2 ; Graphics driver for the 240x200x2 monochrome mode on the Atmos
4 ; Jede (jede@oric.org), 2017-10-15
7 .include "zeropage.inc"
9 .include "tgi-kernel.inc"
10 .include "tgi-error.inc"
11 .include "telestrat.inc"
16 XSIZE = 6 ; System font width
17 YSIZE = 8 ; System font height
19 ; ------------------------------------------------------------------------
20 ; Header. Includes jump table and constants.
22 module_header _telestrat_240_200_2_tgi
24 ; First part of the header is a structure that has a magic and defines the
25 ; capabilities of the driver
27 .byte $74, $67, $69 ; "tgi"
28 .byte TGI_API_VERSION ; TGI API version number
29 .addr $0000 ; Library reference
30 .word 240 ; X resolution
31 .word 200 ; Y resolution
32 .byte 2 ; Number of drawing colors
33 .byte 1 ; Number of screens available
34 .byte XSIZE ; System font X size
35 .byte YSIZE ; System font Y size
36 .word $011C ; Aspect ratio (based on 4/3 display)
37 .byte 0 ; TGI driver flags
39 ; Next comes the jump table. Currently all entries must be valid and may point
40 ; to an RTS for test versions (function not implemented).
62 ; ------------------------------------------------------------------------
65 ; Variables mapped to the zero page segment variables. Some of these are
66 ; used for passing parameters to the driver.
73 ; Absolute variables used in the code
77 ERROR: .res 1 ; Error code
78 MODE: .res 1 ; Graphics mode
84 DEFPALETTE: .byte 0, 1
88 ; ------------------------------------------------------------------------
89 ; INSTALL routine. Is called after the driver is loaded into memory. May
90 ; initialize anything that has to be done just once. Is probably empty
93 ; Must set an error code: NO
98 ; ------------------------------------------------------------------------
99 ; UNINSTALL routine. Is called before the driver is removed from memory. May
100 ; clean up anything done by INSTALL but is probably empty most of the time.
102 ; Must set an error code: NO
108 ; ------------------------------------------------------------------------
109 ; INIT: Changes an already installed device from text mode to graphics
111 ; Note that INIT/DONE may be called multiple times while the driver
112 ; is loaded, while INSTALL is only called once, so any code that is needed
113 ; to initializes variables and so on must go here. Setting palette and
114 ; clearing the screen is not needed because this is called by the graphics
116 ; The graphics kernel will never call INIT when a graphics mode is already
117 ; active, so there is no need to protect against that.
119 ; Must set an error code: YES
124 ; Switch into graphics mode
128 ; Done, reset the error code
134 ; ------------------------------------------------------------------------
135 ; DONE: Will be called to switch the graphics device back into text mode.
136 ; The graphics kernel will never call DONE when no graphics mode is active,
137 ; so there is no need to protect against that.
139 ; Must set an error code: NO
146 ; ------------------------------------------------------------------------
147 ; GETERROR: Return the error code in A and clear it.
155 ; ------------------------------------------------------------------------
156 ; CONTROL: Platform/driver specific entry point.
158 ; Must set an error code: YES
165 ; ------------------------------------------------------------------------
166 ; CLEAR: Clears the screen.
168 ; Must set an error code: NO
175 ; ------------------------------------------------------------------------
176 ; SETVIEWPAGE: Set the visible page. Called with the new page in A (0..n).
177 ; The page number is already checked to be valid by the graphics kernel.
179 ; Must set an error code: NO (will only be called if page ok)
184 ; ------------------------------------------------------------------------
185 ; SETDRAWPAGE: Set the drawable page. Called with the new page in A (0..n).
186 ; The page number is already checked to be valid by the graphics kernel.
188 ; Must set an error code: NO (will only be called if page ok)
194 ; ------------------------------------------------------------------------
195 ; SETCOLOR: Set the drawing color (in A). The new color is already checked
196 ; to be in a valid range (0..maxcolor-1).
198 ; Must set an error code: NO (will only be called if color ok)
205 ; ------------------------------------------------------------------------
206 ; SETPALETTE: Set the palette (not available with all drivers/hardware).
207 ; A pointer to the palette is passed in ptr1. Must set an error if palettes
210 ; Must set an error code: YES
214 lda #TGI_ERR_INV_FUNC ; This resolution has no palette
218 ; ------------------------------------------------------------------------
219 ; GETPALETTE: Return the current palette in A/X. Even drivers that cannot
220 ; set the palette should return the default palette here, so there's no
221 ; way for this function to fail.
223 ; Must set an error code: NO
228 ; ------------------------------------------------------------------------
229 ; GETDEFPALETTE: Return the default palette for the driver in A/X. All
230 ; drivers should return something reasonable here, even drivers that don't
231 ; support palettes, otherwise the caller has no way to determine the colors
232 ; of the (not changeable) palette.
234 ; Must set an error code: NO (all drivers must have a default palette)
241 ; ------------------------------------------------------------------------
242 ; SETPIXEL: Draw one pixel at X1/Y1 = ptr1/ptr2 with the current drawing
243 ; color. The coordinates passed to this function are never outside the
244 ; visible screen area, so there is no need for clipping inside this function.
246 ; Must set an error code: NO
265 ; ------------------------------------------------------------------------
266 ; GETPIXEL: Read the color value of a pixel and return it in A/X. The
267 ; coordinates passed to this function are never outside the visible screen
268 ; area, so there is no need for clipping inside this function.
274 ; ------------------------------------------------------------------------
275 ; LINE: Draw a line from X1/Y1 to X2/Y2, where X1/Y1 = ptr1/ptr2 and
276 ; X2/Y2 = ptr3/ptr4 using the current drawing color.
278 ; Must set an error code: NO
304 ; ------------------------------------------------------------------------
305 ; BAR: Draw a filled rectangle with the corners X1/Y1, X2/Y2, where
306 ; X1/Y1 = ptr1/ptr2 and X2/Y2 = ptr3/ptr4 using the current drawing color.
307 ; Contrary to most other functions, the graphics kernel will sort and clip
308 ; the coordinates before calling the driver, so on entry the following
309 ; conditions are valid:
312 ; (X1 >= 0) && (X1 < XRES)
313 ; (X2 >= 0) && (X2 < XRES)
314 ; (Y1 >= 0) && (Y1 < YRES)
315 ; (Y2 >= 0) && (Y2 < YRES)
317 ; Must set an error code: NO
324 ; ------------------------------------------------------------------------
325 ; TEXTSTYLE: Set the style used when calling OUTTEXT. Text scaling in X and Y
326 ; direction is passend in X/Y, the text direction is passed in A.
328 ; Must set an error code: NO
335 ; ------------------------------------------------------------------------
336 ; OUTTEXT: Output text at X/Y = ptr1/ptr2 using the current color and the
337 ; current text style. The text to output is given as a zero terminated
338 ; string with address in ptr3.
340 ; Must set an error code: NO
344 ; put hires cursor in X & Y
349 ; count the length of the string
357 ; XSCHAR routine from telemon needs to have the length of the string in X register
358 ; copy Y register to X register. It could be optimized in 65C02 with TYX
362 lda ptr3 ; XSCHAR needs in A and Y the adress of the string