git.sur5r.net Git - openocd/blob - src/flash/nor/str9x.c

   1 /***************************************************************************
   2  *   Copyright (C) 2005 by Dominic Rath                                    *
   3  *   Dominic.Rath@gmx.de                                                   *
   4  *                                                                         *
   5  *   Copyright (C) 2008 by Spencer Oliver                                  *
   6  *   spen@spen-soft.co.uk                                                  *
   7  *
   8  *   Copyright (C) 2008 by Oyvind Harboe                                   *
   9  *   oyvind.harboe@zylin.com                                               *
  10  *                                                                         *
  11  *   This program is free software; you can redistribute it and/or modify  *
  12  *   it under the terms of the GNU General Public License as published by  *
  13  *   the Free Software Foundation; either version 2 of the License, or     *
  14  *   (at your option) any later version.                                   *
  15  *                                                                         *
  16  *   This program is distributed in the hope that it will be useful,       *
  17  *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
  18  *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
  19  *   GNU General Public License for more details.                          *
  20  *                                                                         *
  21  *   You should have received a copy of the GNU General Public License     *
  22  *   along with this program; if not, write to the                         *
  23  *   Free Software Foundation, Inc.,                                       *
  24  *   51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.           *
  25  ***************************************************************************/
  26
  27 #ifdef HAVE_CONFIG_H
  28 #include "config.h"
  29 #endif
  30
  31 #include "imp.h"
  32 #include <target/arm966e.h>
  33 #include <target/algorithm.h>
  34
  35 /* Flash registers */
  36
  37 #define FLASH_BBSR              0x54000000              /* Boot Bank Size Register                */
  38 #define FLASH_NBBSR             0x54000004              /* Non-Boot Bank Size Register            */
  39 #define FLASH_BBADR             0x5400000C              /* Boot Bank Base Address Register        */
  40 #define FLASH_NBBADR    0x54000010              /* Non-Boot Bank Base Address Register    */
  41 #define FLASH_CR                0x54000018              /* Control Register                       */
  42 #define FLASH_SR                0x5400001C              /* Status Register                        */
  43 #define FLASH_BCE5ADDR  0x54000020              /* BC Fifth Entry Target Address Register */
  44
  45 struct str9x_flash_bank {
  46         uint32_t *sector_bits;
  47         int variant;
  48         int bank1;
  49 };
  50
  51 enum str9x_status_codes {
  52         STR9X_CMD_SUCCESS = 0,
  53         STR9X_INVALID_COMMAND = 1,
  54         STR9X_SRC_ADDR_ERROR = 2,
  55         STR9X_DST_ADDR_ERROR = 3,
  56         STR9X_SRC_ADDR_NOT_MAPPED = 4,
  57         STR9X_DST_ADDR_NOT_MAPPED = 5,
  58         STR9X_COUNT_ERROR = 6,
  59         STR9X_INVALID_SECTOR = 7,
  60         STR9X_SECTOR_NOT_BLANK = 8,
  61         STR9X_SECTOR_NOT_PREPARED = 9,
  62         STR9X_COMPARE_ERROR = 10,
  63         STR9X_BUSY = 11
  64 };
  65
  66 static uint32_t bank1start = 0x00080000;
  67
  68 static int str9x_build_block_list(struct flash_bank *bank)
  69 {
  70         struct str9x_flash_bank *str9x_info = bank->driver_priv;
  71
  72         int i;
  73         int num_sectors;
  74         int b0_sectors = 0, b1_sectors = 0;
  75         uint32_t offset = 0;
  76
  77         /* set if we have large flash str9 */
  78         str9x_info->variant = 0;
  79         str9x_info->bank1 = 0;
  80
  81         switch (bank->size) {
  82                 case (256 * 1024):
  83                         b0_sectors = 4;
  84                         break;
  85                 case (512 * 1024):
  86                         b0_sectors = 8;
  87                         break;
  88                 case (1024 * 1024):
  89                         bank1start = 0x00100000;
  90                         str9x_info->variant = 1;
  91                         b0_sectors = 16;
  92                         break;
  93                 case (2048 * 1024):
  94                         bank1start = 0x00200000;
  95                         str9x_info->variant = 1;
  96                         b0_sectors = 32;
  97                         break;
  98                 case (128 * 1024):
  99                         str9x_info->variant = 1;
 100                         str9x_info->bank1 = 1;
 101                         b1_sectors = 8;
 102                         bank1start = bank->base;
 103                         break;
 104                 case (32 * 1024):
 105                         str9x_info->bank1 = 1;
 106                         b1_sectors = 4;
 107                         bank1start = bank->base;
 108                         break;
 109                 default:
 110                         LOG_ERROR("BUG: unknown bank->size encountered");
 111                         exit(-1);
 112         }
 113
 114         num_sectors = b0_sectors + b1_sectors;
 115
 116         bank->num_sectors = num_sectors;
 117         bank->sectors = malloc(sizeof(struct flash_sector) * num_sectors);
 118         str9x_info->sector_bits = malloc(sizeof(uint32_t) * num_sectors);
 119
 120         num_sectors = 0;
 121
 122         for (i = 0; i < b0_sectors; i++) {
 123                 bank->sectors[num_sectors].offset = offset;
 124                 bank->sectors[num_sectors].size = 0x10000;
 125                 offset += bank->sectors[i].size;
 126                 bank->sectors[num_sectors].is_erased = -1;
 127                 bank->sectors[num_sectors].is_protected = 1;
 128                 str9x_info->sector_bits[num_sectors++] = (1 << i);
 129         }
 130
 131         for (i = 0; i < b1_sectors; i++) {
 132                 bank->sectors[num_sectors].offset = offset;
 133                 bank->sectors[num_sectors].size = str9x_info->variant == 0 ? 0x2000 : 0x4000;
 134                 offset += bank->sectors[i].size;
 135                 bank->sectors[num_sectors].is_erased = -1;
 136                 bank->sectors[num_sectors].is_protected = 1;
 137                 if (str9x_info->variant)
 138                         str9x_info->sector_bits[num_sectors++] = (1 << i);
 139                 else
 140                         str9x_info->sector_bits[num_sectors++] = (1 << (i + 8));
 141         }
 142
 143         return ERROR_OK;
 144 }
 145
 146 /* flash bank str9x <base> <size> 0 0 <target#>
 147  */
 148 FLASH_BANK_COMMAND_HANDLER(str9x_flash_bank_command)
 149 {
 150         struct str9x_flash_bank *str9x_info;
 151
 152         if (CMD_ARGC < 6)
 153                 return ERROR_COMMAND_SYNTAX_ERROR;
 154
 155         str9x_info = malloc(sizeof(struct str9x_flash_bank));
 156         bank->driver_priv = str9x_info;
 157
 158         str9x_build_block_list(bank);
 159
 160         return ERROR_OK;
 161 }
 162
 163 static int str9x_protect_check(struct flash_bank *bank)
 164 {
 165         int retval;
 166         struct str9x_flash_bank *str9x_info = bank->driver_priv;
 167         struct target *target = bank->target;
 168
 169         int i;
 170         uint32_t adr;
 171         uint32_t status = 0;
 172         uint16_t hstatus = 0;
 173
 174         if (bank->target->state != TARGET_HALTED) {
 175                 LOG_ERROR("Target not halted");
 176                 return ERROR_TARGET_NOT_HALTED;
 177         }
 178
 179         /* read level one protection */
 180
 181         if (str9x_info->variant) {
 182                 if (str9x_info->bank1) {
 183                         adr = bank1start + 0x18;
 184                         retval = target_write_u16(target, adr, 0x90);
 185                         if (retval != ERROR_OK)
 186                                 return retval;
 187                         retval = target_read_u16(target, adr, &hstatus);
 188                         if (retval != ERROR_OK)
 189                                 return retval;
 190                         status = hstatus;
 191                 } else {
 192                         adr = bank1start + 0x14;
 193                         retval = target_write_u16(target, adr, 0x90);
 194                         if (retval != ERROR_OK)
 195                                 return retval;
 196                         retval = target_read_u32(target, adr, &status);
 197                         if (retval != ERROR_OK)
 198                                 return retval;
 199                 }
 200         } else {
 201                 adr = bank1start + 0x10;
 202                 retval = target_write_u16(target, adr, 0x90);
 203                 if (retval != ERROR_OK)
 204                         return retval;
 205                 retval = target_read_u16(target, adr, &hstatus);
 206                 if (retval != ERROR_OK)
 207                         return retval;
 208                 status = hstatus;
 209         }
 210
 211         /* read array command */
 212         retval = target_write_u16(target, adr, 0xFF);
 213         if (retval != ERROR_OK)
 214                 return retval;
 215
 216         for (i = 0; i < bank->num_sectors; i++) {
 217                 if (status & str9x_info->sector_bits[i])
 218                         bank->sectors[i].is_protected = 1;
 219                 else
 220                         bank->sectors[i].is_protected = 0;
 221         }
 222
 223         return ERROR_OK;
 224 }
 225
 226 static int str9x_erase(struct flash_bank *bank, int first, int last)
 227 {
 228         struct target *target = bank->target;
 229         int i;
 230         uint32_t adr;
 231         uint8_t status;
 232         uint8_t erase_cmd;
 233         int total_timeout;
 234
 235         if (bank->target->state != TARGET_HALTED) {
 236                 LOG_ERROR("Target not halted");
 237                 return ERROR_TARGET_NOT_HALTED;
 238         }
 239
 240         /* Check if we can erase whole bank */
 241         if ((first == 0) && (last == (bank->num_sectors - 1))) {
 242                 /* Optimize to run erase bank command instead of sector */
 243                 erase_cmd = 0x80;
 244                 /* Add timeout duration since erase bank takes more time */
 245                 total_timeout = 1000 * bank->num_sectors;
 246         } else {
 247                 /* Erase sector command */
 248                 erase_cmd = 0x20;
 249                 total_timeout = 1000;
 250         }
 251
 252         /* this is so the compiler can *know* */
 253         assert(total_timeout > 0);
 254
 255         for (i = first; i <= last; i++) {
 256                 int retval;
 257                 adr = bank->base + bank->sectors[i].offset;
 258
 259                 /* erase sectors or block */
 260                 retval = target_write_u16(target, adr, erase_cmd);
 261                 if (retval != ERROR_OK)
 262                         return retval;
 263                 retval = target_write_u16(target, adr, 0xD0);
 264                 if (retval != ERROR_OK)
 265                         return retval;
 266
 267                 /* get status */
 268                 retval = target_write_u16(target, adr, 0x70);
 269                 if (retval != ERROR_OK)
 270                         return retval;
 271
 272                 int timeout;
 273                 for (timeout = 0; timeout < total_timeout; timeout++) {
 274                         retval = target_read_u8(target, adr, &status);
 275                         if (retval != ERROR_OK)
 276                                 return retval;
 277                         if (status & 0x80)
 278                                 break;
 279                         alive_sleep(1);
 280                 }
 281                 if (timeout == total_timeout) {
 282                         LOG_ERROR("erase timed out");
 283                         return ERROR_FAIL;
 284                 }
 285
 286                 /* clear status, also clear read array */
 287                 retval = target_write_u16(target, adr, 0x50);
 288                 if (retval != ERROR_OK)
 289                         return retval;
 290
 291                 /* read array command */
 292                 retval = target_write_u16(target, adr, 0xFF);
 293                 if (retval != ERROR_OK)
 294                         return retval;
 295
 296                 if (status & 0x22) {
 297                         LOG_ERROR("error erasing flash bank, status: 0x%x", status);
 298                         return ERROR_FLASH_OPERATION_FAILED;
 299                 }
 300
 301                 /* If we ran erase bank command, we are finished */
 302                 if (erase_cmd == 0x80)
 303                         break;
 304         }
 305
 306         for (i = first; i <= last; i++)
 307                 bank->sectors[i].is_erased = 1;
 308
 309         return ERROR_OK;
 310 }
 311
 312 static int str9x_protect(struct flash_bank *bank,
 313                 int set, int first, int last)
 314 {
 315         struct target *target = bank->target;
 316         int i;
 317         uint32_t adr;
 318         uint8_t status;
 319
 320         if (bank->target->state != TARGET_HALTED) {
 321                 LOG_ERROR("Target not halted");
 322                 return ERROR_TARGET_NOT_HALTED;
 323         }
 324
 325         for (i = first; i <= last; i++) {
 326                 /* Level One Protection */
 327
 328                 adr = bank->base + bank->sectors[i].offset;
 329
 330                 target_write_u16(target, adr, 0x60);
 331                 if (set)
 332                         target_write_u16(target, adr, 0x01);
 333                 else
 334                         target_write_u16(target, adr, 0xD0);
 335
 336                 /* query status */
 337                 target_read_u8(target, adr, &status);
 338
 339                 /* clear status, also clear read array */
 340                 target_write_u16(target, adr, 0x50);
 341
 342                 /* read array command */
 343                 target_write_u16(target, adr, 0xFF);
 344         }
 345
 346         return ERROR_OK;
 347 }
 348
 349 static int str9x_write_block(struct flash_bank *bank,
 350                 uint8_t *buffer, uint32_t offset, uint32_t count)
 351 {
 352         struct target *target = bank->target;
 353         uint32_t buffer_size = 32768;
 354         struct working_area *write_algorithm;
 355         struct working_area *source;
 356         uint32_t address = bank->base + offset;
 357         struct reg_param reg_params[4];
 358         struct arm_algorithm arm_algo;
 359         int retval = ERROR_OK;
 360
 361         /* see contib/loaders/flash/str9x.s for src */
 362
 363         static const uint32_t str9x_flash_write_code[] = {
 364                                         /* write:                               */
 365                 0xe3c14003,     /*      bic     r4, r1, #3              */
 366                 0xe3a03040,     /*      mov     r3, #0x40               */
 367                 0xe1c430b0,     /*      strh r3, [r4, #0]       */
 368                 0xe0d030b2,     /*      ldrh r3, [r0], #2       */
 369                 0xe0c130b2,     /*      strh r3, [r1], #2       */
 370                 0xe3a03070,     /*      mov r3, #0x70           */
 371                 0xe1c430b0,     /*      strh r3, [r4, #0]       */
 372                                         /* busy:                                */
 373                 0xe5d43000,     /*      ldrb r3, [r4, #0]       */
 374                 0xe3130080,     /*      tst r3, #0x80           */
 375                 0x0afffffc,     /*      beq busy                        */
 376                 0xe3a05050,     /*      mov     r5, #0x50               */
 377                 0xe1c450b0,     /*      strh r5, [r4, #0]       */
 378                 0xe3a050ff,     /*      mov     r5, #0xFF               */
 379                 0xe1c450b0,     /*      strh r5, [r4, #0]       */
 380                 0xe3130012,     /*      tst     r3, #0x12               */
 381                 0x1a000001,     /*      bne exit                        */
 382                 0xe2522001,     /*      subs r2, r2, #1         */
 383                 0x1affffed,     /*      bne write                       */
 384                                         /* exit:                                */
 385                 0xe1200070,     /*      bkpt #0                         */
 386         };
 387
 388         /* flash write code */
 389         if (target_alloc_working_area(target, sizeof(str9x_flash_write_code),
 390                         &write_algorithm) != ERROR_OK) {
 391                 LOG_WARNING("no working area available, can't do block memory writes");
 392                 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
 393         };
 394
 395         uint8_t code[sizeof(str9x_flash_write_code)];
 396         target_buffer_set_u32_array(target, code, ARRAY_SIZE(str9x_flash_write_code),
 397                         str9x_flash_write_code);
 398         target_write_buffer(target, write_algorithm->address, sizeof(code), code);
 399
 400         /* memory buffer */
 401         while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) {
 402                 buffer_size /= 2;
 403                 if (buffer_size <= 256) {
 404                         /* we already allocated the writing code, but failed to get a
 405                          * buffer, free the algorithm */
 406                         target_free_working_area(target, write_algorithm);
 407
 408                         LOG_WARNING("no large enough working area available, can't do block memory writes");
 409                         return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
 410                 }
 411         }
 412
 413         arm_algo.common_magic = ARM_COMMON_MAGIC;
 414         arm_algo.core_mode = ARM_MODE_SVC;
 415         arm_algo.core_state = ARM_STATE_ARM;
 416
 417         init_reg_param(&reg_params[0], "r0", 32, PARAM_OUT);
 418         init_reg_param(&reg_params[1], "r1", 32, PARAM_OUT);
 419         init_reg_param(&reg_params[2], "r2", 32, PARAM_OUT);
 420         init_reg_param(&reg_params[3], "r3", 32, PARAM_IN);
 421
 422         while (count > 0) {
 423                 uint32_t thisrun_count = (count > (buffer_size / 2)) ? (buffer_size / 2) : count;
 424
 425                 target_write_buffer(target, source->address, thisrun_count * 2, buffer);
 426
 427                 buf_set_u32(reg_params[0].value, 0, 32, source->address);
 428                 buf_set_u32(reg_params[1].value, 0, 32, address);
 429                 buf_set_u32(reg_params[2].value, 0, 32, thisrun_count);
 430
 431                 retval = target_run_algorithm(target, 0, NULL, 4, reg_params,
 432                                 write_algorithm->address,
 433                                 0, 10000, &arm_algo);
 434                 if (retval != ERROR_OK) {
 435                         LOG_ERROR("error executing str9x flash write algorithm");
 436                         retval = ERROR_FLASH_OPERATION_FAILED;
 437                         break;
 438                 }
 439
 440                 if (buf_get_u32(reg_params[3].value, 0, 32) != 0x80) {
 441                         retval = ERROR_FLASH_OPERATION_FAILED;
 442                         break;
 443                 }
 444
 445                 buffer += thisrun_count * 2;
 446                 address += thisrun_count * 2;
 447                 count -= thisrun_count;
 448         }
 449
 450         target_free_working_area(target, source);
 451         target_free_working_area(target, write_algorithm);
 452
 453         destroy_reg_param(&reg_params[0]);
 454         destroy_reg_param(&reg_params[1]);
 455         destroy_reg_param(&reg_params[2]);
 456         destroy_reg_param(&reg_params[3]);
 457
 458         return retval;
 459 }
 460
 461 static int str9x_write(struct flash_bank *bank,
 462                 uint8_t *buffer, uint32_t offset, uint32_t count)
 463 {
 464         struct target *target = bank->target;
 465         uint32_t words_remaining = (count / 2);
 466         uint32_t bytes_remaining = (count & 0x00000001);
 467         uint32_t address = bank->base + offset;
 468         uint32_t bytes_written = 0;
 469         uint8_t status;
 470         int retval;
 471         uint32_t check_address = offset;
 472         uint32_t bank_adr;
 473         int i;
 474
 475         if (bank->target->state != TARGET_HALTED) {
 476                 LOG_ERROR("Target not halted");
 477                 return ERROR_TARGET_NOT_HALTED;
 478         }
 479
 480         if (offset & 0x1) {
 481                 LOG_WARNING("offset 0x%" PRIx32 " breaks required 2-byte alignment", offset);
 482                 return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
 483         }
 484
 485         for (i = 0; i < bank->num_sectors; i++) {
 486                 uint32_t sec_start = bank->sectors[i].offset;
 487                 uint32_t sec_end = sec_start + bank->sectors[i].size;
 488
 489                 /* check if destination falls within the current sector */
 490                 if ((check_address >= sec_start) && (check_address < sec_end)) {
 491                         /* check if destination ends in the current sector */
 492                         if (offset + count < sec_end)
 493                                 check_address = offset + count;
 494                         else
 495                                 check_address = sec_end;
 496                 }
 497         }
 498
 499         if (check_address != offset + count)
 500                 return ERROR_FLASH_DST_OUT_OF_BANK;
 501
 502         /* multiple half words (2-byte) to be programmed? */
 503         if (words_remaining > 0) {
 504                 /* try using a block write */
 505                 retval = str9x_write_block(bank, buffer, offset, words_remaining);
 506                 if (retval != ERROR_OK) {
 507                         if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) {
 508                                 /* if block write failed (no sufficient working area),
 509                                  * we use normal (slow) single dword accesses */
 510                                 LOG_WARNING("couldn't use block writes, falling back to single memory accesses");
 511                         } else if (retval == ERROR_FLASH_OPERATION_FAILED) {
 512                                 LOG_ERROR("flash writing failed");
 513                                 return ERROR_FLASH_OPERATION_FAILED;
 514                         }
 515                 } else {
 516                         buffer += words_remaining * 2;
 517                         address += words_remaining * 2;
 518                         words_remaining = 0;
 519                 }
 520         }
 521
 522         while (words_remaining > 0) {
 523                 bank_adr = address & ~0x03;
 524
 525                 /* write data command */
 526                 target_write_u16(target, bank_adr, 0x40);
 527                 target_write_memory(target, address, 2, 1, buffer + bytes_written);
 528
 529                 /* get status command */
 530                 target_write_u16(target, bank_adr, 0x70);
 531
 532                 int timeout;
 533                 for (timeout = 0; timeout < 1000; timeout++) {
 534                         target_read_u8(target, bank_adr, &status);
 535                         if (status & 0x80)
 536                                 break;
 537                         alive_sleep(1);
 538                 }
 539                 if (timeout == 1000) {
 540                         LOG_ERROR("write timed out");
 541                         return ERROR_FAIL;
 542                 }
 543
 544                 /* clear status reg and read array */
 545                 target_write_u16(target, bank_adr, 0x50);
 546                 target_write_u16(target, bank_adr, 0xFF);
 547
 548                 if (status & 0x10)
 549                         return ERROR_FLASH_OPERATION_FAILED;
 550                 else if (status & 0x02)
 551                         return ERROR_FLASH_OPERATION_FAILED;
 552
 553                 bytes_written += 2;
 554                 words_remaining--;
 555                 address += 2;
 556         }
 557
 558         if (bytes_remaining) {
 559                 uint8_t last_halfword[2] = {0xff, 0xff};
 560
 561                 /* copy the last remaining bytes into the write buffer */
 562                 memcpy(last_halfword, buffer+bytes_written, bytes_remaining);
 563
 564                 bank_adr = address & ~0x03;
 565
 566                 /* write data command */
 567                 target_write_u16(target, bank_adr, 0x40);
 568                 target_write_memory(target, address, 2, 1, last_halfword);
 569
 570                 /* query status command */
 571                 target_write_u16(target, bank_adr, 0x70);
 572
 573                 int timeout;
 574                 for (timeout = 0; timeout < 1000; timeout++) {
 575                         target_read_u8(target, bank_adr, &status);
 576                         if (status & 0x80)
 577                                 break;
 578                         alive_sleep(1);
 579                 }
 580                 if (timeout == 1000) {
 581                         LOG_ERROR("write timed out");
 582                         return ERROR_FAIL;
 583                 }
 584
 585                 /* clear status reg and read array */
 586                 target_write_u16(target, bank_adr, 0x50);
 587                 target_write_u16(target, bank_adr, 0xFF);
 588
 589                 if (status & 0x10)
 590                         return ERROR_FLASH_OPERATION_FAILED;
 591                 else if (status & 0x02)
 592                         return ERROR_FLASH_OPERATION_FAILED;
 593         }
 594
 595         return ERROR_OK;
 596 }
 597
 598 static int str9x_probe(struct flash_bank *bank)
 599 {
 600         return ERROR_OK;
 601 }
 602
 603 #if 0
 604 COMMAND_HANDLER(str9x_handle_part_id_command)
 605 {
 606         return ERROR_OK;
 607 }
 608 #endif
 609
 610 COMMAND_HANDLER(str9x_handle_flash_config_command)
 611 {
 612         struct target *target = NULL;
 613
 614         if (CMD_ARGC < 5)
 615                 return ERROR_COMMAND_SYNTAX_ERROR;
 616
 617         struct flash_bank *bank;
 618         int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
 619         if (ERROR_OK != retval)
 620                 return retval;
 621
 622         uint32_t bbsr, nbbsr, bbadr, nbbadr;
 623         COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], bbsr);
 624         COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], nbbsr);
 625         COMMAND_PARSE_NUMBER(u32, CMD_ARGV[3], bbadr);
 626         COMMAND_PARSE_NUMBER(u32, CMD_ARGV[4], nbbadr);
 627
 628         target = bank->target;
 629
 630         if (bank->target->state != TARGET_HALTED) {
 631                 LOG_ERROR("Target not halted");
 632                 return ERROR_TARGET_NOT_HALTED;
 633         }
 634
 635         /* config flash controller */
 636         target_write_u32(target, FLASH_BBSR, bbsr);
 637         target_write_u32(target, FLASH_NBBSR, nbbsr);
 638         target_write_u32(target, FLASH_BBADR, bbadr >> 2);
 639         target_write_u32(target, FLASH_NBBADR, nbbadr >> 2);
 640
 641         /* set bit 18 instruction TCM order as per flash programming manual */
 642         arm966e_write_cp15(target, 62, 0x40000);
 643
 644         /* enable flash bank 1 */
 645         target_write_u32(target, FLASH_CR, 0x18);
 646         return ERROR_OK;
 647 }
 648
 649 static const struct command_registration str9x_config_command_handlers[] = {
 650         {
 651                 .name = "flash_config",
 652                 .handler = str9x_handle_flash_config_command,
 653                 .mode = COMMAND_EXEC,
 654                 .help = "Configure str9x flash controller, prior to "
 655                         "programming the flash.",
 656                 .usage = "bank_id BBSR NBBSR BBADR NBBADR",
 657         },
 658         COMMAND_REGISTRATION_DONE
 659 };
 660
 661 static const struct command_registration str9x_command_handlers[] = {
 662         {
 663                 .name = "str9x",
 664                 .mode = COMMAND_ANY,
 665                 .help = "str9x flash command group",
 666                 .usage = "",
 667                 .chain = str9x_config_command_handlers,
 668         },
 669         COMMAND_REGISTRATION_DONE
 670 };
 671
 672 struct flash_driver str9x_flash = {
 673         .name = "str9x",
 674         .commands = str9x_command_handlers,
 675         .flash_bank_command = str9x_flash_bank_command,
 676         .erase = str9x_erase,
 677         .protect = str9x_protect,
 678         .write = str9x_write,
 679         .read = default_flash_read,
 680         .probe = str9x_probe,
 681         .auto_probe = str9x_probe,
 682         .erase_check = default_flash_blank_check,
 683         .protect_check = str9x_protect_check,
 684 };