail of send buffer
59 SendFreeCnt: .res 1 ; Number of bytes free in send buffer
60 BaudCode: .res 1 ; Current baud in effect
62 ; Send and receive buffers: 256 bytes each
67 NmiContinue: .byte $4c ; JMP instruction for NMI save -- continue
68 NmiSave: .res 2 ; normal NMI handler
70 ; Switftlink register offsets
71 RegData = 0 ; Data register
72 RegStatus = 1 ; Status register
73 RegCommand = 2 ; Command register
74 RegControl = 3 ; Control register
75 RegClock = 7 ; Turbo232 external baud-rate generator
81 ;----------------------------------------------------------------------------
83 ; unsigned char __fastcall__ rs232_init (char hacked);
84 ; /* Initialize the serial port, install the interrupt handler. The parameter
85 ; * must be true (non zero) for a hacked swiftlink and false (zero) otherwise.
90 bit Initialized ;** shut down if started
96 ;** set hacked-crystal
100 ;** check for turbo-232
110 ;** get C128/C64 cpu speed
115 ;** check for super-cpu at 20 MHz
124 ;** initialize buffers & control
148 ;** set default to 2400-8N1, enable interrupts
156 @L5: sta ACIA+RegControl
173 ;----------------------------------------------------------------------------
175 ; unsigned char __fastcall__ rs232_params (unsigned char params, unsigned char parity);
176 ; /* Set the port parameters. Use a combination of the #defined values above. */
178 ; Set communication parameters.
180 ; baud rates stops word | parity
181 ; --------------------- ----- ----- | ---------
182 ; $00=50 $08=9600 $00=1 $00=8 | $00=none
183 ; $01=110 $09=19200 $80=2 $20=7 | $20=odd
184 ; $02=134.5 $0a=38400 $40=6 | $60=even
185 ; $03=300 $0b=57600 $60=5 | $A0=mark
186 ; $04=600 $0c=115200 | $E0=space
187 ; $05=1200 $0d=230400
188 ; $06=2400 $0e=future
189 ; $07=4800 $0f=future
195 jmp NotInitialized ; Return an error code
203 ; Check cpu speed against baud rate
217 @L2: lda #RS_ERR_BAUD_TOO_FAST
220 ; Set baud/parameters
231 lda #RS_ERR_BAUD_NOT_AVAIL
239 lda #RS_ERR_BAUD_NOT_AVAIL
276 .byte $ff,$ff,$ff,$05,$06,$07,$08,$0a,$0c,$0e,$0f,$10,$20,$30,$ff,$ff
278 .byte $01,$03,$04,$06,$07,$08,$0a,$0c,$0e,$0f,$ff,$ff,$00,$ff,$ff,$ff
279 ;in: 0 1 2 3 4 5 6 7 8 9 a b c d e f
280 ;baud50 110 134 3 6 12 24 48 96 19 38 57 115 230 exp exp
281 ;out masks: $0F=Baud, val$FF=err
282 ; $30=t232ExtBaud: $00=none, $10=57.6, $20=115.2, $30=230.4
285 ;----------------------------------------------------------------------------
287 ; unsigned char __fastcall__ rs232_done (void);
288 ; /* Close the port, deinstall the interrupt hander. You MUST call this function
289 ; * before terminating the program, otherwise the machine may crash later. If
290 ; * in doubt, install an exit handler using atexit(). The function will do
291 ; * nothing, if it was already called.
297 bit Initialized ;** check initialized
300 ; Stop interrupts, drop DTR
321 ;----------------------------------------------------------------------------
323 ; unsigned char __fastcall__ rs232_get (char* B);
324 ; /* Get a character from the serial port. If no characters are available, the
325 ; * function will return RS_ERR_NO_DATA, so this is not a fatal error.
331 bpl NotInitialized ; Jump if not initialized
333 ; Check for bytes to send
336 stx ptr1+1 ; Store pointer to received char
343 ; Check for buffer empty
352 ; Check for flow stopped & enough free: release flow control
364 ; Get byte from buffer
372 txa ; Return code = 0
375 ;----------------------------------------------------------------------------
377 ; RS232 module not initialized
380 lda #<RS_ERR_NOT_INITIALIZED
381 ldx #>RS_ERR_NOT_INITIALIZED
384 ;----------------------------------------------------------------------------
386 ; unsigned char __fastcall__ rs232_put (char B);
387 ; /* Send a character via the serial port. There is a transmit buffer, but
388 ; * transmitting is not done via interrupt. The function returns
389 ; * RS_ERR_OVERFLOW if there is no space left in the transmit buffer.
395 bpl NotInitialized ; Jump if not initialized
407 ; Put byte into send buffer & send
425 ;----------------------------------------------------------------------------
427 ; unsigned char __fastcall__ rs232_pause (void);
428 ; /* Assert flow control and disable interrupts. */
433 bpl NotInitialized ; Jump if not initialized
435 ; Assert flow control
441 ; Delay for flow stop to be received
458 ; Delay times: 32 byte-receive times in milliseconds, or 100 max.
459 ; Formula = 320,000 / baud
461 .byte 100,100,100,100,100,100,100,067,034,017,009,006,003,002,001,001
462 ;in: 0 1 2 3 4 5 6 7 8 9 a b c d e f
463 ;baud50 110 134 3 6 12 24 48 96 19 38 57 115 230 exp exp
466 ;----------------------------------------------------------------------------
468 ; unsigned char __fastcall__ rs232_unpause (void);
469 ; /* Re-enable interrupts and release flow control */
474 bpl NotInitialized ; Jump if not initialized
476 ; Re-enable rx interrupts & release flow control
484 ; Poll for stalled char & exit
491 ;----------------------------------------------------------------------------
493 ; unsigned char __fastcall__ rs232_status (unsigned char* status,
494 ; unsigned char* errors);
495 ; /* Return the serial port status. */
510 @L1: lda ACIA+RegStatus
513 jsr PollReceive ; bug-recovery hack
520 ;----------------------------------------------------------------------------
523 ; C128 NMI overhead=76 cycles: int=7, maxLatency=6, ROMenter=33, ROMexit=30
524 ; C64 NMI overhead=76 cycles: int=7, maxLatency=6, ROMenter=34, ROMexit=29
526 ; timing: normal=76+43+9=128 cycles, assertFlow=76+52+9=137 cycles
528 ; C128 @ 115.2k: 177 cycles avail (fast)
529 ; C64 @ 57.6k: 177 cycles avail, worstAvail=177-43? = 134
530 ; SCPU @ 230.4k: 868 cycles avail: for a joke!
535 lda ACIA+RegStatus ;(4) ;status ;check for byte received
543 lda ACIA+RegStatus ;(4) opt ;status ;check for receive errors
547 @L1: lda ACIA+RegData ;(4) ;data ;get byte and put into receive buffer
554 cpx #33 ;(2) ;check for buffer space low
558 ; Assert flow control
560 @L2: lda RtsOff ;(3) ;assert flow control if buffer space too low
561 sta ACIA+RegCommand ;(4) ;command
567 @L3: inc DropCnt+0 ; not time-critical
579 ;----------------------------------------------------------------------------
580 ; Try to send a byte. Internal routine. A = TryHard
583 sta tmp1 ; Remember tryHard flag
588 ; Check for flow stopped
593 ;** check that swiftlink is ready to send
595 @L2: lda ACIA+RegStatus
598 bit tmp1 ;keep trying if must try hard
602 ;** send byte and try again
612 ;----------------------------------------------------------------------------
614 ; PollReceive - poll for rx char
615 ; This function is useful in odd cases where the 6551 has a character in
616 ; it but it fails to raise an NMI. It might be edge-triggering conditions?
617 ; Actually, I'm not entirely sure that this condition can still arrise, but
618 ; calling this function does no harm.
636 ;----------------------------------------------------------------------------
638 ; DelayMs : delay for given number of milliseconds
639 ; This implementation isn't very rigerous; it merely delays for the
640 ; approximate number of clock cycles for the processor speed.
642 ; repeat for number of milliseconds:
643 ; repeat for number of MHz of cpu speed:
644 ; delay for 1017 clock cycles
647 DelayMs: ;( .A=milliseconds )
651 bne @L3 ;(3) // 1017 cycles