git.sur5r.net Git - u-boot/blob - net/eth-uclass.c

   1 /*
   2  * (C) Copyright 2001-2015
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  * Joe Hershberger, National Instruments
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #include <common.h>
  10 #include <dm.h>
  11 #include <environment.h>
  12 #include <net.h>
  13 #include <dm/device-internal.h>
  14 #include <dm/uclass-internal.h>
  15 #include "eth_internal.h"
  16
  17 DECLARE_GLOBAL_DATA_PTR;
  18
  19 /**
  20  * struct eth_device_priv - private structure for each Ethernet device
  21  *
  22  * @state: The state of the Ethernet MAC driver (defined by enum eth_state_t)
  23  */
  24 struct eth_device_priv {
  25         enum eth_state_t state;
  26 };
  27
  28 /**
  29  * struct eth_uclass_priv - The structure attached to the uclass itself
  30  *
  31  * @current: The Ethernet device that the network functions are using
  32  */
  33 struct eth_uclass_priv {
  34         struct udevice *current;
  35 };
  36
  37 /* eth_errno - This stores the most recent failure code from DM functions */
  38 static int eth_errno;
  39
  40 static struct eth_uclass_priv *eth_get_uclass_priv(void)
  41 {
  42         struct uclass *uc;
  43
  44         uclass_get(UCLASS_ETH, &uc);
  45         assert(uc);
  46         return uc->priv;
  47 }
  48
  49 void eth_set_current_to_next(void)
  50 {
  51         struct eth_uclass_priv *uc_priv;
  52
  53         uc_priv = eth_get_uclass_priv();
  54         if (uc_priv->current)
  55                 uclass_next_device(&uc_priv->current);
  56         if (!uc_priv->current)
  57                 uclass_first_device(UCLASS_ETH, &uc_priv->current);
  58 }
  59
  60 /*
  61  * Typically this will simply return the active device.
  62  * In the case where the most recent active device was unset, this will attempt
  63  * to return the first device. If that device doesn't exist or fails to probe,
  64  * this function will return NULL.
  65  */
  66 struct udevice *eth_get_dev(void)
  67 {
  68         struct eth_uclass_priv *uc_priv;
  69
  70         uc_priv = eth_get_uclass_priv();
  71         if (!uc_priv->current)
  72                 eth_errno = uclass_first_device(UCLASS_ETH,
  73                                     &uc_priv->current);
  74         return uc_priv->current;
  75 }
  76
  77 /*
  78  * Typically this will just store a device pointer.
  79  * In case it was not probed, we will attempt to do so.
  80  * dev may be NULL to unset the active device.
  81  */
  82 void eth_set_dev(struct udevice *dev)
  83 {
  84         if (dev && !device_active(dev)) {
  85                 eth_errno = device_probe(dev);
  86                 if (eth_errno)
  87                         dev = NULL;
  88         }
  89
  90         eth_get_uclass_priv()->current = dev;
  91 }
  92
  93 /*
  94  * Find the udevice that either has the name passed in as devname or has an
  95  * alias named devname.
  96  */
  97 struct udevice *eth_get_dev_by_name(const char *devname)
  98 {
  99         int seq = -1;
 100         char *endp = NULL;
 101         const char *startp = NULL;
 102         struct udevice *it;
 103         struct uclass *uc;
 104         int len = strlen("eth");
 105
 106         /* Must be longer than 3 to be an alias */
 107         if (!strncmp(devname, "eth", len) && strlen(devname) > len) {
 108                 startp = devname + len;
 109                 seq = simple_strtoul(startp, &endp, 10);
 110         }
 111
 112         uclass_get(UCLASS_ETH, &uc);
 113         uclass_foreach_dev(it, uc) {
 114                 /*
 115                  * We need the seq to be valid, so try to probe it.
 116                  * If the probe fails, the seq will not match since it will be
 117                  * -1 instead of what we are looking for.
 118                  * We don't care about errors from probe here. Either they won't
 119                  * match an alias or it will match a literal name and we'll pick
 120                  * up the error when we try to probe again in eth_set_dev().
 121                  */
 122                 if (device_probe(it))
 123                         continue;
 124                 /* Check for the name or the sequence number to match */
 125                 if (strcmp(it->name, devname) == 0 ||
 126                     (endp > startp && it->seq == seq))
 127                         return it;
 128         }
 129
 130         return NULL;
 131 }
 132
 133 unsigned char *eth_get_ethaddr(void)
 134 {
 135         struct eth_pdata *pdata;
 136
 137         if (eth_get_dev()) {
 138                 pdata = eth_get_dev()->platdata;
 139                 return pdata->enetaddr;
 140         }
 141
 142         return NULL;
 143 }
 144
 145 /* Set active state without calling start on the driver */
 146 int eth_init_state_only(void)
 147 {
 148         struct udevice *current;
 149         struct eth_device_priv *priv;
 150
 151         current = eth_get_dev();
 152         if (!current || !device_active(current))
 153                 return -EINVAL;
 154
 155         priv = current->uclass_priv;
 156         priv->state = ETH_STATE_ACTIVE;
 157
 158         return 0;
 159 }
 160
 161 /* Set passive state without calling stop on the driver */
 162 void eth_halt_state_only(void)
 163 {
 164         struct udevice *current;
 165         struct eth_device_priv *priv;
 166
 167         current = eth_get_dev();
 168         if (!current || !device_active(current))
 169                 return;
 170
 171         priv = current->uclass_priv;
 172         priv->state = ETH_STATE_PASSIVE;
 173 }
 174
 175 int eth_get_dev_index(void)
 176 {
 177         if (eth_get_dev())
 178                 return eth_get_dev()->seq;
 179         return -1;
 180 }
 181
 182 static int eth_write_hwaddr(struct udevice *dev)
 183 {
 184         struct eth_pdata *pdata = dev->platdata;
 185         int ret = 0;
 186
 187         if (!dev || !device_active(dev))
 188                 return -EINVAL;
 189
 190         /* seq is valid since the device is active */
 191         if (eth_get_ops(dev)->write_hwaddr && !eth_mac_skip(dev->seq)) {
 192                 if (!is_valid_ethaddr(pdata->enetaddr)) {
 193                         printf("\nError: %s address %pM illegal value\n",
 194                                dev->name, pdata->enetaddr);
 195                         return -EINVAL;
 196                 }
 197
 198                 /*
 199                  * Drivers are allowed to decide not to implement this at
 200                  * run-time. E.g. Some devices may use it and some may not.
 201                  */
 202                 ret = eth_get_ops(dev)->write_hwaddr(dev);
 203                 if (ret == -ENOSYS)
 204                         ret = 0;
 205                 if (ret)
 206                         printf("\nWarning: %s failed to set MAC address\n",
 207                                dev->name);
 208         }
 209
 210         return ret;
 211 }
 212
 213 static int on_ethaddr(const char *name, const char *value, enum env_op op,
 214         int flags)
 215 {
 216         int index;
 217         int retval;
 218         struct udevice *dev;
 219
 220         /* look for an index after "eth" */
 221         index = simple_strtoul(name + 3, NULL, 10);
 222
 223         retval = uclass_find_device_by_seq(UCLASS_ETH, index, false, &dev);
 224         if (!retval) {
 225                 struct eth_pdata *pdata = dev->platdata;
 226                 switch (op) {
 227                 case env_op_create:
 228                 case env_op_overwrite:
 229                         eth_parse_enetaddr(value, pdata->enetaddr);
 230                         eth_write_hwaddr(dev);
 231                         break;
 232                 case env_op_delete:
 233                         memset(pdata->enetaddr, 0, 6);
 234                 }
 235         }
 236
 237         return 0;
 238 }
 239 U_BOOT_ENV_CALLBACK(ethaddr, on_ethaddr);
 240
 241 int eth_init(void)
 242 {
 243         char *ethact = getenv("ethact");
 244         char *ethrotate = getenv("ethrotate");
 245         struct udevice *current = NULL;
 246         struct udevice *old_current;
 247         int ret = -ENODEV;
 248
 249         /*
 250          * When 'ethrotate' variable is set to 'no' and 'ethact' variable
 251          * is already set to an ethernet device, we should stick to 'ethact'.
 252          */
 253         if ((ethrotate != NULL) && (strcmp(ethrotate, "no") == 0)) {
 254                 if (ethact) {
 255                         current = eth_get_dev_by_name(ethact);
 256                         if (!current)
 257                                 return -EINVAL;
 258                 }
 259         }
 260
 261         if (!current) {
 262                 current = eth_get_dev();
 263                 if (!current) {
 264                         printf("No ethernet found.\n");
 265                         return -ENODEV;
 266                 }
 267         }
 268
 269         old_current = current;
 270         do {
 271                 if (current) {
 272                         debug("Trying %s\n", current->name);
 273
 274                         if (device_active(current)) {
 275                                 ret = eth_get_ops(current)->start(current);
 276                                 if (ret >= 0) {
 277                                         struct eth_device_priv *priv =
 278                                                 current->uclass_priv;
 279
 280                                         priv->state = ETH_STATE_ACTIVE;
 281                                         return 0;
 282                                 }
 283                         } else {
 284                                 ret = eth_errno;
 285                         }
 286
 287                         debug("FAIL\n");
 288                 } else {
 289                         debug("PROBE FAIL\n");
 290                 }
 291
 292                 /*
 293                  * If ethrotate is enabled, this will change "current",
 294                  * otherwise we will drop out of this while loop immediately
 295                  */
 296                 eth_try_another(0);
 297                 /* This will ensure the new "current" attempted to probe */
 298                 current = eth_get_dev();
 299         } while (old_current != current);
 300
 301         return ret;
 302 }
 303
 304 void eth_halt(void)
 305 {
 306         struct udevice *current;
 307         struct eth_device_priv *priv;
 308
 309         current = eth_get_dev();
 310         if (!current || !device_active(current))
 311                 return;
 312
 313         eth_get_ops(current)->stop(current);
 314         priv = current->uclass_priv;
 315         priv->state = ETH_STATE_PASSIVE;
 316 }
 317
 318 int eth_is_active(struct udevice *dev)
 319 {
 320         struct eth_device_priv *priv;
 321
 322         if (!dev || !device_active(dev))
 323                 return 0;
 324
 325         priv = dev_get_uclass_priv(dev);
 326         return priv->state == ETH_STATE_ACTIVE;
 327 }
 328
 329 int eth_send(void *packet, int length)
 330 {
 331         struct udevice *current;
 332         int ret;
 333
 334         current = eth_get_dev();
 335         if (!current)
 336                 return -ENODEV;
 337
 338         if (!device_active(current))
 339                 return -EINVAL;
 340
 341         ret = eth_get_ops(current)->send(current, packet, length);
 342         if (ret < 0) {
 343                 /* We cannot completely return the error at present */
 344                 debug("%s: send() returned error %d\n", __func__, ret);
 345         }
 346         return ret;
 347 }
 348
 349 int eth_rx(void)
 350 {
 351         struct udevice *current;
 352         uchar *packet;
 353         int flags;
 354         int ret;
 355         int i;
 356
 357         current = eth_get_dev();
 358         if (!current)
 359                 return -ENODEV;
 360
 361         if (!device_active(current))
 362                 return -EINVAL;
 363
 364         /* Process up to 32 packets at one time */
 365         flags = ETH_RECV_CHECK_DEVICE;
 366         for (i = 0; i < 32; i++) {
 367                 ret = eth_get_ops(current)->recv(current, flags, &packet);
 368                 flags = 0;
 369                 if (ret > 0)
 370                         net_process_received_packet(packet, ret);
 371                 if (ret >= 0 && eth_get_ops(current)->free_pkt)
 372                         eth_get_ops(current)->free_pkt(current, packet, ret);
 373                 if (ret <= 0)
 374                         break;
 375         }
 376         if (ret == -EAGAIN)
 377                 ret = 0;
 378         if (ret < 0) {
 379                 /* We cannot completely return the error at present */
 380                 debug("%s: recv() returned error %d\n", __func__, ret);
 381         }
 382         return ret;
 383 }
 384
 385 int eth_initialize(void)
 386 {
 387         int num_devices = 0;
 388         struct udevice *dev;
 389
 390         eth_common_init();
 391
 392         /*
 393          * Devices need to write the hwaddr even if not started so that Linux
 394          * will have access to the hwaddr that u-boot stored for the device.
 395          * This is accomplished by attempting to probe each device and calling
 396          * their write_hwaddr() operation.
 397          */
 398         uclass_first_device(UCLASS_ETH, &dev);
 399         if (!dev) {
 400                 printf("No ethernet found.\n");
 401                 bootstage_error(BOOTSTAGE_ID_NET_ETH_START);
 402         } else {
 403                 char *ethprime = getenv("ethprime");
 404                 struct udevice *prime_dev = NULL;
 405
 406                 if (ethprime)
 407                         prime_dev = eth_get_dev_by_name(ethprime);
 408                 if (prime_dev) {
 409                         eth_set_dev(prime_dev);
 410                         eth_current_changed();
 411                 } else {
 412                         eth_set_dev(NULL);
 413                 }
 414
 415                 bootstage_mark(BOOTSTAGE_ID_NET_ETH_INIT);
 416                 do {
 417                         if (num_devices)
 418                                 printf(", ");
 419
 420                         printf("eth%d: %s", dev->seq, dev->name);
 421
 422                         if (ethprime && dev == prime_dev)
 423                                 printf(" [PRIME]");
 424
 425                         eth_write_hwaddr(dev);
 426
 427                         uclass_next_device(&dev);
 428                         num_devices++;
 429                 } while (dev);
 430
 431                 putc('\n');
 432         }
 433
 434         return num_devices;
 435 }
 436
 437 static int eth_post_bind(struct udevice *dev)
 438 {
 439         if (strchr(dev->name, ' ')) {
 440                 printf("\nError: eth device name \"%s\" has a space!\n",
 441                        dev->name);
 442                 return -EINVAL;
 443         }
 444
 445         return 0;
 446 }
 447
 448 static int eth_pre_unbind(struct udevice *dev)
 449 {
 450         /* Don't hang onto a pointer that is going away */
 451         if (dev == eth_get_uclass_priv()->current)
 452                 eth_set_dev(NULL);
 453
 454         return 0;
 455 }
 456
 457 static int eth_post_probe(struct udevice *dev)
 458 {
 459         struct eth_device_priv *priv = dev->uclass_priv;
 460         struct eth_pdata *pdata = dev->platdata;
 461         unsigned char env_enetaddr[6];
 462
 463 #if defined(CONFIG_NEEDS_MANUAL_RELOC)
 464         struct eth_ops *ops = eth_get_ops(dev);
 465         static int reloc_done;
 466
 467         if (!reloc_done) {
 468                 if (ops->start)
 469                         ops->start += gd->reloc_off;
 470                 if (ops->send)
 471                         ops->send += gd->reloc_off;
 472                 if (ops->recv)
 473                         ops->recv += gd->reloc_off;
 474                 if (ops->free_pkt)
 475                         ops->free_pkt += gd->reloc_off;
 476                 if (ops->stop)
 477                         ops->stop += gd->reloc_off;
 478 #ifdef CONFIG_MCAST_TFTP
 479                 if (ops->mcast)
 480                         ops->mcast += gd->reloc_off;
 481 #endif
 482                 if (ops->write_hwaddr)
 483                         ops->write_hwaddr += gd->reloc_off;
 484                 if (ops->read_rom_hwaddr)
 485                         ops->read_rom_hwaddr += gd->reloc_off;
 486
 487                 reloc_done++;
 488         }
 489 #endif
 490
 491         priv->state = ETH_STATE_INIT;
 492
 493         /* Check if the device has a MAC address in ROM */
 494         if (eth_get_ops(dev)->read_rom_hwaddr)
 495                 eth_get_ops(dev)->read_rom_hwaddr(dev);
 496
 497         eth_getenv_enetaddr_by_index("eth", dev->seq, env_enetaddr);
 498         if (!is_zero_ethaddr(env_enetaddr)) {
 499                 if (!is_zero_ethaddr(pdata->enetaddr) &&
 500                     memcmp(pdata->enetaddr, env_enetaddr, 6)) {
 501                         printf("\nWarning: %s MAC addresses don't match:\n",
 502                                dev->name);
 503                         printf("Address in SROM is         %pM\n",
 504                                pdata->enetaddr);
 505                         printf("Address in environment is  %pM\n",
 506                                env_enetaddr);
 507                 }
 508
 509                 /* Override the ROM MAC address */
 510                 memcpy(pdata->enetaddr, env_enetaddr, 6);
 511         } else if (is_valid_ethaddr(pdata->enetaddr)) {
 512                 eth_setenv_enetaddr_by_index("eth", dev->seq, pdata->enetaddr);
 513                 printf("\nWarning: %s using MAC address from ROM\n",
 514                        dev->name);
 515         } else if (is_zero_ethaddr(pdata->enetaddr) ||
 516                    !is_valid_ethaddr(pdata->enetaddr)) {
 517 #ifdef CONFIG_NET_RANDOM_ETHADDR
 518                 net_random_ethaddr(pdata->enetaddr);
 519                 printf("\nWarning: %s (eth%d) using random MAC address - %pM\n",
 520                        dev->name, dev->seq, pdata->enetaddr);
 521 #else
 522                 printf("\nError: %s address not set.\n",
 523                        dev->name);
 524                 return -EINVAL;
 525 #endif
 526         }
 527
 528         return 0;
 529 }
 530
 531 static int eth_pre_remove(struct udevice *dev)
 532 {
 533         struct eth_pdata *pdata = dev->platdata;
 534
 535         eth_get_ops(dev)->stop(dev);
 536
 537         /* clear the MAC address */
 538         memset(pdata->enetaddr, 0, 6);
 539
 540         return 0;
 541 }
 542
 543 UCLASS_DRIVER(eth) = {
 544         .name           = "eth",
 545         .id             = UCLASS_ETH,
 546         .post_bind      = eth_post_bind,
 547         .pre_unbind     = eth_pre_unbind,
 548         .post_probe     = eth_post_probe,
 549         .pre_remove     = eth_pre_remove,
 550         .priv_auto_alloc_size = sizeof(struct eth_uclass_priv),
 551         .per_device_auto_alloc_size = sizeof(struct eth_device_priv),
 552         .flags          = DM_UC_FLAG_SEQ_ALIAS,
 553 };